/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the Collabora Office project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <sal/config.h>
#include <sal/log.hxx>

#include <dlgname.hxx>
#include <vcl/weld.hxx>
#include <vcl/svapp.hxx>
#include <vcl/commandevent.hxx>

#include <strings.hrc>
#include <helpids.h>

#include <cfg.hxx>
#include <SvxMenuConfigPage.hxx>
#include <SvxConfigPageHelper.hxx>
#include <dialmgr.hxx>

#include <comphelper/processfactory.hxx>

SvxMenuConfigPage::SvxMenuConfigPage(weld::Container* pPage, weld::DialogController* pController,
                                     const SfxItemSet& rSet, bool bIsMenuBar)
    : SvxConfigPage(pPage, pController, rSet)
    , m_bIsMenuBar(bIsMenuBar)
{
    m_xGearBtn = m_xBuilder->weld_menu_button(u"menugearbtn"_ustr);
    m_xGearBtn->show();
    m_xContentsListBox.reset(
        new SvxMenuEntriesListBox(m_xBuilder->weld_tree_view(u"menucontents"_ustr), this));
    weld::TreeView& rTreeView = m_xContentsListBox->get_widget();
    m_xDropTargetHelper.reset(new SvxConfigPageFunctionDropTarget(
        *this, rTreeView, m_xFunctions->get_widget(), LINK(this, SvxMenuConfigPage, DropHdl)));
    rTreeView.connect_size_allocate(LINK(this, SvxMenuConfigPage, MenuEntriesSizeAllocHdl));
    Size aSize(m_xFunctions->get_size_request());
    rTreeView.set_size_request(aSize.Width(), aSize.Height());
    MenuEntriesSizeAllocHdl(aSize);
    rTreeView.set_hexpand(true);
    rTreeView.set_vexpand(true);
    rTreeView.show();

    rTreeView.connect_selection_changed(LINK(this, SvxMenuConfigPage, SelectMenuEntry));
    rTreeView.connect_popup_menu(LINK(this, SvxMenuConfigPage, ContentContextMenuHdl));

    m_xFunctions->get_widget().connect_popup_menu(
        LINK(this, SvxMenuConfigPage, FunctionContextMenuHdl));

    m_xGearBtn->connect_selected(LINK(this, SvxMenuConfigPage, GearHdl));

    m_xCommandCategoryListBox->connect_changed(LINK(this, SvxMenuConfigPage, SelectCategory));

    m_xMoveUpButton->connect_clicked(LINK(this, SvxConfigPage, MoveHdl));
    m_xMoveDownButton->connect_clicked(LINK(this, SvxConfigPage, MoveHdl));

    m_xAddCommandButton->connect_clicked(LINK(this, SvxMenuConfigPage, AddCommandHdl));
    m_xRemoveCommandButton->connect_clicked(LINK(this, SvxMenuConfigPage, RemoveCommandHdl));

    m_xInsertBtn->connect_selected(LINK(this, SvxMenuConfigPage, InsertHdl));
    m_xModifyBtn->connect_selected(LINK(this, SvxMenuConfigPage, ModifyItemHdl));
    m_xResetBtn->connect_clicked(LINK(this, SvxMenuConfigPage, ResetMenuHdl));

    // These operations are not possible on menus/context menus yet
    m_xModifyBtn->remove_item(u"changeIcon"_ustr);
    m_xModifyBtn->remove_item(u"resetIcon"_ustr);
    m_xModifyBtn->remove_item(u"restoreItem"_ustr);

    if (!bIsMenuBar)
    {
        //TODO: Remove this when the gear button is implemented for context menus
        m_xGearBtn->set_sensitive(false);
        m_xGearBtn->hide();
    }
    else
    {
        // TODO: Remove this when it is possible to reset menubar menus individually
        m_xResetBtn->set_sensitive(false);
    }
}

void SvxMenuConfigPage::ListModified()
{
    // regenerate with the current ordering within the list
    SvxEntries* pEntries = GetTopLevelSelection()->GetEntries();
    pEntries->clear();

    for (int i = 0; i < m_xContentsListBox->n_children(); ++i)
        pEntries->push_back(weld::fromId<SvxConfigEntry*>(m_xContentsListBox->get_id(i)));

    GetSaveInData()->SetModified();
    GetTopLevelSelection()->SetModified();
    UpdateButtonStates();
}

IMPL_LINK(SvxMenuConfigPage, DropHdl, int, nTarget, void) { AddCommand(nTarget, false); }

IMPL_LINK(SvxMenuConfigPage, MenuEntriesSizeAllocHdl, const Size&, rSize, void)
{
    weld::TreeView& rTreeView = m_xContentsListBox->get_widget();
    std::vector<int> aWidths;

    int nStandardImageColWidth = rTreeView.get_checkbox_column_width();
    int nMargin = 16;

    aWidths.push_back(rSize.Width() - (nMargin + nStandardImageColWidth));
    rTreeView.set_column_fixed_widths(aWidths);
}

SvxMenuConfigPage::~SvxMenuConfigPage()
{
    for (int i = 0, nCount = m_xSaveInListBox->get_count(); i < nCount; ++i)
        delete weld::fromId<SaveInData*>(m_xSaveInListBox->get_id(i));
    m_xSaveInListBox->clear();
}

// Populates the Menu combo box
void SvxMenuConfigPage::Init()
{
    // ensure that the UI is cleared before populating it
    m_xTopLevelListBox->clear();
    m_xContentsListBox->clear();

    ReloadTopLevelListBox();

    m_xTopLevelListBox->set_active(m_xTopLevelListBox->get_count() ? 0 : -1);
    SelectElement();

    m_xCommandCategoryListBox->Init(comphelper::getProcessComponentContext(), m_xFrame,
                                    m_aModuleId);
    m_xCommandCategoryListBox->categorySelected(m_xFunctions.get(), OUString(), GetSaveInData());
    SelectFunctionHdl(m_xFunctions->get_widget());
}

IMPL_LINK_NOARG(SvxMenuConfigPage, SelectMenuEntry, weld::TreeView&, void) { UpdateButtonStates(); }

void SvxMenuConfigPage::UpdateButtonStates()
{
    // Disable Up and Down buttons depending on current selection
    int selection = m_xContentsListBox->get_selected_index();

    bool bIsSeparator
        = selection != -1
          && weld::fromId<SvxConfigEntry*>(m_xContentsListBox->get_id(selection))->IsSeparator();
    bool bIsValidSelection = (m_xContentsListBox->n_children() != 0 && selection != -1);

    m_xMoveUpButton->set_sensitive(bIsValidSelection && selection != 0);
    m_xMoveDownButton->set_sensitive(bIsValidSelection
                                     && selection != m_xContentsListBox->n_children() - 1);

    m_xRemoveCommandButton->set_sensitive(bIsValidSelection);

    m_xModifyBtn->set_sensitive(bIsValidSelection && !bIsSeparator);

    // If there is no top level selection (menu), then everything working on the right box
    // which contains the functions of the selected menu/toolbar needs to be disabled
    SvxConfigEntry* pMenuData = GetTopLevelSelection();

    m_xInsertBtn->set_sensitive(pMenuData != nullptr);

    SvxConfigEntry* selectedCmd = CreateCommandFromSelection(GetScriptURL());

    m_xAddCommandButton->set_sensitive(
        pMenuData != nullptr && !IsCommandInMenuList(selectedCmd, pMenuData->GetEntries()));

    delete selectedCmd;

    if (bIsValidSelection)
    {
        m_xRemoveCommandButton->set_sensitive(pMenuData != nullptr);
    }

    //Handle the gear button
    if (pMenuData && m_bIsMenuBar)
    {
        // Add option (gear_add) will always be enabled
        m_xGearBtn->set_item_sensitive(u"menu_gear_delete"_ustr, pMenuData->IsDeletable());
        m_xGearBtn->set_item_sensitive(u"menu_gear_rename"_ustr, pMenuData->IsRenamable());
        m_xGearBtn->set_item_sensitive(u"menu_gear_move"_ustr, pMenuData->IsMovable());
    }
}

void SvxMenuConfigPage::DeleteSelectedTopLevel()
{
    SvxConfigEntry* pMenuData = GetTopLevelSelection();

    SvxEntries* pParentEntries = FindParentForChild(GetSaveInData()->GetEntries(), pMenuData);

    SvxConfigPageHelper::RemoveEntry(pParentEntries, pMenuData);
    delete pMenuData;

    ReloadTopLevelListBox();

    GetSaveInData()->SetModified();
}

void SvxMenuConfigPage::DeleteSelectedContent()
{
    int nActEntry = m_xContentsListBox->get_selected_index();

    if (nActEntry == -1)
        return;

    // get currently selected menu entry
    SvxConfigEntry* pMenuEntry
        = weld::fromId<SvxConfigEntry*>(m_xContentsListBox->get_id(nActEntry));

    // get currently selected menu
    SvxConfigEntry* pMenu = GetTopLevelSelection();

    // remove menu entry from the list for this menu
    SvxConfigPageHelper::RemoveEntry(pMenu->GetEntries(), pMenuEntry);

    // remove menu entry from UI
    m_xContentsListBox->remove(nActEntry);

    // if this is a submenu entry, redraw the menus list box
    if (pMenuEntry->IsPopup())
    {
        ReloadTopLevelListBox();
    }

    // delete data for menu entry
    delete pMenuEntry;

    GetSaveInData()->SetModified();
    pMenu->SetModified();
}

short SvxMenuConfigPage::QueryReset()
{
    OUString msg = CuiResId(RID_CUISTR_CONFIRM_MENU_RESET);

    OUString saveInName = m_xSaveInListBox->get_active_text();

    OUString label = SvxConfigPageHelper::replaceSaveInName(msg, saveInName);

    std::unique_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(
        GetFrameWeld(), VclMessageType::Question, VclButtonsType::YesNo, label));
    return xQueryBox->run();
}

void SvxMenuConfigPage::SelectElement()
{
    weld::TreeView& rTreeView = m_xContentsListBox->get_widget();

    SvxConfigEntry* pMenuData = GetTopLevelSelection();
    if (!pMenuData)
        rTreeView.clear();
    else
    {
        SvxEntries* pEntries = pMenuData->GetEntries();

        rTreeView.bulk_insert_for_each(
            pEntries->size(), [this, &rTreeView, pEntries](weld::TreeIter& rIter, int nIdx) {
                auto const& entry = (*pEntries)[nIdx];
                OUString sId(weld::toId(entry));
                rTreeView.set_id(rIter, sId);
                InsertEntryIntoUI(entry, rTreeView, rIter, true);
            });
    }

    UpdateButtonStates();
}

IMPL_LINK(SvxMenuConfigPage, GearHdl, const OUString&, rIdent, void)
{
    if (rIdent == "menu_gear_add")
    {
        SvxMainMenuOrganizerDialog aDialog(GetFrameWeld(), GetSaveInData()->GetEntries(), nullptr,
                                           true);

        if (aDialog.run() == RET_OK)
        {
            GetSaveInData()->SetEntries(aDialog.ReleaseEntries());
            ReloadTopLevelListBox(aDialog.GetSelectedEntry());
            GetSaveInData()->SetModified();
        }
    }
    else if (rIdent == "menu_gear_delete")
    {
        DeleteSelectedTopLevel();
    }
    else if (rIdent == "menu_gear_rename")
    {
        SvxConfigEntry* pMenuData = GetTopLevelSelection();

        OUString sCurrentName(SvxConfigPageHelper::stripHotKey(pMenuData->GetName()));
        OUString sDesc = CuiResId(RID_CUISTR_LABEL_NEW_NAME);

        SvxNameDialog aNameDialog(GetFrameWeld(), sCurrentName, sDesc);
        aNameDialog.set_help_id(HID_SVX_CONFIG_RENAME_MENU);
        aNameDialog.set_title(CuiResId(RID_CUISTR_RENAME_MENU));

        if (aNameDialog.run() == RET_OK)
        {
            OUString sNewName = aNameDialog.GetName();

            if (sCurrentName == sNewName)
                return;

            pMenuData->SetName(sNewName);

            ReloadTopLevelListBox();

            GetSaveInData()->SetModified();
        }
    }
    else if (rIdent == "menu_gear_move")
    {
        SvxConfigEntry* pMenuData = GetTopLevelSelection();

        SvxMainMenuOrganizerDialog aDialog(GetFrameWeld(), GetSaveInData()->GetEntries(), pMenuData,
                                           false);
        if (aDialog.run() == RET_OK)
        {
            GetSaveInData()->SetEntries(aDialog.ReleaseEntries());

            ReloadTopLevelListBox();

            GetSaveInData()->SetModified();
        }
    }
    else
    {
        //This block should never be reached
        SAL_WARN("cui.customize", "Unknown gear menu option: " << rIdent);
        return;
    }

    UpdateButtonStates();
}

IMPL_LINK_NOARG(SvxMenuConfigPage, SelectCategory, weld::ComboBox&, void)
{
    OUString aSearchTerm(m_xSearchEdit->get_text());

    m_xCommandCategoryListBox->categorySelected(m_xFunctions.get(), aSearchTerm, GetSaveInData());

    SelectFunctionHdl(m_xFunctions->get_widget());
}

void SvxMenuConfigPage::AddCommand(int nTarget, bool bAfter)
{
    int nPos = AddFunction(nTarget, /*bAllowDuplicates*/ false, bAfter);
    if (nPos == -1)
        return;
    weld::TreeView& rTreeView = m_xContentsListBox->get_widget();
    SvxConfigEntry* pEntry = weld::fromId<SvxConfigEntry*>(rTreeView.get_id(nPos));
    InsertEntryIntoUI(pEntry, rTreeView, nPos, true);
}

IMPL_LINK_NOARG(SvxMenuConfigPage, AddCommandHdl, weld::Button&, void) { AddCommand(-1, true); }

IMPL_LINK_NOARG(SvxMenuConfigPage, RemoveCommandHdl, weld::Button&, void)
{
    DeleteSelectedContent();
    if (GetSaveInData()->IsModified())
    {
        UpdateButtonStates();
    }
}

IMPL_LINK(SvxMenuConfigPage, InsertHdl, const OUString&, rIdent, void)
{
    weld::TreeView& rTreeView = m_xContentsListBox->get_widget();
    if (rIdent == "insertseparator")
    {
        SvxConfigEntry* pNewEntryData = new SvxConfigEntry;
        pNewEntryData->SetUserDefined();
        int nPos = AppendEntry(pNewEntryData, -1, true);
        InsertEntryIntoUI(pNewEntryData, rTreeView, nPos, true);
    }
    else if (rIdent == "insertsubmenu")
    {
        OUString aNewName;
        OUString aDesc = CuiResId(RID_CUISTR_SUBMENU_NAME);

        SvxNameDialog aNameDialog(GetFrameWeld(), aNewName, aDesc);
        aNameDialog.set_help_id(HID_SVX_CONFIG_NAME_SUBMENU);
        aNameDialog.set_title(CuiResId(RID_CUISTR_ADD_SUBMENU));

        if (aNameDialog.run() == RET_OK)
        {
            aNewName = aNameDialog.GetName();

            SvxConfigEntry* pNewEntryData
                = new SvxConfigEntry(aNewName, aNewName, true, /*bParentData*/ false);
            pNewEntryData->SetName(aNewName);
            pNewEntryData->SetUserDefined();

            int nPos = AppendEntry(pNewEntryData, -1, true);
            InsertEntryIntoUI(pNewEntryData, rTreeView, nPos, true);

            ReloadTopLevelListBox();

            m_xContentsListBox->scroll_to_row(nPos);
            m_xContentsListBox->select(nPos);

            GetSaveInData()->SetModified();
        }
    }
    else
    {
        //This block should never be reached
        SAL_WARN("cui.customize", "Unknown insert option: " << rIdent);
        return;
    }

    if (GetSaveInData()->IsModified())
    {
        UpdateButtonStates();
    }
}

IMPL_LINK(SvxMenuConfigPage, ModifyItemHdl, const OUString&, rIdent, void)
{
    if (rIdent == "renameItem")
    {
        int nActEntry = m_xContentsListBox->get_selected_index();
        SvxConfigEntry* pEntry
            = weld::fromId<SvxConfigEntry*>(m_xContentsListBox->get_id(nActEntry));

        OUString aNewName(SvxConfigPageHelper::stripHotKey(pEntry->GetName()));
        OUString aDesc = CuiResId(RID_CUISTR_LABEL_NEW_NAME);

        SvxNameDialog aNameDialog(GetFrameWeld(), aNewName, aDesc);
        aNameDialog.set_help_id(HID_SVX_CONFIG_RENAME_MENU_ITEM);
        aNameDialog.set_title(CuiResId(RID_CUISTR_RENAME_MENU));

        if (aNameDialog.run() == RET_OK)
        {
            aNewName = aNameDialog.GetName();

            pEntry->SetName(aNewName);
            m_xContentsListBox->set_text(nActEntry, aNewName, 0);

            GetSaveInData()->SetModified();
            GetTopLevelSelection()->SetModified();
        }
    }
    else
    {
        //This block should never be reached
        SAL_WARN("cui.customize", "Unknown insert option: " << rIdent);
        return;
    }

    if (GetSaveInData()->IsModified())
    {
        UpdateButtonStates();
    }
}

IMPL_LINK_NOARG(SvxMenuConfigPage, ResetMenuHdl, weld::Button&, void)
{
    SvxConfigEntry* pMenuData = GetTopLevelSelection();

    if (pMenuData == nullptr)
    {
        SAL_WARN("cui.customize",
                 "RHB top level selection is null. A menu must be selected to reset!");
        return;
    }

    std::unique_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(
        GetFrameWeld(), VclMessageType::Question, VclButtonsType::YesNo,
        CuiResId(RID_CUISTR_CONFIRM_RESTORE_DEFAULT_MENU)));

    // Resetting individual top-level menus is not possible at the moment.
    // So we are resetting only if it is a context menu
    if (m_bIsMenuBar || xQueryBox->run() != RET_YES)
        return;

    sal_Int32 nPos = m_xTopLevelListBox->get_active();
    ContextMenuSaveInData* pSaveInData = static_cast<ContextMenuSaveInData*>(GetSaveInData());

    pSaveInData->ResetContextMenu(pMenuData);

    // ensure that the UI is cleared before populating it
    m_xTopLevelListBox->clear();
    m_xContentsListBox->clear();

    ReloadTopLevelListBox();

    // Reselect the reset menu
    m_xTopLevelListBox->set_active(nPos);
    SelectElement();
}

SaveInData* SvxMenuConfigPage::CreateSaveInData(
    const css::uno::Reference<css::ui::XUIConfigurationManager>& xCfgMgr,
    const css::uno::Reference<css::ui::XUIConfigurationManager>& xParentCfgMgr,
    const OUString& aModuleId, bool bDocConfig)
{
    if (!m_bIsMenuBar)
        return static_cast<SaveInData*>(
            new ContextMenuSaveInData(xCfgMgr, xParentCfgMgr, aModuleId, bDocConfig));

    return static_cast<SaveInData*>(
        new MenuSaveInData(xCfgMgr, xParentCfgMgr, aModuleId, bDocConfig));
}

IMPL_LINK(SvxMenuConfigPage, ContentContextMenuHdl, const CommandEvent&, rCEvt, bool)
{
    if (rCEvt.GetCommand() != CommandEventId::ContextMenu)
        return false;

    weld::TreeView& rTreeView = m_xContentsListBox->get_widget();

    // Select clicked entry
    std::unique_ptr<weld::TreeIter> xIter(rTreeView.make_iterator());
    if (!rTreeView.get_dest_row_at_pos(rCEvt.GetMousePosPixel(), xIter.get(), false))
        return false;
    rTreeView.select(*xIter);
    SelectMenuEntry(rTreeView);

    int nSelectIndex = m_xContentsListBox->get_selected_index();

    bool bIsSeparator
        = nSelectIndex != -1
          && weld::fromId<SvxConfigEntry*>(m_xContentsListBox->get_id(nSelectIndex))->IsSeparator();
    bool bIsValidSelection = (m_xContentsListBox->n_children() != 0 && nSelectIndex != -1);

    std::unique_ptr<weld::Builder> xBuilder(
        Application::CreateBuilder(&rTreeView, u"cui/ui/entrycontextmenu.ui"_ustr));
    auto xContextMenu = xBuilder->weld_menu(u"menu"_ustr);
    xContextMenu->set_visible(u"add"_ustr, false);
    xContextMenu->set_visible(u"remove"_ustr, bIsValidSelection);
    xContextMenu->set_visible(u"rename"_ustr, bIsValidSelection && !bIsSeparator);
    xContextMenu->set_visible(u"changeIcon"_ustr, false);
    xContextMenu->set_visible(u"resetIcon"_ustr, false);
    xContextMenu->set_visible(u"restoreDefault"_ustr, false);
    OUString sCommand(xContextMenu->popup_at_rect(
        &rTreeView, tools::Rectangle(rCEvt.GetMousePosPixel(), Size(1, 1))));

    if (sCommand == "remove")
    {
        RemoveCommandHdl(*m_xRemoveCommandButton);
    }
    else if (sCommand == "rename")
    {
        ModifyItemHdl(u"renameItem"_ustr);
    }
    else if (!sCommand.isEmpty())
        SAL_WARN("cui.customize", "Unknown context menu action: " << sCommand);
    return true;
}

IMPL_LINK(SvxMenuConfigPage, FunctionContextMenuHdl, const CommandEvent&, rCEvt, bool)
{
    if (rCEvt.GetCommand() != CommandEventId::ContextMenu)
        return false;

    weld::TreeView& rTreeView = m_xFunctions->get_widget();

    // Select clicked entry
    std::unique_ptr<weld::TreeIter> xIter(rTreeView.make_iterator());
    if (!rTreeView.get_dest_row_at_pos(rCEvt.GetMousePosPixel(), xIter.get(), false))
        return false;
    rTreeView.select(*xIter);
    SelectFunctionHdl(rTreeView);

    std::unique_ptr<weld::Builder> xBuilder(
        Application::CreateBuilder(&rTreeView, u"cui/ui/entrycontextmenu.ui"_ustr));
    auto xContextMenu = xBuilder->weld_menu(u"menu"_ustr);
    xContextMenu->set_visible(u"add"_ustr, true);
    xContextMenu->set_visible(u"remove"_ustr, false);
    xContextMenu->set_visible(u"rename"_ustr, false);
    xContextMenu->set_visible(u"changeIcon"_ustr, false);
    xContextMenu->set_visible(u"resetIcon"_ustr, false);
    xContextMenu->set_visible(u"restoreDefault"_ustr, false);
    OUString sCommand(xContextMenu->popup_at_rect(
        &rTreeView, tools::Rectangle(rCEvt.GetMousePosPixel(), Size(1, 1))));

    if (sCommand == "add")
    {
        AddCommandHdl(*m_xAddCommandButton);
    }
    else if (!sCommand.isEmpty())
        SAL_WARN("cui.customize", "Unknown context menu action: " << sCommand);
    return true;
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */