/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the Collabora Office project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 */

#include <config_pdfimport.h>
#include <test/unoapixml_test.hxx>

#include <com/sun/star/beans/XPropertySet.hpp>
#include <com/sun/star/drawing/XDrawPagesSupplier.hpp>
#include <com/sun/star/drawing/XDrawPage.hpp>
#include <com/sun/star/text/XTextRange.hpp>
#include <com/sun/star/drawing/FillStyle.hpp>
#include <com/sun/star/drawing/LineStyle.hpp>
#include <com/sun/star/drawing/PolyPolygonBezierCoords.hpp>
#include <com/sun/star/drawing/HomogenMatrix3.hpp>
#include <com/sun/star/drawing/XDrawView.hpp>
#include <com/sun/star/xml/crypto/SEInitializer.hpp>
#include <com/sun/star/view/XSelectionSupplier.hpp>

#include <extendedprimitive2dxmldump.hxx>
#include <rtl/ustring.hxx>
#include <vcl/virdev.hxx>
#include <svx/sdr/contact/displayinfo.hxx>
#include <svx/sdr/contact/viewcontact.hxx>
#include <svx/sdr/contact/viewobjectcontact.hxx>
#include <svx/svdtrans.hxx>
#include <svx/svdorect.hxx>
#include <svx/unopage.hxx>
#include <svx/svdview.hxx>
#include <svx/xlineit0.hxx>
#include <svx/xlnstwit.hxx>
#include <svx/svdogrp.hxx>
#include <comphelper/propertyvalue.hxx>
#include <sfx2/viewsh.hxx>
#include <svl/itempool.hxx>
#include <svx/svdomedia.hxx>
#include <vcl/filter/PDFiumLibrary.hxx>
#include <comphelper/sequenceashashmap.hxx>
#include <sfx2/sfxbasemodel.hxx>
#include <svx/signaturelinehelper.hxx>
#include <sfx2/objsh.hxx>

#include <sdr/contact/objectcontactofobjlistpainter.hxx>
#include <tools/XPath.hxx>

using namespace ::com::sun::star;

namespace
{
/// Tests for svx/source/svdraw/ code.
class SvdrawTest : public UnoApiXmlTest
{
private:
    uno::Reference<xml::crypto::XSEInitializer> mxSEInitializer;
    uno::Reference<xml::crypto::XXMLSecurityContext> mxSecurityContext;

public:
    SvdrawTest()
        : UnoApiXmlTest(u"svx/qa/unit/data/"_ustr)
    {
    }

    void setUp() override;

#if ENABLE_PDFIMPORT
    uno::Reference<xml::crypto::XXMLSecurityContext>& getSecurityContext()
    {
        return mxSecurityContext;
    }
#endif

protected:
    SdrPage* getFirstDrawPageWithAssert();
};

void SvdrawTest::setUp()
{
    UnoApiTest::setUp();
    MacrosTest::setUpX509(m_directories, u"svx_unit"_ustr);

    mxSEInitializer = xml::crypto::SEInitializer::create(m_xContext);
    mxSecurityContext = mxSEInitializer->createSecurityContext(OUString());
}

SdrPage* SvdrawTest::getFirstDrawPageWithAssert()
{
    uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent,
                                                                   uno::UNO_QUERY_THROW);
    CPPUNIT_ASSERT(xDrawPagesSupplier.is());
    uno::Reference<drawing::XDrawPages> xDrawPages(xDrawPagesSupplier->getDrawPages());
    uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY_THROW);
    CPPUNIT_ASSERT(xDrawPage.is());

    auto pDrawPage = dynamic_cast<SvxDrawPage*>(xDrawPage.get());
    CPPUNIT_ASSERT(pDrawPage);
    return pDrawPage->GetSdrPage();
}

xmlDocUniquePtr lcl_dumpAndParseFirstObjectWithAssert(SdrPage* pSdrPage)
{
    ScopedVclPtrInstance<VirtualDevice> aVirtualDevice;
    sdr::contact::ObjectContactOfObjListPainter aObjectContact(*aVirtualDevice,
                                                               { pSdrPage->GetObj(0) }, nullptr);
    const auto& rDrawPageVOContact
        = pSdrPage->GetViewContact().GetViewObjectContact(aObjectContact);
    sdr::contact::DisplayInfo aDisplayInfo;
    drawinglayer::primitive2d::Primitive2DContainer xPrimitiveSequence;
    rDrawPageVOContact.getPrimitive2DSequenceHierarchy(aDisplayInfo, xPrimitiveSequence);

    svx::ExtendedPrimitive2dXmlDump aDumper;
    xmlDocUniquePtr pXmlDoc = aDumper.dumpAndParse(xPrimitiveSequence);
    CPPUNIT_ASSERT(pXmlDoc);
    return pXmlDoc;
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testSemiTransparentText)
{
    // Create a new Draw document with a rectangle.
    loadFromURL(u"private:factory/sdraw"_ustr);
    uno::Reference<lang::XMultiServiceFactory> xFactory(mxComponent, uno::UNO_QUERY);
    uno::Reference<drawing::XShape> xShape(
        xFactory->createInstance(u"com.sun.star.drawing.RectangleShape"_ustr), uno::UNO_QUERY);
    xShape->setSize(awt::Size(10000, 10000));
    xShape->setPosition(awt::Point(1000, 1000));

    uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
    uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0),
                                                 uno::UNO_QUERY);
    xDrawPage->add(xShape);

    // Add semi-transparent text on the rectangle.
    uno::Reference<text::XTextRange> xShapeText(xShape, uno::UNO_QUERY);
    xShapeText->getText()->setString(u"hello"_ustr);

    uno::Reference<beans::XPropertySet> xShapeProperties(xShape, uno::UNO_QUERY);
    xShapeProperties->setPropertyValue(u"CharColor"_ustr, cpo::uno::Any(COL_RED));
    sal_Int16 nTransparence = 75;
    xShapeProperties->setPropertyValue(u"CharTransparence"_ustr, cpo::uno::Any(nTransparence));

    // Generates drawinglayer primitives for the page.
    auto pDrawPage = dynamic_cast<SvxDrawPage*>(xDrawPage.get());
    CPPUNIT_ASSERT(pDrawPage);
    SdrPage* pSdrPage = pDrawPage->GetSdrPage();
    xmlDocUniquePtr pDocument = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);

    // Make sure the text is semi-transparent.
    // Without the accompanying fix in place, this test would have failed with:
    // - Expected: 1
    // - Actual  : 0
    // - XPath '//unifiedtransparence' number of nodes is incorrect
    // i.e. the text was just plain red, not semi-transparent.
    sal_Int16 fTransparence
        = getXPath(pDocument, "//unifiedtransparence", "transparence").toInt32();
    CPPUNIT_ASSERT_EQUAL(nTransparence, fTransparence);
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testHandlePathObjScale)
{
    // Given a path object:
    loadFromURL(u"private:factory/sdraw"_ustr);
    uno::Reference<lang::XMultiServiceFactory> xFactory(mxComponent, uno::UNO_QUERY);
    uno::Reference<drawing::XShape> xShape(
        xFactory->createInstance(u"com.sun.star.drawing.ClosedBezierShape"_ustr), uno::UNO_QUERY);

    // When setting its scale by both using setSize() and scaling in a transform matrix:
    // Set size and basic properties.
    xShape->setPosition(awt::Point(2512, 6062));
    xShape->setSize(awt::Size(112, 112));
    uno::Reference<beans::XPropertySet> xShapeProps(xShape, uno::UNO_QUERY);
    xShapeProps->setPropertyValue(u"FillStyle"_ustr, cpo::uno::Any(drawing::FillStyle_SOLID));
    xShapeProps->setPropertyValue(u"LineStyle"_ustr, cpo::uno::Any(drawing::LineStyle_SOLID));
    xShapeProps->setPropertyValue(u"FillColor"_ustr, cpo::uno::Any(static_cast<sal_Int32>(0)));
    // Add it to the draw page.
    uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
    uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0),
                                                 uno::UNO_QUERY);
    xDrawPage->add(xShape);
    // Set polygon coordinates.
    drawing::PolyPolygonBezierCoords aPolyPolygonBezierCoords;
    aPolyPolygonBezierCoords.Coordinates = {
        {
            awt::Point(2624, 6118),
            awt::Point(2624, 6087),
            awt::Point(2599, 6062),
            awt::Point(2568, 6062),
            awt::Point(2537, 6062),
            awt::Point(2512, 6087),
            awt::Point(2512, 6118),
            awt::Point(2512, 6149),
            awt::Point(2537, 6175),
            awt::Point(2568, 6174),
            awt::Point(2599, 6174),
            awt::Point(2625, 6149),
            awt::Point(2624, 6118),
        },
    };
    aPolyPolygonBezierCoords.Flags = {
        {
            drawing::PolygonFlags_NORMAL,
            drawing::PolygonFlags_CONTROL,
            drawing::PolygonFlags_CONTROL,
            drawing::PolygonFlags_NORMAL,
            drawing::PolygonFlags_CONTROL,
            drawing::PolygonFlags_CONTROL,
            drawing::PolygonFlags_NORMAL,
            drawing::PolygonFlags_CONTROL,
            drawing::PolygonFlags_CONTROL,
            drawing::PolygonFlags_NORMAL,
            drawing::PolygonFlags_CONTROL,
            drawing::PolygonFlags_CONTROL,
            drawing::PolygonFlags_NORMAL,
        },
    };
    xShapeProps->setPropertyValue(u"PolyPolygonBezier"_ustr,
                                  cpo::uno::Any(aPolyPolygonBezierCoords));
    drawing::HomogenMatrix3 aMatrix;
    aMatrix.Line1.Column1 = 56;
    aMatrix.Line2.Column1 = -97;
    aMatrix.Line3.Column1 = 0;
    aMatrix.Line1.Column2 = 97;
    aMatrix.Line2.Column2 = 56;
    aMatrix.Line3.Column2 = 0;
    aMatrix.Line1.Column3 = 3317;
    aMatrix.Line2.Column3 = 5583;
    aMatrix.Line3.Column3 = 1;
    xShapeProps->setPropertyValue(u"Transformation"_ustr, cpo::uno::Any(aMatrix));

    // Then make sure the scaling is only applied once:
    // Without the accompanying fix in place, this test would have failed with:
    // - Expected: 113
    // - Actual  : 12566
    // i.e. the scaling was applied twice.
    CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(113), xShape->getSize().Width);
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testTextEditEmptyGrabBag)
{
    // Adapted this test to work with a *real* SmartArt/Diagram (SA). The former
    // test created a 'fake' one and checked if on TextEdit The GrabBag gets deleted.
    // The updated SA text edit *tries* to keep the SA Data (in DiagramHelper_svx
    // attached to SdrObjGroup). It clears the GrabBag, but only if a 'real' SA
    // exists.
    // Thus I added a bugdoc for that task which contains a 'real' SA to test
    // if GrabBag gets cleared on change of the SA model data.

    // load document
    loadFromFile(u"tdf132368.pptx");

    // get DrawPage
    uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
    uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0),
                                                 uno::UNO_QUERY);

    // get 1st object, this is the SA. Get as GroupObject
    uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(0), uno::UNO_QUERY);
    uno::Reference<drawing::XShapes> xGroupShape(xShape, uno::UNO_QUERY);

    // get the GrabBag. After import there may be values, but none anymore
    // starting with 'OOX.*', these are now at the DiagramHelper
    cpo::uno::Sequence<beans::PropertyValue> aGrabBag;
    uno::Reference<beans::XPropertySet> xGroupProps(xGroupShape, uno::UNO_QUERY);
    xGroupProps->getPropertyValue(u"InteropGrabBag"_ustr) >>= aGrabBag;

    if (aGrabBag.hasElements())
    {
        for (sal_Int32 i = 0; i < aGrabBag.getLength(); ++i)
        {
            if (aGrabBag[i].Name.startsWith("OOX"))
                CPPUNIT_ASSERT(false);
        }
    }

    // get the 1st text shape (containing 'A'). There is a BGShape and an Arrow
    // in indices before
    uno::Reference<drawing::XShape> xShapeA(xGroupShape->getByIndex(2), uno::UNO_QUERY);

    // TextEdit: insert a char at the start
    SfxViewShell* pViewShell = SfxViewShell::Current();
    CPPUNIT_ASSERT(pViewShell);
    SdrView* pSdrView = pViewShell->GetDrawView();
    SdrObject* pObject = SdrObject::getSdrObjectFromXShape(xShapeA);
    pSdrView->SdrBeginTextEdit(pObject);
    EditView& rEditView = pSdrView->GetTextEditOutlinerView()->GetEditView();
    rEditView.InsertText(u"X"_ustr);
    pSdrView->SdrEndTextEdit();

    // make sure the grab-bag is empty after change
    xGroupProps->getPropertyValue(u"InteropGrabBag"_ustr) >>= aGrabBag;
    CPPUNIT_ASSERT(!aGrabBag.hasElements());

    // get SdrObjGroup and check, it should still be a Diagram
    SdrObjGroup* pGroup = dynamic_cast<SdrObjGroup*>(SdrObject::getSdrObjectFromXShape(xShape));
    CPPUNIT_ASSERT(nullptr != pGroup);
    CPPUNIT_ASSERT(pGroup->isDiagram());
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testRectangleObject)
{
    std::unique_ptr<SdrModel> pModel(new SdrModel(nullptr, nullptr, true));
    rtl::Reference<SdrPage> pPage(new SdrPage(*pModel, false));
    pPage->SetSize(Size(1000, 1000));
    pModel->InsertPage(pPage.get(), 0);

    tools::Rectangle aSize(Point(), Size(100, 100));
    rtl::Reference<SdrRectObj> pRectangle = new SdrRectObj(*pModel, aSize);
    pPage->NbcInsertObject(pRectangle.get());
    pRectangle->SetMergedItem(XLineStyleItem(drawing::LineStyle_SOLID));
    pRectangle->SetMergedItem(XLineStartWidthItem(200));

    ScopedVclPtrInstance<VirtualDevice> aVirtualDevice;
    aVirtualDevice->SetOutputSize(Size(2000, 2000));

    SdrView aView(*pModel, aVirtualDevice);
    aView.hideMarkHandles();
    aView.ShowSdrPage(pPage.get());

    sdr::contact::ObjectContactOfObjListPainter aObjectContact(*aVirtualDevice,
                                                               { pPage->GetObj(0) }, nullptr);
    const sdr::contact::ViewObjectContact& rDrawPageVOContact
        = pPage->GetViewContact().GetViewObjectContact(aObjectContact);

    sdr::contact::DisplayInfo aDisplayInfo;
    drawinglayer::primitive2d::Primitive2DContainer xPrimitiveSequence;
    rDrawPageVOContact.getPrimitive2DSequenceHierarchy(aDisplayInfo, xPrimitiveSequence);

    svx::ExtendedPrimitive2dXmlDump aDumper;
    xmlDocUniquePtr pXmlDoc = aDumper.dumpAndParse(xPrimitiveSequence);

    tools::XPath aPath(pXmlDoc.get());
    CPPUNIT_ASSERT(aPath.create("/primitive2D"));

    auto aPolyPoly = aPath.create("/primitive2D/sdrrectangle/group/polypolygoncolor");
    CPPUNIT_ASSERT(aPolyPoly);
    CPPUNIT_ASSERT_EQUAL(u"#729fcf"_ustr, aPolyPoly->attribute("color"));

    auto aPolyPolyPath = aPath.create(aPolyPoly, "/polypolygon");
    CPPUNIT_ASSERT(aPolyPolyPath);
    CPPUNIT_ASSERT_EQUAL(1, aPolyPolyPath->count());
    auto aPolyPolyElement = aPolyPolyPath->at(0);
    CPPUNIT_ASSERT_EQUAL(u"99"_ustr, aPolyPolyElement->attribute(
                                         "height")); // weird Rectangle is created with size 100
    CPPUNIT_ASSERT_EQUAL(u"99"_ustr, aPolyPolyElement->attribute("width"));
    CPPUNIT_ASSERT_EQUAL(u"0"_ustr, aPolyPolyElement->attribute("minx"));
    CPPUNIT_ASSERT_EQUAL(u"0"_ustr, aPolyPolyElement->attribute("miny"));
    CPPUNIT_ASSERT_EQUAL(u"99"_ustr, aPolyPolyElement->attribute("maxx"));
    CPPUNIT_ASSERT_EQUAL(u"99"_ustr, aPolyPolyElement->attribute("maxy"));

    auto aPolyPath
        = aPath.create("/primitive2D/sdrrectangle/group/polypolygoncolor/polypolygon/polygon");
    CPPUNIT_ASSERT(aPolyPath);
    auto aPoints = aPath.create(aPolyPath, "/point");
    CPPUNIT_ASSERT_EQUAL(5, aPoints->count());
    CPPUNIT_ASSERT_EQUAL(u"49.5"_ustr, aPoints->at(0)->attribute("x"));
    CPPUNIT_ASSERT_EQUAL(u"99"_ustr, aPoints->at(0)->attribute("y"));
    CPPUNIT_ASSERT_EQUAL(u"0"_ustr, aPoints->at(1)->attribute("x"));
    CPPUNIT_ASSERT_EQUAL(u"99"_ustr, aPoints->at(1)->attribute("y"));
    CPPUNIT_ASSERT_EQUAL(u"0"_ustr, aPoints->at(2)->attribute("x"));
    CPPUNIT_ASSERT_EQUAL(u"0"_ustr, aPoints->at(2)->attribute("y"));
    CPPUNIT_ASSERT_EQUAL(u"99"_ustr, aPoints->at(3)->attribute("x"));
    CPPUNIT_ASSERT_EQUAL(u"0"_ustr, aPoints->at(3)->attribute("y"));
    CPPUNIT_ASSERT_EQUAL(u"99"_ustr, aPoints->at(4)->attribute("x"));
    CPPUNIT_ASSERT_EQUAL(u"99"_ustr, aPoints->at(4)->attribute("y"));

    auto aStrokePath = aPath.create("/primitive2D/sdrrectangle/group/polygonstroke");
    CPPUNIT_ASSERT(aStrokePath);
    CPPUNIT_ASSERT_EQUAL(1, aStrokePath->count());

    auto aLinePath = aPath.create(aStrokePath, "/line");
    CPPUNIT_ASSERT_EQUAL(u"#3465a4"_ustr, aLinePath->attribute("color"));
    CPPUNIT_ASSERT_EQUAL(u"0"_ustr, aLinePath->attribute("width"));
    CPPUNIT_ASSERT_EQUAL(u"Round"_ustr, aLinePath->attribute("linejoin"));
    CPPUNIT_ASSERT_EQUAL(u"BUTT"_ustr, aLinePath->attribute("linecap"));

    auto aLineContentPath = aPath.create(aStrokePath, "/polygon");
    CPPUNIT_ASSERT_EQUAL(u"49.5,99 0,99 0,0 99,0 99,99"_ustr, aLineContentPath->content());

    // If solid line, then there is no line stroke information
    CPPUNIT_ASSERT_EQUAL(0, aPath.create(aStrokePath, "/stroke")->count());

    pPage->RemoveObject(0);
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testAutoHeightMultiColShape)
{
    // Given a document containing a shape that has:
    // 1) automatic height (resize shape to fix text)
    // 2) multiple columns (2)
    loadFromFile(u"auto-height-multi-col-shape.pptx");

    // Make sure the in-file shape height is kept, even if nominally the shape height is
    // automatic:
    uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent, uno::UNO_QUERY);
    uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPagesSupplier->getDrawPages()->getByIndex(0),
                                                 uno::UNO_QUERY);
    uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(0), uno::UNO_QUERY);
    // Without the accompanying fix in place, this test would have failed with:
    // - Expected: 6882
    // - Actual  : 3452
    // i.e. the shape height was smaller than expected, leading to a 2 columns layout instead of
    // laying out all the text in the first column.
    // 2477601 is from slide1.xml, <a:ext cx="4229467" cy="2477601"/>.
    CPPUNIT_ASSERT_DOUBLES_EQUAL(
        static_cast<sal_Int32>(o3tl::convert(2477601, o3tl::Length::emu, o3tl::Length::mm100)),
        xShape->getSize().Height, 1);
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testFontWorks)
{
    loadFromFile(u"FontWork.odg");

    uno::Reference<drawing::XDrawPagesSupplier> xDrawPagesSupplier(mxComponent,
                                                                   uno::UNO_QUERY_THROW);
    CPPUNIT_ASSERT(xDrawPagesSupplier.is());
    uno::Reference<drawing::XDrawPages> xDrawPages(xDrawPagesSupplier->getDrawPages());
    uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY_THROW);
    CPPUNIT_ASSERT(xDrawPage.is());
    uno::Reference<drawing::XShape> xShape(xDrawPage->getByIndex(0), uno::UNO_QUERY);
    CPPUNIT_ASSERT(xShape.is());

    auto pDrawPage = dynamic_cast<SvxDrawPage*>(xDrawPage.get());
    CPPUNIT_ASSERT(pDrawPage);
    SdrPage* pSdrPage = pDrawPage->GetSdrPage();
    xmlDocUniquePtr pXmlDoc = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);

    tools::XPath aXPath(pXmlDoc.get());
    CPPUNIT_ASSERT_EQUAL(1, aXPath.create("/primitive2D")->count());
    CPPUNIT_ASSERT_EQUAL(u"Perspective"_ustr,
                         aXPath.create("//scene")->attribute("projectionMode"));

    auto aFillPath = aXPath.create("//scene/extrude3D[1]/fill");
    CPPUNIT_ASSERT_EQUAL(u"#ff0000"_ustr, aFillPath->attribute("color"));

    auto aMaterialPath = aXPath.create("//scene/extrude3D[1]/object3Dattributes/material");
    CPPUNIT_ASSERT_EQUAL(u"#ff0000"_ustr, aMaterialPath->attribute("color"));

    // ODF default 50% is represented by Specular Intensity = 2^5. The relationship is not linear.
    CPPUNIT_ASSERT_EQUAL(u"32"_ustr, aMaterialPath->attribute("specularIntensity"));
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testTdf148000_EOLinCurvedText)
{
    std::vector<OUString> aFilenames
        = { u"tdf148000_EOLinCurvedText.pptx"_ustr, u"tdf148000_EOLinCurvedText_New.odp"_ustr,
            u"tdf148000_EOLinCurvedText_Legacy.odp"_ustr };

    for (int i = 0; i < 3; i++)
    {
        loadFromFile(aFilenames[i]);

        SdrPage* pSdrPage = getFirstDrawPageWithAssert();

        xmlDocUniquePtr pXmlDoc = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);
        tools::XPath aXPath(pXmlDoc.get());

        // this is a group shape, hence 2 nested objectinfo
        auto aBasePath = aXPath.create("/primitive2D/objectinfo[4]/objectinfo/unhandled/group/"
                                       "unhandled/group/polypolygoncolor/polypolygon");

        // The text is: "O" + eop + "O" + eol + "O"
        // It should be displayed as 3 line of text. (1 "O" letter in every line)

        sal_Int32 nY1 = aXPath.create(aBasePath, "/polygon[1]/point[1]")->attribute("y").toInt32();
        sal_Int32 nY2 = aXPath.create(aBasePath, "/polygon[3]/point[1]")->attribute("y").toInt32();
        sal_Int32 nY3 = aXPath.create(aBasePath, "/polygon[5]/point[1]")->attribute("y").toInt32();

        sal_Int32 nDiff21 = nY2 - nY1;
        sal_Int32 nDiff32 = nY3 - nY2;

        // the 2. "O" must be positioned much lower as the 1. "O". (the eop break the line)
        CPPUNIT_ASSERT_GREATER(sal_Int32(300), nDiff21);
        if (i < 2)
        {
            // the 3. "O" must be positioned even lower with 1 line. (the eol must break the line as well)
            CPPUNIT_ASSERT_LESS(sal_Int32(50), abs(nDiff32 - nDiff21));
        }
        else
        {
            // In legacy mode, the 3. "O" must be positioned about the same high as the 2. "O"
            // the eol not break the line.
            CPPUNIT_ASSERT_LESS(sal_Int32(50), nDiff32);
        }
    }
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testTdf148000_CurvedTextWidth)
{
    std::vector<OUString> aFilenames
        = { u"tdf148000_CurvedTextWidth.pptx"_ustr, u"tdf148000_CurvedTextWidth_New.odp"_ustr,
            u"tdf148000_CurvedTextWidth_Legacy.odp"_ustr };

    for (int i = 0; i < 3; i++)
    {
        loadFromFile(aFilenames[i]);

        SdrPage* pSdrPage = getFirstDrawPageWithAssert();

        xmlDocUniquePtr pXmlDoc = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);
        tools::XPath aXPath(pXmlDoc.get());

        auto aBasePath = aXPath.create("/primitive2D/objectinfo[4]/objectinfo/unhandled/group/"
                                       "unhandled/group/polypolygoncolor/polypolygon");

        // The text is: 7 line od "OOOOOOO"
        // Take the x coord of the 4 "O" on the corners
        sal_Int32 nX1 = aXPath.create(aBasePath, "/polygon[1]/point[1]")->attribute("x").toInt32();
        sal_Int32 nX2 = aXPath.create(aBasePath, "/polygon[13]/point[1]")->attribute("x").toInt32();
        sal_Int32 nX3 = aXPath.create(aBasePath, "/polygon[85]/point[1]")->attribute("x").toInt32();
        sal_Int32 nX4 = aXPath.create(aBasePath, "/polygon[97]/point[1]")->attribute("x").toInt32();

        if (i < 2)
        {
            // All the lines should be positioned similar (start/end is similar)
            CPPUNIT_ASSERT_LESS(sal_Int32(150), abs(nX3 - nX1));
            CPPUNIT_ASSERT_LESS(sal_Int32(150), abs(nX4 - nX2));
        }
        else
        {
            // In legacy mode, the outer lines become much wider
            CPPUNIT_ASSERT_GREATER(sal_Int32(1500), nX3 - nX1);
            CPPUNIT_ASSERT_GREATER(sal_Int32(1500), nX2 - nX4);
        }
    }
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testSurfaceMetal)
{
    loadFromFile(u"tdf140321_metal.odp");

    SdrPage* pSdrPage = getFirstDrawPageWithAssert();

    xmlDocUniquePtr pXmlDoc = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);

    // ODF specifies for metal = true specular color as rgb(200,200,200) and adding 15 to specularity
    // Together with extrusion-first-light-level 67% and extrusion-specularity 80% factor is
    // 0.67*0.8 * 200/255 = 0.42 and color #6b6b6b
    assertXPath(pXmlDoc, "(//material)[1]", "specular", u"#6b6b6b");
    // 3D specularIntensity = 2^(50/10) + 15 = 47, with default extrusion-shininess 50%
    assertXPath(pXmlDoc, "(//material)[1]", "specularIntensity", u"47");
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testExtrusionPhong)
{
    loadFromFile(u"tdf140321_phong.odp");

    SdrPage* pSdrPage = getFirstDrawPageWithAssert();

    xmlDocUniquePtr pXmlDoc = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);

    // The rendering method and normals kind were always 'Flat' without the patch.
    assertXPath(pXmlDoc, "//scene", "shadeMode", u"Phong");
    assertXPath(pXmlDoc, "//object3Dattributes", "normalsKind", u"Specific");
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testSurfaceMattePPT)
{
    loadFromFile(u"tdf140321_Matte_import.ppt");

    SdrPage* pSdrPage = getFirstDrawPageWithAssert();

    xmlDocUniquePtr pXmlDoc = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);

    // The preset 'matte' sets the specularity of material to 0. But that alone does not make the
    // rendering 'matte' in LO. To get a 'matte' effect in LO, specularity of the light need to be
    // false in addition. To get this, first light is set off and values from first light are copied
    // to forth light, as only first light is specular. Because first and third lights are off, the
    // forth light is the second one in the dump. The gray color corresponding to
    // FirstLightLevel = 38000/2^16 is #949494.
    assertXPath(pXmlDoc, "(//material)[1]", "specular", u"#000000");
    assertXPath(pXmlDoc, "(//light)[2]", "color", u"#949494");
    // To make the second light soft, part of its intensity is moved to lights 5,6,7 and 8.
    assertXPath(pXmlDoc, "(//light)[1]", "color", u"#1e1e1e");
    assertXPath(pXmlDoc, "(//light)[3]", "color", u"#3b3b3b");
    // The 3D property specularIntensity is not related to 'extrusion-specularity' but to
    // 'extrusion-shininess'. specularIntensity = 2^(shininess/10), here default 32.
    assertXPath(pXmlDoc, "(//material)[1]", "specularIntensity", u"32");
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testMaterialSpecular)
{
    loadFromFile(u"tdf140321_material_specular.odp");

    SdrPage* pSdrPage = getFirstDrawPageWithAssert();

    xmlDocUniquePtr pXmlDoc = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);
    CPPUNIT_ASSERT(pXmlDoc);

    // 3D specular color is derived from properties 'extrusion-specularity' and 'extrusion-first-light
    // -level'. 3D specularIntensity is derived from property 'draw:extrusion-shininess'. Both are
    // object properties, not scene properties. Those were wrong in various forms before the patch.
    // Specularity = 77% * first-light-level 67% = 0.5159, which corresponds to gray color #848484.
    assertXPath(pXmlDoc, "(//material)[1]", "specular", u"#848484");
    // extrusion-shininess 50% corresponds to 3D specularIntensity 32, use 2^(50/10).
    assertXPath(pXmlDoc, "(//material)[1]", "specularIntensity", u"32");
    // extrusion-first-light-level 67% corresponds to gray color #ababab, use 255 * 0.67.
    assertXPath(pXmlDoc, "(//light)[1]", "color", u"#ababab");
    // The first light is harsh, the second light soft. So the 3D scene should have 6 lights (1+1+4).
    assertXPath(pXmlDoc, "//light", 6);
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testVideoSnapshot)
{
    // Given a slide with a media shape, containing a 4 sec video, red-green-blue-black being the 4
    // seconds:
    loadFromFile(u"video-snapshot.pptx");
    SdrPage* pSdrPage = getFirstDrawPageWithAssert();
    auto pSdrMediaObj = dynamic_cast<SdrMediaObj*>(pSdrPage->GetObj(0));

    // When getting the red snapshot of the video:
    Graphic aSnapshot(pSdrMediaObj->getSnapshot());

    // Then make sure the color is correct:
    const Bitmap& rBitmap = aSnapshot.GetBitmapRef();
    // Without the accompanying fix in place, this test would have failed with:
    // - Expected: rgba[ff0000ff]
    // - Actual  : rgba[000000ff]
    // i.e. the preview was black, not ~red; since we seeked 3 secs into the video, while PowerPoint
    // doesn't do that.
    CPPUNIT_ASSERT_EQUAL(Color(0xfe, 0x0, 0x0), rBitmap.GetPixelColor(0, 0));

    // Without the accompanying fix in place, this test would have failed with:
    // - Expected: 321
    // - Actual  : 640
    // i.e. ~25% crop from left and right should result in half width, but it was not reduced.
    CPPUNIT_ASSERT_EQUAL(static_cast<tools::Long>(321), rBitmap.GetSizePixel().getWidth());
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testPageViewDrawLayerClip)
{
    // Given a document with 2 pages, first page footer has an off-page line shape:
    loadFromFile(u"page-view-draw-layer-clip.docx");

    // When saving that document to PDF:
    save(TestFilter::PDF_WRITER);

    // Then make sure that line shape gets clipped:
    std::unique_ptr<vcl::pdf::PDFiumDocument> pDoc = parsePDFExport();
    if (!pDoc)
    {
        return;
    }
    std::unique_ptr<vcl::pdf::PDFiumPage> pPage1 = pDoc->openPage(0);
    CPPUNIT_ASSERT_EQUAL(3, pPage1->getObjectCount());
    std::unique_ptr<vcl::pdf::PDFiumPage> pPage2 = pDoc->openPage(1);
    // Without the accompanying fix in place, this test would have failed with:
    // - Expected: 2
    // - Actual  : 3
    // i.e. the 2nd page had a line shape from the first page's footer.
    CPPUNIT_ASSERT_EQUAL(2, pPage2->getObjectCount());
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testRectangleObjectMove)
{
    std::unique_ptr<SdrModel> pModel(new SdrModel(nullptr, nullptr, true));
    rtl::Reference<SdrPage> pPage(new SdrPage(*pModel, false));
    pPage->SetSize(Size(50000, 50000));
    pModel->InsertPage(pPage.get(), 0);

    tools::Rectangle aRect(Point(), Size(100, 100));
    rtl::Reference<SdrRectObj> pRectangleObject = new SdrRectObj(*pModel, aRect);
    pPage->NbcInsertObject(pRectangleObject.get());

    CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(), Size(100, 100)),
                         pRectangleObject->GetLogicRect());
    pRectangleObject->NbcMove({ 100, 100 });
    CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(100, 100), Size(100, 100)),
                         pRectangleObject->GetLogicRect());

    pPage->RemoveObject(0);
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testRectangleObjectRotate)
{
    std::unique_ptr<SdrModel> pModel(new SdrModel(nullptr, nullptr, true));
    rtl::Reference<SdrPage> pPage(new SdrPage(*pModel, false));
    pPage->SetSize(Size(50000, 50000));
    pModel->InsertPage(pPage.get(), 0);

    {
        tools::Rectangle aObjectSize(Point(), Size(100, 100));
        rtl::Reference<SdrRectObj> pRectangleObject = new SdrRectObj(*pModel, aObjectSize);
        pPage->NbcInsertObject(pRectangleObject.get());

        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(0, 0), Size(100, 100)),
                             pRectangleObject->GetLogicRect());
        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(0, 0), Size(100, 100)),
                             pRectangleObject->GetSnapRect());
        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(-1, -1), Size(102, 102)),
                             pRectangleObject->GetCurrentBoundRect());

        auto angle = 9000_deg100;
        double angleRadians = toRadians(angle);
        pRectangleObject->NbcRotate(aObjectSize.Center(), angle, std::sin(angleRadians),
                                    std::cos(angleRadians));

        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(0, 98), Size(100, 100)),
                             pRectangleObject->GetLogicRect());
        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(0, -1), Size(100, 100)),
                             pRectangleObject->GetSnapRect());
        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(-1, -2), Size(102, 102)),
                             pRectangleObject->GetCurrentBoundRect());

        pPage->RemoveObject(0);
    }

    {
        tools::Rectangle aObjectSize(Point(), Size(100, 100));
        rtl::Reference<SdrRectObj> pRectangleObject = new SdrRectObj(*pModel, aObjectSize);
        pPage->NbcInsertObject(pRectangleObject.get());

        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(0, 0), Size(100, 100)),
                             pRectangleObject->GetLogicRect());
        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(0, 0), Size(100, 100)),
                             pRectangleObject->GetSnapRect());
        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(-1, -1), Size(102, 102)),
                             pRectangleObject->GetCurrentBoundRect());

        auto angle = -4500_deg100;
        double angleRadians = toRadians(angle);
        pRectangleObject->NbcRotate(aObjectSize.Center(), angle, std::sin(angleRadians),
                                    std::cos(angleRadians));

        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(49, -20), Size(100, 100)),
                             pRectangleObject->GetLogicRect());
        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(-21, -20), Size(141, 141)),
                             pRectangleObject->GetSnapRect());
        CPPUNIT_ASSERT_EQUAL(tools::Rectangle(Point(-22, -21), Size(143, 143)),
                             pRectangleObject->GetCurrentBoundRect());

        pPage->RemoveObject(0);
    }
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testRotatePoint)
{
    {
        auto angle = 18000_deg100;
        double angleRadians = toRadians(angle);
        Point aPoint(2000, 1000);
        Point aReference(1000, 1000);
        RotatePoint(aPoint, aReference, std::sin(angleRadians), std::cos(angleRadians));

        CPPUNIT_ASSERT_EQUAL(Point(0, 1000), aPoint);
    }

    {
        auto angle = 9000_deg100;
        double angleRadians = toRadians(angle);
        Point aPoint(2000, 1000);
        Point aReference(1000, 1000);
        RotatePoint(aPoint, aReference, std::sin(angleRadians), std::cos(angleRadians));

        CPPUNIT_ASSERT_EQUAL(Point(1000, 0), aPoint);
    }

    {
        auto angle = 18000_deg100;
        double angleRadians = toRadians(angle);
        Point aPoint(100, 100);
        Point aReference(200, 200);
        RotatePoint(aPoint, aReference, std::sin(angleRadians), std::cos(angleRadians));

        CPPUNIT_ASSERT_EQUAL(Point(300, 300), aPoint);
    }
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testClipVerticalTextOverflow)
{
    // File contains a slide with 4 rectangle shapes with text inside
    // each have <a:bodyPr vertOverflow="clip">
    // 1-) Text overflowing the rectangle
    // 2-) Text not overflowing the rectangle
    // 3-) (Vertical text) Text overflowing the rectangle
    // 4-) (Vertical text) Text not overflowing the rectangle
    loadFromFile(u"clip-vertical-overflow.pptx");

    SdrPage* pSdrPage = getFirstDrawPageWithAssert();
    xmlDocUniquePtr pDocument = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);

    // Test vertically overflowing text
    // Without the accompanying fix in place, this test would have failed with:
    // equality assertion failed
    // - Expected: 6
    // - Actual  : 13
    // - In <>, XPath contents of child does not match
    // i.e. the vertically overflowing text wasn't clipped & overflowing text
    // was drawn anyways.
    assertXPathContent(pDocument, "count((//sdrblocktext)[4]//textsimpleportion)", u"6");

    // make sure text is aligned correctly after the overflowing text is clipped
    assertXPath(pDocument, "((//sdrblocktext)[4]//textsimpleportion)[1]", "y", u"3749");
    assertXPath(pDocument, "((//sdrblocktext)[4]//textsimpleportion)[6]", "y", u"7559");

    // make sure the text that isn't overflowing is still aligned properly
    assertXPathContent(pDocument, "count((//sdrblocktext)[5]//textsimpleportion)", u"3");
    assertXPathDoubleValue(pDocument, "((//sdrblocktext)[5]//textsimpleportion)[1]", "y", 5073.5,
                           0.001);
    assertXPathDoubleValue(pDocument, "((//sdrblocktext)[5]//textsimpleportion)[3]", "y", 6597.5,
                           0.001);

    // Test vertically overflowing text, with vertical text direction
    assertXPathContent(pDocument, "count((//sdrblocktext)[6]//textsimpleportion)", u"12");
    // make sure text is aligned correctly after the overflowing text is clipped
    assertXPath(pDocument, "((//sdrblocktext)[6]//textsimpleportion)[1]", "x", u"12964");
    assertXPath(pDocument, "((//sdrblocktext)[6]//textsimpleportion)[12]", "x", u"4582");

    // make sure the text that isn't overflowing is still aligned properly
    assertXPathContent(pDocument, "count((//sdrblocktext)[7]//textsimpleportion)", u"3");
    assertXPath(pDocument, "((//sdrblocktext)[7]//textsimpleportion)[1]", "x", u"25417");
    assertXPath(pDocument, "((//sdrblocktext)[7]//textsimpleportion)[3]", "x", u"23893");
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testContourText)
{
    loadFromFile(u"tdf84507_polygoncontourtext.fodg");
    SdrPage* pSdrPage = getFirstDrawPageWithAssert();
    xmlDocUniquePtr pXmlDoc = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);

    // The shape is rotated by 180°. The rotated shape has position (10000|12000) and size 6000x4000.
    // Text should be inside the shape and start at the bottom-right of the shape because of 180°
    // rotation. Without fix the text was rotated but positioned left-top of the shape. The first
    // line of text has started at (10000|7353), last line at (10000|5007).
    assertXPath(pXmlDoc, "(//textsimpleportion)[1]", "x", u"15998");
    assertXPath(pXmlDoc, "(//textsimpleportion)[1]", "y", u"11471");
    assertXPath(pXmlDoc, "(//textsimpleportion)[4]", "x", u"15998");
    assertXPath(pXmlDoc, "(//textsimpleportion)[4]", "y", u"9488");
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testContourTextCJK)
{
    loadFromFile(u"tdf128433_rectanglecontourtext_CJK.fodg");
    SdrPage* pSdrPage = getFirstDrawPageWithAssert();
    xmlDocUniquePtr pXmlDoc = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);

    // The rectangle has position (10000|4000) and size 4000x6000. The text in the rectangle is set
    // to tb-rl writing mode. Without fix the text was positioned left from the shape. The first line
    // of text has started at (9327|4000), the last line at (8489|4000).
    // The expected values are for font "Microsoft Yahei". Substitute fonts can have a different
    // metric despite having the same font size. Thus test with tolerance.
    // First line
    assertXPathDoubleValue(pXmlDoc, "(//textsimpleportion)[1]", "x", 13327.0, 150.0);
    // Second line
    assertXPathDoubleValue(pXmlDoc, "(//textsimpleportion)[3]", "x", 12489.0, 400.0);
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testTdf161724)
{
    loadFromFile(u"tdf161724.pptx");

    SdrPage* pSdrPage = getFirstDrawPageWithAssert();
    xmlDocUniquePtr pXmlDoc = lcl_dumpAndParseFirstObjectWithAssert(pSdrPage);

    sal_Int16 nBmpPosX = getXPath(pXmlDoc, "//bitmap", "xy13").toInt32();
    sal_Int16 nBmpPosY = getXPath(pXmlDoc, "//bitmap", "xy23").toInt32();
    sal_Int16 nBmpWidth = getXPath(pXmlDoc, "//bitmap", "xy11").toInt32();
    sal_Int16 nBmpHeight = getXPath(pXmlDoc, "//bitmap", "xy22").toInt32();

    // Without the fix in place, all these values would have been completely different
    CPPUNIT_ASSERT_EQUAL(sal_Int16(0), nBmpPosX);
    CPPUNIT_ASSERT_EQUAL(sal_Int16(6356), nBmpPosY);
    CPPUNIT_ASSERT_EQUAL(sal_Int16(9901), nBmpWidth);
    CPPUNIT_ASSERT_EQUAL(sal_Int16(12693), nBmpHeight);
}

CPPUNIT_TEST_FIXTURE(SvdrawTest, testVisualSignResize)
{
#if ENABLE_PDFIMPORT
    // Given a read-only document with a just inserted signature line:
    cpo::uno::Sequence<beans::PropertyValue> aArgs
        = { comphelper::makePropertyValue(u"ReadOnly"_ustr, true) };
    loadWithParams(createFileURL(u"empty.pdf"), aArgs);
    SfxBaseModel* pBaseModel = dynamic_cast<SfxBaseModel*>(mxComponent.get());
    CPPUNIT_ASSERT(pBaseModel);
    SfxObjectShell* pObjectShell = pBaseModel->GetObjectShell();
    CPPUNIT_ASSERT(pObjectShell);
    CPPUNIT_ASSERT(pObjectShell->IsReadOnly());
    // Add a signature line to the 2nd page.
    uno::Reference<lang::XMultiServiceFactory> xFactory(mxComponent, uno::UNO_QUERY);
    uno::Reference<drawing::XShape> xShape(
        xFactory->createInstance(u"com.sun.star.drawing.GraphicObjectShape"_ustr), uno::UNO_QUERY);
    xShape->setPosition(awt::Point(1000, 1000));
    xShape->setSize(awt::Size(10000, 10000));
    uno::Reference<drawing::XDrawPagesSupplier> xSupplier(mxComponent, uno::UNO_QUERY);
    uno::Reference<drawing::XDrawPages> xDrawPages = xSupplier->getDrawPages();
    CPPUNIT_ASSERT_EQUAL(static_cast<sal_Int32>(1), xDrawPages->getCount());

    uno::Reference<frame::XModel> xModel(mxComponent, uno::UNO_QUERY);
    uno::Reference<drawing::XDrawView> xController(xModel->getCurrentController(), uno::UNO_QUERY);
    uno::Reference<drawing::XDrawPage> xDrawPage(xDrawPages->getByIndex(0), uno::UNO_QUERY);
    xController->setCurrentPage(xDrawPage);
    xDrawPage->add(xShape);
    // Select it and assign a certificate.
    uno::Reference<view::XSelectionSupplier> xSelectionSupplier(pBaseModel->getCurrentController(),
                                                                uno::UNO_QUERY);
    xSelectionSupplier->select(cpo::uno::Any(xShape));
    auto xEnv = getSecurityContext()->getSecurityEnvironment();
    auto xCert = GetValidCertificate(xEnv->getPersonalCertificates(), xEnv);
    if (!xCert)
    {
        return;
    }
    SfxViewShell* pViewShell
        = SfxViewShell::Get(uno::Reference<frame::XController>(xController, uno::UNO_QUERY));
    svl::crypto::CertificateOrName aCertificateOrName;
    aCertificateOrName.m_xCertificate = xCert;
    svx::SignatureLineHelper::setShapeCertificate(pViewShell, aCertificateOrName);
    pObjectShell->SetModified(false);

    // When resizing the shape by moving the bottom right (last) handle towards top right:
    aArgs = {
        comphelper::makePropertyValue(u"HandleNum"_ustr, static_cast<sal_Int32>(7)),
        comphelper::makePropertyValue(u"NewPosX"_ustr, static_cast<sal_Int32>(1500)),
        comphelper::makePropertyValue(u"NewPosY"_ustr, static_cast<sal_Int32>(1500)),
    };
    dispatchCommand(mxComponent, u".uno:MoveShapeHandle"_ustr, aArgs);

    // Then make sure the size decreases:
    // Without the accompanying fix in place, this test would have failed with:
    // - Expected less than: 10000
    // - Actual  : 10000
    // i.e. you could not resize even a just inserted signature line in a read-only view.
    CPPUNIT_ASSERT_LESS(static_cast<sal_Int32>(10000), xShape->getSize().Width);
    CPPUNIT_ASSERT_LESS(static_cast<sal_Int32>(10000), xShape->getSize().Height);
#endif
}
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */