/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/*
 * This file is part of the Collabora Office project.
 *
 * This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/.
 *
 * This file incorporates work covered by the following license notice:
 *
 *   Licensed to the Apache Software Foundation (ASF) under one or more
 *   contributor license agreements. See the NOTICE file distributed
 *   with this work for additional information regarding copyright
 *   ownership. The ASF licenses this file to you under the Apache
 *   License, Version 2.0 (the "License"); you may not use this file
 *   except in compliance with the License. You may obtain a copy of
 *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
 */

#include <config_wasm_strip.h>

#include <svl/itempool.hxx>
#include <vcl/settings.hxx>
#include <vcl/ptrstyle.hxx>
#include <vcl/svapp.hxx>

#include <svx/graphctl.hxx>
#include <svx/sdr/overlay/overlaymanager.hxx>
#include <GraphCtlAccessibleContext.hxx>
#include <svx/svxids.hrc>
#include <svx/svdpage.hxx>
#include <svx/sdrpaintwindow.hxx>

void GraphCtrlUserCall::Changed( const SdrObject& rObj, SdrUserCallType eType, const tools::Rectangle& /*rOldBoundRect*/ )
{
    switch( eType )
    {
        case SdrUserCallType::MoveOnly:
        case SdrUserCallType::Resize:
            m_rWin.SdrObjChanged( rObj );
        break;

        case SdrUserCallType::Inserted:
            m_rWin.SdrObjCreated( rObj );
        break;

        default:
        break;
    }
    m_rWin.QueueIdleUpdate();
}

GraphCtrl::GraphCtrl(weld::Dialog* pDialog)
    : maUpdateIdle("svx GraphCtrl Update")
    , maMap100(MapUnit::Map100thMM)
    , meObjKind(SdrObjKind::NONE)
    , mnPolyEdit(0)
    , mbEditMode(false)
    , mbSdrMode(false)
    , mbInIdleUpdate(false)
    , mpDialog(pDialog)
{
    mpUserCall.reset(new GraphCtrlUserCall( *this ));
    maUpdateIdle.SetPriority( TaskPriority::LOWEST );
    maUpdateIdle.SetInvokeHandler( LINK( this, GraphCtrl, UpdateHdl ) );
    maUpdateIdle.Start();
}

void GraphCtrl::SetDrawingArea(weld::DrawingArea* pDrawingArea)
{
    weld::CustomWidgetController::SetDrawingArea(pDrawingArea);
    EnableRTL(false);
}

GraphCtrl::~GraphCtrl()
{
    maUpdateIdle.Stop();

#if !ENABLE_WASM_STRIP_ACCESSIBILITY
    if( mpAccContext.is() )
    {
        mpAccContext->disposing();
        mpAccContext.clear();
    }
#endif

    mpView.reset();
    mpModel.reset();
    mpUserCall.reset();
}

void GraphCtrl::SetSdrMode(bool bSdrMode)
{
    mbSdrMode = bSdrMode;

    const StyleSettings& rStyleSettings = Application::GetSettings().GetStyleSettings();
    OutputDevice& rDevice = GetDrawingArea()->get_ref_device();
    rDevice.SetBackground( Wallpaper( rStyleSettings.GetWindowColor() ) );
    mxVD->SetBackground( Wallpaper( rStyleSettings.GetWindowColor() ) );
    rDevice.SetMapMode( maMap100 );
    mxVD->SetMapMode( maMap100 );

    mpView.reset();
    mpModel.reset();

    if ( mbSdrMode )
        InitSdrModel();

    QueueIdleUpdate();
}

void GraphCtrl::InitSdrModel()
{
    SolarMutexGuard aGuard;

    rtl::Reference<SdrPage> pPage;

    // destroy old junk
    mpView.reset();
    mpModel.reset();

    // Creating a Model
    mpModel.reset(new SdrModel(nullptr, nullptr, true));
    mpModel->SetScaleUnit(maMap100.GetMapUnit());
    mpModel->SetDefaultFontHeight( 500 );

    pPage = new SdrPage( *mpModel );

    pPage->SetSize( maGraphSize );
    pPage->SetBorder( 0, 0, 0, 0 );
    mpModel->InsertPage( pPage.get() );
    mpModel->SetChanged( false );

    // Creating a View
    mpView.reset(new GraphCtrlView(*mpModel, this));
    mpView->SetWorkArea( tools::Rectangle( Point(), maGraphSize ) );
    mpView->EnableExtendedMouseEventDispatcher( true );
    mpView->ShowSdrPage(mpView->GetModel().GetPage(0));
    mpView->SetFrameDragSingles();
    mpView->SetMarkedPointsSmooth( SdrPathSmoothKind::Symmetric );
    mpView->SetEditMode();

    // #i72889# set needed flags
    mpView->SetPageDecorationAllowed(false);
    mpView->SetMasterPageVisualizationAllowed(false);
    mpView->SetBufferedOutputAllowed(true);
    mpView->SetBufferedOverlayAllowed(true);

#if !ENABLE_WASM_STRIP_ACCESSIBILITY
    // Tell the accessibility object about the changes.
    if (mpAccContext.is())
        mpAccContext->setModelAndView (mpModel.get(), mpView.get());
#endif
}

void GraphCtrl::SetGraphic( const Graphic& rGraphic, bool bNewModel )
{
    maGraphic = rGraphic;
    mxVD->SetOutputSizePixel(Size(0, 0)); //force redraw

    if ( maGraphic.GetPrefMapMode().GetMapUnit() == MapUnit::MapPixel )
        maGraphSize = Application::GetDefaultDevice()->PixelToLogic( maGraphic.GetPrefSize(), maMap100 );
    else
        maGraphSize = OutputDevice::LogicToLogic( maGraphic.GetPrefSize(), maGraphic.GetPrefMapMode(), maMap100 );

    if ( mbSdrMode && bNewModel )
        InitSdrModel();

    maGraphSizeLink.Call( this );

    Resize();

    Invalidate();
    QueueIdleUpdate();
}

void GraphCtrl::GraphicToVD()
{
    OutputDevice& rDevice = GetDrawingArea()->get_ref_device();
    mxVD->SetOutputSizePixel(GetOutputSizePixel());
    mxVD->SetBackground(rDevice.GetBackground());
    mxVD->Erase();
    const bool bGraphicValid(GraphicType::NONE != maGraphic.GetType());
    if (bGraphicValid)
        maGraphic.Draw(*mxVD, Point(), maGraphSize);
}

void GraphCtrl::Resize()
{
    weld::CustomWidgetController::Resize();

    if (maGraphSize.Width() && maGraphSize.Height())
    {
        MapMode         aDisplayMap( maMap100 );
        Point           aNewPos;
        Size            aNewSize;
        OutputDevice& rDevice = GetDrawingArea()->get_ref_device();
        const Size      aWinSize = rDevice.PixelToLogic( GetOutputSizePixel(), aDisplayMap );
        const tools::Long      nWidth = aWinSize.Width();
        const tools::Long      nHeight = aWinSize.Height();
        double          fGrfWH = static_cast<double>(maGraphSize.Width()) / maGraphSize.Height();
        double          fWinWH = static_cast<double>(nWidth) / nHeight;

        // Adapt Bitmap to Thumb size
        if ( fGrfWH < fWinWH)
        {
            aNewSize.setWidth( static_cast<tools::Long>( static_cast<double>(nHeight) * fGrfWH ) );
            aNewSize.setHeight( nHeight );
        }
        else
        {
            aNewSize.setWidth( nWidth );
            aNewSize.setHeight( static_cast<tools::Long>( static_cast<double>(nWidth) / fGrfWH ) );
        }

        aNewPos.setX( ( nWidth - aNewSize.Width() )  >> 1 );
        aNewPos.setY( ( nHeight - aNewSize.Height() ) >> 1 );

        // Implementing MapMode for Engine
        aDisplayMap.SetScaleX( double(aNewSize.Width()) / maGraphSize.Width() );
        aDisplayMap.SetScaleY( double(aNewSize.Height()) / maGraphSize.Height() );

        aDisplayMap.SetOrigin( OutputDevice::LogicToLogic( aNewPos, maMap100, aDisplayMap ) );
        rDevice.SetMapMode( aDisplayMap );
        mxVD->SetMapMode( aDisplayMap );
    }

    Invalidate();
}

void GraphCtrl::Paint(vcl::RenderContext& rRenderContext, const tools::Rectangle& rRect)
{
    // #i72889# used split repaint to be able to paint an own background
    // even to the buffered view
    const bool bGraphicValid(GraphicType::NONE != maGraphic.GetType());

    if (GetOutputSizePixel() != mxVD->GetOutputSizePixel())
        GraphicToVD();

    if (mbSdrMode)
    {
        SdrPaintWindow* pPaintWindow = mpView->BeginCompleteRedraw(&rRenderContext);
        pPaintWindow->SetOutputToWindow(true);

        if (bGraphicValid)
        {
            vcl::RenderContext& rTarget = pPaintWindow->GetTargetOutputDevice();

            OutputDevice& rDevice = GetDrawingArea()->get_ref_device();
            rTarget.SetBackground(rDevice.GetBackground());
            rTarget.Erase();

            rTarget.DrawOutDev(Point(), mxVD->GetOutputSize(), Point(), mxVD->GetOutputSize(), *mxVD);
        }

        const vcl::Region aRepaintRegion(rRect);
        mpView->DoCompleteRedraw(*pPaintWindow, aRepaintRegion);
        mpView->EndCompleteRedraw(*pPaintWindow, true);
    }
    else
    {
        // #i73381# in non-SdrMode, paint to local directly
        rRenderContext.DrawOutDev(rRect.TopLeft(), rRect.GetSize(),
                                  rRect.TopLeft(), rRect.GetSize(),
                                  *mxVD);
    }
}

void GraphCtrl::SdrObjChanged( const SdrObject&  )
{
    QueueIdleUpdate();
}

void GraphCtrl::SdrObjCreated( const SdrObject& )
{
    QueueIdleUpdate();
}

void GraphCtrl::MarkListHasChanged()
{
    QueueIdleUpdate();
}

bool GraphCtrl::KeyInput( const KeyEvent& rKEvt )
{
    vcl::KeyCode aCode( rKEvt.GetKeyCode() );
    bool    bProc = false;

    OutputDevice& rDevice = GetDrawingArea()->get_ref_device();

    switch ( aCode.GetCode() )
    {
        case KEY_DELETE:
        case KEY_BACKSPACE:
        {
            if ( mbSdrMode )
            {
                mpView->DeleteMarked();
                bProc = true;
            }
        }
        break;

        case KEY_ESCAPE:
        {
            if ( mbSdrMode )
            {
                const SdrMarkList& rMarkList = mpView->GetMarkedObjectList();
                if ( mpView->IsAction() )
                {
                    mpView->BrkAction();
                    bProc = true;
                }
                else if ( rMarkList.GetMarkCount() != 0 )
                {
                    mpView->UnmarkAllObj();
                    bProc = true;
                }
            }
        }
        break;

        case KEY_F11:
        case KEY_TAB:
        {
            if( mbSdrMode )
            {
                if( !aCode.IsMod1() && !aCode.IsMod2() )
                {
                    bool bForward = !aCode.IsShift();
                    // select next object
                    if ( ! mpView->MarkNextObj( bForward ))
                    {
                        // At first or last object.  Cycle to the other end
                        // of the list.
                        mpView->UnmarkAllObj();
                        mpView->MarkNextObj (bForward);
                    }
                    bProc = true;
                }
                else if(aCode.IsMod1())
                {
                    // select next handle
                    const SdrHdlList& rHdlList = mpView->GetHdlList();
                    bool bForward(!aCode.IsShift());

                    const_cast<SdrHdlList&>(rHdlList).TravelFocusHdl(bForward);

                    bProc = true;
                }
            }
        }
        break;

        case KEY_END:
        {

            if ( aCode.IsMod1() )
            {
                // mark last object
                mpView->UnmarkAllObj();
                mpView->MarkNextObj();

                bProc = true;
            }
        }
        break;

        case KEY_HOME:
        {
            if ( aCode.IsMod1() )
            {
                mpView->UnmarkAllObj();
                mpView->MarkNextObj(true);

                bProc = true;
            }
        }
        break;

        case KEY_UP:
        case KEY_DOWN:
        case KEY_LEFT:
        case KEY_RIGHT:
        {
            tools::Long nX = 0;
            tools::Long nY = 0;

            if (aCode.GetCode() == KEY_UP)
            {
                // Scroll up
                nX = 0;
                nY =-1;
            }
            else if (aCode.GetCode() == KEY_DOWN)
            {
                // Scroll down
                nX = 0;
                nY = 1;
            }
            else if (aCode.GetCode() == KEY_LEFT)
            {
                // Scroll left
                nX =-1;
                nY = 0;
            }
            else if (aCode.GetCode() == KEY_RIGHT)
            {
                // Scroll right
                nX = 1;
                nY = 0;
            }

            const SdrMarkList& rMarkList = mpView->GetMarkedObjectList();
            if (rMarkList.GetMarkCount() != 0 && !aCode.IsMod1() )
            {
                if(aCode.IsMod2())
                {
                    // move in 1 pixel distance
                    Size aLogicSizeOnePixel = rDevice.PixelToLogic(Size(1,1));
                    nX *= aLogicSizeOnePixel.Width();
                    nY *= aLogicSizeOnePixel.Height();
                }
                else
                {
                    // old, fixed move distance
                    nX *= 100;
                    nY *= 100;
                }

                // II
                const SdrHdlList& rHdlList = mpView->GetHdlList();
                SdrHdl* pHdl = rHdlList.GetFocusHdl();

                if(nullptr == pHdl)
                {
                    // restrict movement to WorkArea
                    const tools::Rectangle& rWorkArea = mpView->GetWorkArea();

                    if(!rWorkArea.IsEmpty())
                    {
                        tools::Rectangle aMarkRect(mpView->GetMarkedObjRect());
                        aMarkRect.Move(nX, nY);

                        if(!aMarkRect.Contains(rWorkArea))
                        {
                            if(aMarkRect.Left() < rWorkArea.Left())
                            {
                                nX += rWorkArea.Left() - aMarkRect.Left();
                            }

                            if(aMarkRect.Right() > rWorkArea.Right())
                            {
                                nX -= aMarkRect.Right() - rWorkArea.Right();
                            }

                            if(aMarkRect.Top() < rWorkArea.Top())
                            {
                                nY += rWorkArea.Top() - aMarkRect.Top();
                            }

                            if(aMarkRect.Bottom() > rWorkArea.Bottom())
                            {
                                nY -= aMarkRect.Bottom() - rWorkArea.Bottom();
                            }
                        }
                    }

                    // no handle selected
                    if(0 != nX || 0 != nY)
                    {
                        mpView->MoveAllMarked(Size(nX, nY));
                    }
                }
                else
                {
                    // move handle with index nHandleIndex
                    if (nX || nY)
                    {
                        // now move the Handle (nX, nY)
                        Point aStartPoint(pHdl->GetPos());
                        Point aEndPoint(pHdl->GetPos() + Point(nX, nY));
                        const SdrDragStat& rDragStat = mpView->GetDragStat();

                        // start dragging
                        mpView->BegDragObj(aStartPoint, nullptr, pHdl, 0);

                        if(mpView->IsDragObj())
                        {
                            bool bWasNoSnap = rDragStat.IsNoSnap();
                            bool bWasSnapEnabled = mpView->IsSnapEnabled();

                            // switch snapping off
                            if(!bWasNoSnap)
                                const_cast<SdrDragStat&>(rDragStat).SetNoSnap();
                            if(bWasSnapEnabled)
                                mpView->SetSnapEnabled(false);

                            mpView->MovAction(aEndPoint);
                            mpView->EndDragObj();

                            // restore snap
                            if(!bWasNoSnap)
                                const_cast<SdrDragStat&>(rDragStat).SetNoSnap(bWasNoSnap);
                            if(bWasSnapEnabled)
                                mpView->SetSnapEnabled(bWasSnapEnabled);
                        }
                    }
                }

                bProc = true;
            }
        }
        break;

        case KEY_SPACE:
        {
            const SdrHdlList& rHdlList = mpView->GetHdlList();
            SdrHdl* pHdl = rHdlList.GetFocusHdl();

            if(pHdl)
            {
                if(pHdl->GetKind() == SdrHdlKind::Poly)
                {
                    // rescue ID of point with focus
                    sal_uInt32 nPol(pHdl->GetPolyNum());
                    sal_uInt32 nPnt(pHdl->GetPointNum());

                    if(mpView->IsPointMarked(*pHdl))
                    {
                        if(rKEvt.GetKeyCode().IsShift())
                        {
                            mpView->UnmarkPoint(*pHdl);
                        }
                    }
                    else
                    {
                        if(!rKEvt.GetKeyCode().IsShift())
                        {
                            mpView->UnmarkAllPoints();
                        }

                        mpView->MarkPoint(*pHdl);
                    }

                    if(nullptr == rHdlList.GetFocusHdl())
                    {
                        // restore point with focus
                        SdrHdl* pNewOne = nullptr;

                        for(size_t a = 0; !pNewOne && a < rHdlList.GetHdlCount(); ++a)
                        {
                            SdrHdl* pAct = rHdlList.GetHdl(a);

                            if(pAct
                                && pAct->GetKind() == SdrHdlKind::Poly
                                && pAct->GetPolyNum() == nPol
                                && pAct->GetPointNum() == nPnt)
                            {
                                pNewOne = pAct;
                            }
                        }

                        if(pNewOne)
                        {
                            const_cast<SdrHdlList&>(rHdlList).SetFocusHdl(pNewOne);
                        }
                    }

                    bProc = true;
                }
            }
        }
        break;

        default:
        break;
    }

    if (bProc)
        ReleaseMouse();

    QueueIdleUpdate();

    return bProc;
}

bool GraphCtrl::MouseButtonDown( const MouseEvent& rMEvt )
{
    if ( mbSdrMode && ( rMEvt.GetClicks() < 2 ) )
    {
        OutputDevice& rDevice = GetDrawingArea()->get_ref_device();

        const Point aLogPt( rDevice.PixelToLogic( rMEvt.GetPosPixel() ) );

        if ( !tools::Rectangle( Point(), maGraphSize ).Contains( aLogPt ) && !mpView->IsEditMode() )
            weld::CustomWidgetController::MouseButtonDown( rMEvt );
        else
        {
            // Get Focus for key inputs
            GrabFocus();

            if ( mnPolyEdit )
            {
                SdrViewEvent    aVEvt;
                SdrHitKind      eHit = mpView->PickAnything( rMEvt, SdrMouseEventKind::BUTTONDOWN, aVEvt );

                if ( mnPolyEdit == SID_BEZIER_INSERT && eHit == SdrHitKind::MarkedObject )
                    mpView->BegInsObjPoint( aLogPt, rMEvt.IsMod1());
                else
                    mpView->MouseButtonDown( rMEvt, &rDevice );
            }
            else
                mpView->MouseButtonDown( rMEvt, &rDevice );
        }

        SdrObject* pCreateObj = mpView->GetCreateObj();

        // We want to realize the insert
        if ( pCreateObj && !pCreateObj->GetUserCall() )
            pCreateObj->SetUserCall( mpUserCall.get() );

        SetPointer( mpView->GetPreferredPointer( aLogPt, &rDevice ) );
    }
    else
        weld::CustomWidgetController::MouseButtonDown( rMEvt );

    QueueIdleUpdate();

    return false;
}

bool GraphCtrl::MouseMove(const MouseEvent& rMEvt)
{
    OutputDevice& rDevice = GetDrawingArea()->get_ref_device();
    const Point aLogPos( rDevice.PixelToLogic( rMEvt.GetPosPixel() ) );

    if ( mbSdrMode )
    {
        mpView->MouseMove( rMEvt, &rDevice );

        if( ( SID_BEZIER_INSERT == mnPolyEdit ) &&
            !mpView->PickHandle( aLogPos ) &&
            !mpView->IsInsObjPoint() )
        {
            SetPointer( PointerStyle::Cross );
        }
        else
            SetPointer( mpView->GetPreferredPointer( aLogPos, &rDevice ) );
    }
    else
        weld::CustomWidgetController::MouseButtonUp( rMEvt );

    if ( maMousePosLink.IsSet() )
    {
        if ( tools::Rectangle( Point(), maGraphSize ).Contains( aLogPos ) )
            maMousePos = aLogPos;
        else
            maMousePos = Point();

        maMousePosLink.Call( this );
    }

    QueueIdleUpdate();

    return false;
}

bool GraphCtrl::MouseButtonUp(const MouseEvent& rMEvt)
{
    if ( mbSdrMode )
    {
        OutputDevice& rDevice = GetDrawingArea()->get_ref_device();

        if ( mpView->IsInsObjPoint() )
            mpView->EndInsObjPoint( SdrCreateCmd::ForceEnd );
        else
            mpView->MouseButtonUp( rMEvt, &rDevice );

        ReleaseMouse();
        SetPointer( mpView->GetPreferredPointer( rDevice.PixelToLogic( rMEvt.GetPosPixel() ), &rDevice ) );
    }
    else
        weld::CustomWidgetController::MouseButtonUp( rMEvt );

    QueueIdleUpdate();

    return false;
}

SdrObject* GraphCtrl::GetSelectedSdrObject() const
{
    SdrObject* pSdrObj = nullptr;

    if ( mbSdrMode )
    {
        const SdrMarkList&  rMarkList = mpView->GetMarkedObjectList();

        if ( rMarkList.GetMarkCount() == 1 )
            pSdrObj = rMarkList.GetMark( 0 )->GetMarkedSdrObj();
    }

    return pSdrObj;
}

void GraphCtrl::SetEditMode( const bool _bEditMode )
{
    if ( mbSdrMode )
    {
        mbEditMode = _bEditMode;
        mpView->SetEditMode( mbEditMode );
        meObjKind = SdrObjKind::NONE;
        mpView->SetCurrentObj(meObjKind);
    }
    else
        mbEditMode = false;

    QueueIdleUpdate();
}

void GraphCtrl::SetPolyEditMode( const sal_uInt16 _nPolyEdit )
{
    if ( mbSdrMode && ( _nPolyEdit != mnPolyEdit ) )
    {
        mnPolyEdit = _nPolyEdit;
        mpView->SetFrameDragSingles( mnPolyEdit == 0 );
    }
    else
        mnPolyEdit = 0;

    QueueIdleUpdate();
}

void GraphCtrl::SetObjKind( const SdrObjKind _eObjKind )
{
    if ( mbSdrMode )
    {
        mbEditMode = false;
        mpView->SetEditMode( mbEditMode );
        meObjKind = _eObjKind;
        mpView->SetCurrentObj(meObjKind);
    }
    else
        meObjKind = SdrObjKind::NONE;

    QueueIdleUpdate();
}

IMPL_LINK_NOARG(GraphCtrl, UpdateHdl, Timer *, void)
{
    mbInIdleUpdate = true;
    maUpdateLink.Call( this );
    mbInIdleUpdate = false;
}

void GraphCtrl::QueueIdleUpdate()
{
    if (!mbInIdleUpdate)
        maUpdateIdle.Start();
}

namespace
{
    class WeldOverlayManager final : public sdr::overlay::OverlayManager
    {
        weld::CustomWidgetController& m_rGraphCtrl;

    public:
        WeldOverlayManager(weld::CustomWidgetController& rGraphCtrl, OutputDevice& rDevice)
            : OverlayManager(rDevice)
            , m_rGraphCtrl(rGraphCtrl)
        {
        }

        // invalidate the given range at local OutputDevice
        virtual void invalidateRange(const basegfx::B2DRange& rRange) override
        {
            tools::Rectangle aInvalidateRectangle(RangeToInvalidateRectangle(rRange));
            m_rGraphCtrl.Invalidate(aInvalidateRectangle);
        }
    };
}

rtl::Reference<sdr::overlay::OverlayManager> GraphCtrlView::CreateOverlayManager(OutputDevice& rDevice) const
{
    assert(&rDevice == &m_rGraphCtrl.GetDrawingArea()->get_ref_device());
    if (rDevice.GetOutDevType() == OUTDEV_VIRDEV)
    {
        rtl::Reference<sdr::overlay::OverlayManager> xOverlayManager(new WeldOverlayManager(m_rGraphCtrl, rDevice));
        InitOverlayManager(xOverlayManager);
        return xOverlayManager;
    }
    return SdrView::CreateOverlayManager(rDevice);
}

void GraphCtrlView::InvalidateOneWin(OutputDevice& rDevice)
{
    assert(&rDevice == &m_rGraphCtrl.GetDrawingArea()->get_ref_device());
    if (rDevice.GetOutDevType() == OUTDEV_VIRDEV)
    {
        m_rGraphCtrl.Invalidate();
        return;
    }
    SdrView::InvalidateOneWin(rDevice);
}

void GraphCtrlView::InvalidateOneWin(OutputDevice& rDevice, const tools::Rectangle& rArea)
{
    assert(&rDevice == &m_rGraphCtrl.GetDrawingArea()->get_ref_device());
    if (rDevice.GetOutDevType() == OUTDEV_VIRDEV)
    {
        m_rGraphCtrl.Invalidate(rArea);
        return;
    }
    SdrView::InvalidateOneWin(rDevice, rArea);
}

GraphCtrlView::~GraphCtrlView()
{
    // turn SetOutputToWindow back off again before
    // turning back into our baseclass during dtoring
    const sal_uInt32 nWindowCount(PaintWindowCount());
    for (sal_uInt32 nWinNum(0); nWinNum < nWindowCount; nWinNum++)
    {
        SdrPaintWindow* pPaintWindow = GetPaintWindow(nWinNum);
        pPaintWindow->SetOutputToWindow(false);
    }
}

Point GraphCtrl::GetPositionInDialog() const
{
    int x, y, width, height;
    if (GetDrawingArea()->get_extents_relative_to(*mpDialog, x, y, width, height))
        return Point(x, y);
    return Point();
}

rtl::Reference<comphelper::OAccessible> GraphCtrl::CreateAccessible()
{
#if !ENABLE_WASM_STRIP_ACCESSIBILITY
    if(mpAccContext == nullptr )
    {
        mpAccContext = new SvxGraphCtrlAccessibleContext(*this);
    }
#endif
    return mpAccContext;
}

/* vim:set shiftwidth=4 softtabstop=4 expandtab: */