/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the Collabora Office project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. * * This file incorporates work covered by the following license notice: * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed * with this work for additional information regarding copyright * ownership. The ASF licenses this file to you under the Apache * License, Version 2.0 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.apache.org/licenses/LICENSE-2.0 . */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include // local functions static void lcl_GetMinMax(weld::MetricSpinButton const& rField, sal_Int64& nMin, sal_Int64& nMax) { rField.get_range(nMin, nMax, FieldUnit::TWIP); nMin = rField.denormalize(nMin); nMax = rField.denormalize(nMax); } static void lcl_SetMinMax(weld::MetricSpinButton& rField, sal_Int64 nMin, sal_Int64 nMax) { rField.set_range(rField.normalize(nMin), rField.normalize(nMax), FieldUnit::TWIP); } static bool lcl_IsMetricSystem() { SvtSysLocale aSysLocale; MeasurementSystem eSys = aSysLocale.GetLocaleData().getMeasurementSystemEnum(); return (eSys == MeasurementSystem::Metric); } SvxOptionsGrid::SvxOptionsGrid() : m_nFldDrawX ( 100 ), m_nFldDivisionX ( 0 ), m_nFldDrawY ( 100 ), m_nFldDivisionY ( 0 ), m_bUseGridsnap ( false ), m_bSynchronize ( true ), m_bGridVisible ( false ) { } SvxGridItem* SvxGridItem::Clone( SfxItemPool* ) const { return new SvxGridItem( *this ); } bool SvxGridItem::operator==( const SfxPoolItem& rAttr ) const { assert(SfxPoolItem::operator==(rAttr)); const SvxGridItem& rItem = static_cast(rAttr); return ( m_bUseGridsnap == rItem.m_bUseGridsnap && m_bSynchronize == rItem.m_bSynchronize && m_bGridVisible == rItem.m_bGridVisible && m_nFldDrawX == rItem.m_nFldDrawX && m_nFldDivisionX== rItem.m_nFldDivisionX&& m_nFldDrawY == rItem.m_nFldDrawY && m_nFldDivisionY== rItem.m_nFldDivisionY ); } bool SvxGridItem::GetPresentation ( SfxItemPresentation /*ePres*/, MapUnit /*eCoreUnit*/, MapUnit /*ePresUnit*/, OUString& rText, const IntlWrapper& ) const { rText = u"SvxGridItem"_ustr; return true; } // TabPage Screen Settings SvxGridTabPage::SvxGridTabPage(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rCoreSet) : SfxTabPage(pPage, pController, u"svx/ui/optgridpage.ui"_ustr, u"OptGridPage"_ustr, &rCoreSet) , m_bAttrModified(false) , m_Emode(WRITER_MODE) , m_xCbxUseGridsnap(m_xBuilder->weld_check_button(u"usegridsnap"_ustr)) , m_xCbxUseGridsnapImg(m_xBuilder->weld_widget(u"lockusegridsnap"_ustr)) , m_xCbxGridVisible(m_xBuilder->weld_check_button(u"gridvisible"_ustr)) , m_xCbxGridVisibleImg(m_xBuilder->weld_widget(u"lockgridvisible"_ustr)) , m_xMtrFldDrawX(m_xBuilder->weld_metric_spin_button(u"mtrflddrawx"_ustr, FieldUnit::CM)) , m_xMtrFldDrawXImg(m_xBuilder->weld_widget(u"lockmtrflddrawx"_ustr)) , m_xMtrFldDrawY(m_xBuilder->weld_metric_spin_button(u"mtrflddrawy"_ustr, FieldUnit::CM)) , m_xMtrFldDrawYImg(m_xBuilder->weld_widget(u"lockmtrflddrawy"_ustr)) , m_xNumFldDivisionX(m_xBuilder->weld_spin_button(u"numflddivisionx"_ustr)) , m_xNumFldDivisionXImg(m_xBuilder->weld_widget(u"locknumflddivisionx"_ustr)) , m_xNumFldDivisionY(m_xBuilder->weld_spin_button(u"numflddivisiony"_ustr)) , m_xNumFldDivisionYImg(m_xBuilder->weld_widget(u"locknumflddivisiony"_ustr)) , m_xCbxSynchronize(m_xBuilder->weld_check_button(u"synchronize"_ustr)) , m_xCbxSynchronizeImg(m_xBuilder->weld_widget(u"locksynchronize"_ustr)) , m_xSnapFrames(m_xBuilder->weld_widget(u"snapframes"_ustr)) , m_xCbxSnapHelplines(m_xBuilder->weld_check_button(u"snaphelplines"_ustr)) , m_xCbxSnapHelplinesImg(m_xBuilder->weld_widget(u"locksnaphelplines"_ustr)) , m_xCbxSnapBorder(m_xBuilder->weld_check_button(u"snapborder"_ustr)) , m_xCbxSnapBorderImg(m_xBuilder->weld_widget(u"locksnapborder"_ustr)) , m_xCbxSnapFrame(m_xBuilder->weld_check_button(u"snapframe"_ustr)) , m_xCbxSnapFrameImg(m_xBuilder->weld_widget(u"locksnapframe"_ustr)) , m_xCbxSnapPoints(m_xBuilder->weld_check_button(u"snappoints"_ustr)) , m_xCbxSnapPointsImg(m_xBuilder->weld_widget(u"locksnappoints"_ustr)) , m_xMtrFldSnapArea(m_xBuilder->weld_metric_spin_button(u"mtrfldsnaparea"_ustr, FieldUnit::PIXEL)) , m_xMtrFldSnapAreaImg(m_xBuilder->weld_widget(u"lockmtrfldsnaparea"_ustr)) , m_xCbxOrtho(m_xBuilder->weld_check_button(u"ortho"_ustr)) , m_xCbxOrthoImg(m_xBuilder->weld_widget(u"lockortho"_ustr)) , m_xCbxBigOrtho(m_xBuilder->weld_check_button(u"bigortho"_ustr)) , m_xCbxBigOrthoImg(m_xBuilder->weld_widget(u"lockbigortho"_ustr)) , m_xCbxRotate(m_xBuilder->weld_check_button(u"rotate"_ustr)) , m_xCbxRotateImg(m_xBuilder->weld_widget(u"lockrotate"_ustr)) , m_xMtrFldAngle(m_xBuilder->weld_metric_spin_button(u"mtrfldangle"_ustr, FieldUnit::DEGREE)) , m_xMtrFldBezAngle(m_xBuilder->weld_metric_spin_button(u"mtrfldbezangle"_ustr, FieldUnit::DEGREE)) , m_xMtrFldBezAngleImg(m_xBuilder->weld_widget(u"lockmtrfldbezangle"_ustr)) { // This page requires exchange Support SetExchangeSupport(); // Set Metrics FieldUnit eFUnit = GetModuleFieldUnit( rCoreSet ); sal_Int64 nMin, nMax; lcl_GetMinMax(*m_xMtrFldDrawX, nMin, nMax); SetFieldUnit( *m_xMtrFldDrawX, eFUnit, true ); lcl_SetMinMax(*m_xMtrFldDrawX, nMin, nMax); lcl_GetMinMax(*m_xMtrFldDrawY, nMin, nMax); SetFieldUnit( *m_xMtrFldDrawY, eFUnit, true ); lcl_SetMinMax(*m_xMtrFldDrawY, nMin, nMax); if (const SfxUInt16Item* pItem = rCoreSet.GetItemIfSet(SID_HTML_MODE, false)) { if (0 != (pItem->GetValue() & HTMLMODE_ON)) m_Emode = HTML_MODE; } if (m_Emode != HTML_MODE) { if (SfxViewFrame* pCurrent = SfxViewFrame::Current()) { OUString aModuleName = vcl::CommandInfoProvider::GetModuleIdentifier(pCurrent->GetFrame().GetFrameInterface()); std::u16string_view sModulename = aModuleName.subView(aModuleName.lastIndexOf('.') + 1); if (sModulename.starts_with(u"Text")) m_Emode = WRITER_MODE; else if (sModulename.starts_with(u"Spreadsheet")) m_Emode = CALC_MODE; else if (sModulename.starts_with(u"Presentation")) m_Emode = IMPRESS_MODE; else if (sModulename.starts_with(u"Drawing")) m_Emode = DRAW_MODE; } } m_xCbxRotate->connect_toggled(LINK(this, SvxGridTabPage, ClickRotateHdl_Impl)); Link aLink = LINK(this, SvxGridTabPage, ChangeGridsnapHdl_Impl); m_xCbxUseGridsnap->connect_toggled(aLink); m_xCbxSynchronize->connect_toggled(aLink); m_xCbxGridVisible->connect_toggled(aLink); m_xMtrFldDrawX->connect_value_changed( LINK( this, SvxGridTabPage, ChangeDrawHdl_Impl ) ); m_xMtrFldDrawY->connect_value_changed( LINK( this, SvxGridTabPage, ChangeDrawHdl_Impl ) ); m_xNumFldDivisionX->connect_value_changed( LINK( this, SvxGridTabPage, ChangeDivisionHdl_Impl ) ); m_xNumFldDivisionY->connect_value_changed( LINK( this, SvxGridTabPage, ChangeDivisionHdl_Impl ) ); } SvxGridTabPage::~SvxGridTabPage() { } std::unique_ptr SvxGridTabPage::Create(weld::Container* pPage, weld::DialogController* pController, const SfxItemSet& rAttrSet) { return std::make_unique(pPage, pController, rAttrSet); } OUString SvxGridTabPage::GetAllStrings() { OUStringBuffer sAllStrings; OUString labels[] = { u"label1"_ustr, u"label2"_ustr, u"flddrawx"_ustr, u"flddrawy"_ustr, u"label6"_ustr, u"label7"_ustr, u"label3"_ustr, u"divisionx"_ustr, u"label4"_ustr, u"divisiony"_ustr, u"label5"_ustr, u"label8"_ustr, u"label9"_ustr }; for (const auto& label : labels) { if (const auto pString = m_xBuilder->weld_label(label)) sAllStrings.append(pString->get_label() + " "); } OUString checkButton[] = { u"usegridsnap"_ustr, u"gridvisible"_ustr, u"synchronize"_ustr, u"snaphelplines"_ustr, u"snapborder"_ustr, u"snapframe"_ustr, u"snappoints"_ustr, u"ortho"_ustr, u"bigortho"_ustr, u"rotate"_ustr }; for (const auto& check : checkButton) { if (const auto pString = m_xBuilder->weld_check_button(check)) sAllStrings.append(pString->get_label() + " "); } return sAllStrings.toString().replaceAll("_", ""); } bool SvxGridTabPage::FillItemSet( SfxItemSet* rCoreSet ) { if ( m_bAttrModified ) { SvxGridItem aGridItem( SID_ATTR_GRID_OPTIONS ); aGridItem.m_bUseGridsnap = m_xCbxUseGridsnap->get_active(); aGridItem.m_bSynchronize = m_xCbxSynchronize->get_active(); aGridItem.m_bGridVisible = m_xCbxGridVisible->get_active(); MapUnit eUnit = rCoreSet->GetPool()->GetMetric( SID_ATTR_GRID_OPTIONS ); tools::Long nX = GetCoreValue( *m_xMtrFldDrawX, eUnit ); tools::Long nY = GetCoreValue( *m_xMtrFldDrawY, eUnit ); aGridItem.m_nFldDrawX = static_cast(nX); aGridItem.m_nFldDrawY = static_cast(nY); aGridItem.m_nFldDivisionX = static_cast(m_xNumFldDivisionX->get_value() - 1); aGridItem.m_nFldDivisionY = static_cast(m_xNumFldDivisionY->get_value() - 1); rCoreSet->Put( aGridItem ); } return m_bAttrModified; } void SvxGridTabPage::Reset( const SfxItemSet* rSet ) { const SvxGridItem* pGridAttr = nullptr; if( (pGridAttr = rSet->GetItemIfSet( SID_ATTR_GRID_OPTIONS , false )) ) { bool bReadOnly = false; switch (m_Emode) { case WRITER_MODE: bReadOnly = officecfg::Office::Writer::Grid::Option::SnapToGrid::isReadOnly(); break; case HTML_MODE: bReadOnly = officecfg::Office::WriterWeb::Grid::Option::SnapToGrid::isReadOnly(); break; case IMPRESS_MODE: bReadOnly = officecfg::Office::Impress::Grid::Option::SnapToGrid::isReadOnly(); break; case DRAW_MODE: bReadOnly = officecfg::Office::Draw::Grid::Option::SnapToGrid::isReadOnly(); break; case CALC_MODE: bReadOnly = officecfg::Office::Calc::Grid::Option::SnapToGrid::isReadOnly(); break; default: break; } m_xCbxUseGridsnap->set_active(pGridAttr->m_bUseGridsnap); m_xCbxUseGridsnap->set_sensitive(!bReadOnly); m_xCbxUseGridsnapImg->set_visible(bReadOnly); switch (m_Emode) { case WRITER_MODE: bReadOnly = officecfg::Office::Writer::Grid::Option::Synchronize::isReadOnly(); break; case HTML_MODE: bReadOnly = officecfg::Office::WriterWeb::Grid::Option::Synchronize::isReadOnly(); break; case IMPRESS_MODE: bReadOnly = officecfg::Office::Impress::Grid::Option::Synchronize::isReadOnly(); break; case DRAW_MODE: bReadOnly = officecfg::Office::Draw::Grid::Option::Synchronize::isReadOnly(); break; case CALC_MODE: bReadOnly = officecfg::Office::Calc::Grid::Option::Synchronize::isReadOnly(); break; default: break; } m_xCbxSynchronize->set_active(pGridAttr->m_bSynchronize); m_xCbxSynchronize->set_sensitive(!bReadOnly); m_xCbxSynchronizeImg->set_visible(bReadOnly); switch (m_Emode) { case WRITER_MODE: bReadOnly = officecfg::Office::Writer::Grid::Option::VisibleGrid::isReadOnly(); break; case HTML_MODE: bReadOnly = officecfg::Office::WriterWeb::Grid::Option::VisibleGrid::isReadOnly(); break; case IMPRESS_MODE: bReadOnly = officecfg::Office::Impress::Grid::Option::VisibleGrid::isReadOnly(); break; case DRAW_MODE: bReadOnly = officecfg::Office::Draw::Grid::Option::VisibleGrid::isReadOnly(); break; case CALC_MODE: bReadOnly = officecfg::Office::Calc::Grid::Option::VisibleGrid::isReadOnly(); break; default: break; } m_xCbxGridVisible->set_active(pGridAttr->m_bGridVisible); m_xCbxGridVisible->set_sensitive(!bReadOnly); m_xCbxGridVisibleImg->set_visible(bReadOnly); MapUnit eUnit = rSet->GetPool()->GetMetric( SID_ATTR_GRID_OPTIONS ); SetMetricValue( *m_xMtrFldDrawX , pGridAttr->m_nFldDrawX, eUnit ); SetMetricValue( *m_xMtrFldDrawY , pGridAttr->m_nFldDrawY, eUnit ); switch (m_Emode) { case WRITER_MODE: bReadOnly = officecfg::Office::Writer::Grid::Resolution::XAxis::isReadOnly(); break; case HTML_MODE: bReadOnly = officecfg::Office::WriterWeb::Grid::Resolution::XAxis::isReadOnly(); break; case IMPRESS_MODE: { if (lcl_IsMetricSystem()) bReadOnly = officecfg::Office::Impress::Grid::Resolution::XAxis::Metric::isReadOnly(); else bReadOnly = officecfg::Office::Impress::Grid::Resolution::XAxis::NonMetric::isReadOnly(); } break; case DRAW_MODE: { if (lcl_IsMetricSystem()) bReadOnly = officecfg::Office::Draw::Grid::Resolution::XAxis::Metric::isReadOnly(); else bReadOnly = officecfg::Office::Draw::Grid::Resolution::XAxis::NonMetric::isReadOnly(); } break; case CALC_MODE: { if (lcl_IsMetricSystem()) bReadOnly = officecfg::Office::Calc::Grid::Resolution::XAxis::Metric::isReadOnly(); else bReadOnly = officecfg::Office::Calc::Grid::Resolution::XAxis::NonMetric::isReadOnly(); } break; default: break; } m_xMtrFldDrawX->set_sensitive(!bReadOnly); m_xMtrFldDrawXImg->set_visible(bReadOnly); switch (m_Emode) { case WRITER_MODE: bReadOnly = officecfg::Office::Writer::Grid::Resolution::YAxis::isReadOnly(); break; case HTML_MODE: bReadOnly = officecfg::Office::WriterWeb::Grid::Resolution::YAxis::isReadOnly(); break; case IMPRESS_MODE: { if (lcl_IsMetricSystem()) bReadOnly = officecfg::Office::Impress::Grid::Resolution::YAxis::Metric::isReadOnly(); else bReadOnly = officecfg::Office::Impress::Grid::Resolution::YAxis::NonMetric::isReadOnly(); } break; case DRAW_MODE: { if (lcl_IsMetricSystem()) bReadOnly = officecfg::Office::Draw::Grid::Resolution::YAxis::Metric::isReadOnly(); else bReadOnly = officecfg::Office::Draw::Grid::Resolution::YAxis::NonMetric::isReadOnly(); } break; case CALC_MODE: { if (lcl_IsMetricSystem()) bReadOnly = officecfg::Office::Calc::Grid::Resolution::YAxis::Metric::isReadOnly(); else bReadOnly = officecfg::Office::Calc::Grid::Resolution::YAxis::NonMetric::isReadOnly(); } break; default: break; } m_xMtrFldDrawY->set_sensitive(!bReadOnly); m_xMtrFldDrawYImg->set_visible(bReadOnly); m_xNumFldDivisionX->set_value(pGridAttr->m_nFldDivisionX + 1); m_xNumFldDivisionY->set_value(pGridAttr->m_nFldDivisionY + 1); switch (m_Emode) { case WRITER_MODE: bReadOnly = officecfg::Office::Writer::Grid::Subdivision::XAxis::isReadOnly(); break; case HTML_MODE: bReadOnly = officecfg::Office::WriterWeb::Grid::Subdivision::XAxis::isReadOnly(); break; case IMPRESS_MODE: bReadOnly = officecfg::Office::Impress::Grid::Subdivision::XAxis::isReadOnly(); break; case DRAW_MODE: bReadOnly = officecfg::Office::Draw::Grid::Subdivision::XAxis::isReadOnly(); break; case CALC_MODE: bReadOnly = officecfg::Office::Calc::Grid::Subdivision::XAxis::isReadOnly(); break; default: break; } m_xNumFldDivisionX->set_sensitive(!bReadOnly); m_xNumFldDivisionXImg->set_visible(bReadOnly); switch (m_Emode) { case WRITER_MODE: bReadOnly = officecfg::Office::Writer::Grid::Subdivision::YAxis::isReadOnly(); break; case HTML_MODE: bReadOnly = officecfg::Office::WriterWeb::Grid::Subdivision::YAxis::isReadOnly(); break; case IMPRESS_MODE: bReadOnly = officecfg::Office::Impress::Grid::Subdivision::YAxis::isReadOnly(); break; case DRAW_MODE: bReadOnly = officecfg::Office::Draw::Grid::Subdivision::YAxis::isReadOnly(); break; case CALC_MODE: bReadOnly = officecfg::Office::Calc::Grid::Subdivision::YAxis::isReadOnly(); break; default: break; } m_xNumFldDivisionY->set_sensitive(!bReadOnly); m_xNumFldDivisionYImg->set_visible(bReadOnly); } ChangeGridsnapHdl_Impl(*m_xCbxUseGridsnap); m_bAttrModified = false; } void SvxGridTabPage::ActivatePage( const SfxItemSet& rSet ) { const SvxGridItem* pGridAttr = nullptr; if( (pGridAttr = rSet.GetItemIfSet( SID_ATTR_GRID_OPTIONS , false )) ) { m_xCbxUseGridsnap->set_active(pGridAttr->m_bUseGridsnap); ChangeGridsnapHdl_Impl(*m_xCbxUseGridsnap); } // Metric Change if necessary (as TabPage is in the dialog, where the // metric can be set const SfxUInt16Item* pItem = rSet.GetItemIfSet( SID_ATTR_METRIC , false ); if( !pItem ) return; FieldUnit eFUnit = static_cast(static_cast(pItem->GetValue())); if (eFUnit == m_xMtrFldDrawX->get_unit()) return; // Set Metrics sal_Int64 nMin, nMax; int nVal = m_xMtrFldDrawX->denormalize(m_xMtrFldDrawX->get_value(FieldUnit::TWIP)); lcl_GetMinMax(*m_xMtrFldDrawX, nMin, nMax); SetFieldUnit(*m_xMtrFldDrawX, eFUnit, true); lcl_SetMinMax(*m_xMtrFldDrawX, nMin, nMax); m_xMtrFldDrawX->set_value(m_xMtrFldDrawX->normalize(nVal), FieldUnit::TWIP); nVal = m_xMtrFldDrawY->denormalize(m_xMtrFldDrawY->get_value(FieldUnit::TWIP)); lcl_GetMinMax(*m_xMtrFldDrawY, nMin, nMax); SetFieldUnit(*m_xMtrFldDrawY, eFUnit, true); lcl_SetMinMax(*m_xMtrFldDrawY, nMin, nMax); m_xMtrFldDrawY->set_value(m_xMtrFldDrawY->normalize(nVal), FieldUnit::TWIP); } DeactivateRC SvxGridTabPage::DeactivatePage( SfxItemSet* _pSet ) { if ( _pSet ) FillItemSet( _pSet ); return DeactivateRC::LeavePage; } IMPL_LINK(SvxGridTabPage, ChangeDrawHdl_Impl, weld::MetricSpinButton&, rField, void) { m_bAttrModified = true; if (m_xCbxSynchronize->get_active()) { if (&rField == m_xMtrFldDrawX.get()) m_xMtrFldDrawY->set_value(m_xMtrFldDrawX->get_value(FieldUnit::NONE), FieldUnit::NONE); else m_xMtrFldDrawX->set_value(m_xMtrFldDrawY->get_value(FieldUnit::NONE), FieldUnit::NONE); } } IMPL_LINK_NOARG(SvxGridTabPage, ClickRotateHdl_Impl, weld::Toggleable&, void) { if (m_xCbxRotate->get_active()) { m_xMtrFldAngle->set_sensitive(m_Emode == DRAW_MODE ? !officecfg::Office::Draw::Snap::Position::RotatingValue::isReadOnly() : !officecfg::Office::Impress::Snap::Position::RotatingValue::isReadOnly()); } else m_xMtrFldAngle->set_sensitive(false); } IMPL_LINK(SvxGridTabPage, ChangeDivisionHdl_Impl, weld::SpinButton&, rField, void) { m_bAttrModified = true; if (m_xCbxSynchronize->get_active()) { if (m_xNumFldDivisionX.get() == &rField) m_xNumFldDivisionY->set_value(m_xNumFldDivisionX->get_value()); else m_xNumFldDivisionX->set_value(m_xNumFldDivisionY->get_value()); } } IMPL_LINK_NOARG(SvxGridTabPage, ChangeGridsnapHdl_Impl, weld::Toggleable&, void) { m_bAttrModified = true; } /* vim:set shiftwidth=4 softtabstop=4 expandtab: */