/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the Collabora Office project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace css; using namespace css::uno; class Test : public SwModelTestBase { public: Test() : SwModelTestBase(u"/sw/qa/extras/ooxmlexport/data/"_ustr) {} }; CPPUNIT_TEST_FIXTURE(Test, testTdf150197_predefinedNumbering) { createSwDoc(); // The exact numbering style doesn't matter - just any non-bullet pre-defined numbering style. cpo::uno::Sequence aPropertyValues = comphelper::InitPropertySequence({ { "Style", cpo::uno::Any(u"Numbering 123"_ustr) }, { "FamilyName", cpo::uno::Any(u"NumberingStyles"_ustr) }, }); dispatchCommand(mxComponent, u".uno:StyleApply"_ustr, aPropertyValues); CPPUNIT_ASSERT_EQUAL(u"1."_ustr, getProperty(getParagraph(1), u"ListLabelString"_ustr)); saveAndReload(TestFilter::DOCX); CPPUNIT_ASSERT_EQUAL(u"1."_ustr, getProperty(getParagraph(1), u"ListLabelString"_ustr)); } CPPUNIT_TEST_FIXTURE(Test, testInlineSdtHeader) { // Without the accompanying fix in place, this test would have failed with an assertion failure, // we produced not-well-formed XML on save. createSwDoc("inline-sdt-header.docx"); save(TestFilter::DOCX); } CPPUNIT_TEST_FIXTURE(Test, testCellSdtRedline) { // Without the accompanying fix in place, this test would have failed with an assertion failure, // we produced not-well-formed XML on save. createSwDoc("cell-sdt-redline.docx"); save(TestFilter::DOCX); } CPPUNIT_TEST_FIXTURE(Test, testTdf148956_directEndFormatting) { auto verify = [this](bool bIsExport = false) { SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); // pWrtShell->EndPara(/*bSelect=*/true); dispatchCommand(mxComponent, u".uno:GotoEndOfPara"_ustr, {}); if (!bIsExport) { CPPUNIT_ASSERT_MESSAGE( "Has direct formatting", pWrtShell->GetCursor()->GetPoint()->GetNode().GetTextNode()->GetpSwpHints()); } else { CPPUNIT_ASSERT_MESSAGE( "Direct formatting cleared", !pWrtShell->GetCursor()->GetPoint()->GetNode().GetTextNode()->GetpSwpHints()); } pWrtShell->SttPara(/*bSelect=*/true); dispatchCommand(mxComponent, u".uno:ResetAttributes"_ustr, {}); dispatchCommand(mxComponent, u".uno:GotoEndOfPara"_ustr, {}); CPPUNIT_ASSERT_MESSAGE( "Direct formatting cleared", !pWrtShell->GetCursor()->GetPoint()->GetNode().GetTextNode()->GetpSwpHints()); }; createSwDoc("tdf148956_directEndFormatting.docx"); verify(); saveAndReload(TestFilter::DOCX); verify(/*bIsExport*/ true); } DECLARE_OOXMLEXPORT_TEST(testTdf147646, "tdf147646_mergedCellNumbering.docx") { xmlDocUniquePtr pXmlDoc = parseLayoutDump(); //Without the fix in place, it would have failed with //- Expected: 2. //- Actual : 4. // assertXPath(pXmlDoc, "/root/page/body/tab/row[4]/cell/txt/SwParaPortion/SwLineLayout/child::*[@type='PortionType::Number']","expand",u"2."); } DECLARE_OOXMLEXPORT_TEST(testTdf153526_commentInNumbering, "tdf153526_commentInNumbering.docx") { // an exception was prematurely ending finishParagraph, losing numbering and CRs // so before the patch, this was 6. CPPUNIT_ASSERT_EQUAL(13, getParagraphs()); } CPPUNIT_TEST_FIXTURE(Test, testTdf153042_largeTab) { createSwDoc("tdf153042_largeTab.docx"); // This is not the greatest test because it is slightly weird, and has a different layout // in MS Word 2010/2003 than it does in Word 2019. This tests for the 2019 layout. // Additionally (in Word 2019), going to paragraph properties and hitting OK changes the layout. // It changes back by going to outline numbering properties and hitting OK. // export does not keep the tabstop when exporting non-numbering. (Probably a good thing...) xmlDocUniquePtr pLayout = parseLayoutDump(); // Ensure a large tabstop is used in the pseudo-numbering (numbering::NONE followed by tabstop) assertXPath(pLayout, "//SwFixPortion", "width", u"1701"); } CPPUNIT_TEST_FIXTURE(Test, testTdf153042_noTab) { createSwDoc("tdf153042_noTab.docx"); // This is not the greatest test because it is slightly weird. // It is the same as the "largeTab" file, except the paragraph properties were viewed // and OK'ed, and now it looks like how Word 2010 and 2003 were laying it out. // Amazingly, LO is handling both documents correctly at the moment, so let's unit test that... // export does not keep the tabstop when exporting non-numbering. (Probably a good thing...) xmlDocUniquePtr pLayout = parseLayoutDump(); // Ensure a miniscule tab is used in the pseudo-numbering (numbering::NONE followed by tabstop) assertXPath(pLayout, "//SwFixPortion", "width", u"10"); } DECLARE_OOXMLEXPORT_TEST(testTdf154751_dualStrikethrough, "tdf154751_dualStrikethrough.docx") { auto nStrike = getProperty(getRun(getParagraph(1), 1), u"CharStrikeout"_ustr); CPPUNIT_ASSERT_EQUAL(awt::FontStrikeout::SINGLE, nStrike); } CPPUNIT_TEST_FIXTURE(Test, testTdf154478) { createSwDoc("tdf154478.docx"); save(TestFilter::DOCX); xmlDocUniquePtr pXmlDoc = parseExport(u"word/comments.xml"_ustr); OUString aValues[5] = { u"Comment1 seen."_ustr, u"Comment2 seen."_ustr, u"Comment3 NOTseen."_ustr, u"Comment4 NOTseen."_ustr, u"Comment5 NOTseen."_ustr }; for (size_t i = 1; i < 6; ++i) { OString sPath = "/w:comments/w:comment[" + OString::number(i) + "]/w:p/w:r/w:t"; // Without the fix in place, this test would have failed with // - In <>, XPath '/w:comments/w:comment[3]/w:p/w:r/w:t' not found assertXPathContent(pXmlDoc, sPath, aValues[i - 1]); } } CPPUNIT_TEST_FIXTURE(Test, testTdf153592_columnBreaks) { createSwDoc("tdf153592_columnBreaks.docx"); save(TestFilter::DOCX); xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // The two column breaks were lost on import. (I wouldn't complain if they were at 3,5) assertXPath(pXmlDoc, "//w:br", 2); } DECLARE_OOXMLEXPORT_TEST(testTdf104394_lostTextbox, "tdf104394_lostTextbox.docx") { //FIXME: validation error in OOXML export: Errors: 4 skipValidation(); // This was only one page b/c the textbox was missing. CPPUNIT_ASSERT_EQUAL(2, getPages()); } DECLARE_OOXMLEXPORT_TEST(testTdf164500_framePrBeforeTable, "tdf164500_framePrBeforeTable.docx") { // Should be only one page (but was two because the frame was anchored inside cell A1, // and thus the width was limited by the cell width. It must be anchored before the table. CPPUNIT_ASSERT_EQUAL(1, getPages()); CPPUNIT_ASSERT_EQUAL(1, getShapes()); // one text frame uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY_THROW); uno::Reference xTables(xTablesSupplier->getTextTables(), uno::UNO_QUERY_THROW); CPPUNIT_ASSERT_EQUAL(sal_Int32(3), xTables->getCount()); } DECLARE_OOXMLEXPORT_TEST(testTdf164500_framePrBeforeTable2, "tdf164500_framePrBeforeTable2.docx") { CPPUNIT_ASSERT_EQUAL_MESSAGE("Everything should fit on one page", 1, getPages()); } DECLARE_OOXMLEXPORT_TEST(testTdf146984_anchorInShape, "tdf146984_anchorInShape.docx") { // This was only one page b/c the page break was missing. CPPUNIT_ASSERT_EQUAL(2, getPages()); } DECLARE_OOXMLEXPORT_TEST(testTdf127622_framePr, "tdf127622_framePr.docx") { // All the paragraphs end up with the same frame definition, so put them all in one frame CPPUNIT_ASSERT_EQUAL(1, getShapes()); } DECLARE_OOXMLEXPORT_TEST(testTdf105035_framePrB, "tdf105035_framePrB.docx") { // The paragraphs have different frame definitions, so they must be in separate frames, // and the frames must not overlap - even though their vertical positions are identical. xmlDocUniquePtr pLayout = parseLayoutDump(); sal_Int32 n1stFlyBottom = getXPath(pLayout, "//page[1]//anchored/fly[1]/infos/bounds", "bottom").toInt32(); sal_Int32 n2ndFlyTop = getXPath(pLayout, "//page[1]//anchored/fly[2]/infos/bounds", "top").toInt32(); CPPUNIT_ASSERT_GREATER(n1stFlyBottom, n2ndFlyTop); //Top is greater than bottom // Impossible layout TODO: the textboxes are in the wrong order. OUString sTextBox1(u"Preparation of Papers for IEEE TRANSACTIONS and JOURNALS (November 2012)"_ustr); CPPUNIT_ASSERT_MESSAGE("DID YOU FIX ME? Wow - I didn't think this would be possible!", !getXPathContent(pLayout, "//page[1]//anchored/fly[1]/txt").startsWith(sTextBox1)); } DECLARE_OOXMLEXPORT_TEST(testTdf105035_framePrC, "tdf105035_framePrC.docx") { // The paragraphs have different frame definitions, so they must be in separate frames, // and the frames DO overlap this time. xmlDocUniquePtr pLayout = parseLayoutDump(); sal_Int32 n1stFlyTop = getXPath(pLayout, "//page[1]//anchored/fly[1]/infos/bounds", "top").toInt32(); sal_Int32 n2ndFlyTop = getXPath(pLayout, "//page[1]//anchored/fly[2]/infos/bounds", "top").toInt32(); CPPUNIT_ASSERT_EQUAL(n1stFlyTop, n2ndFlyTop); //both frames start at the same position } DECLARE_OOXMLEXPORT_TEST(testTdf154129_framePr1, "tdf154129_framePr1.docx") { for (size_t i = 1; i < 4; ++i) { uno::Reference xTextFrame = getShape(i); // The anchor is defined in the style, and only the first style was checked, not the parents auto nAnchor = getProperty(xTextFrame, u"HoriOrientRelation"_ustr); CPPUNIT_ASSERT_EQUAL(text::RelOrientation::PAGE_FRAME, nAnchor); nAnchor = getProperty(xTextFrame, u"VertOrientRelation"_ustr); CPPUNIT_ASSERT_EQUAL(text::RelOrientation::PAGE_FRAME, nAnchor); } } DECLARE_OOXMLEXPORT_TEST(testTdf154703_framePr, "tdf154703_framePr.docx") { // the frame conversion had been failing, so it imported as plain text only. CPPUNIT_ASSERT_EQUAL(1, getShapes()); } CPPUNIT_TEST_FIXTURE(Test, testTdf154703_framePr2) { auto verify = [this](bool bIsExport = false) { // framePr frames are always imported as fully transparent CPPUNIT_ASSERT_EQUAL(sal_Int16(100), getProperty(getShape(1), u"FillTransparence"_ustr)); // as opposed to testLibreOfficeHang (RTF != INVERT_BORDER_SPACING) do not duplicate left/right uno::Reference xTextRange(getShape(1), uno::UNO_QUERY); uno::Reference xText = xTextRange->getText(); CPPUNIT_ASSERT_EQUAL(u"framePr"_ustr, getParagraphOfText(1, xText)->getString()); sal_Int32 nFrame = getProperty(getShape(1), u"LeftBorderDistance"_ustr); sal_Int32 nPara = getProperty(getParagraphOfText(1, xText), u"LeftBorderDistance"_ustr); if (!bIsExport) // RTF CPPUNIT_ASSERT_EQUAL(sal_Int32(529), nFrame + nPara); else // DOCX CPPUNIT_ASSERT_EQUAL(sal_Int32(529*2), nFrame + nPara); if (!bIsExport) { // Fill the frame with a red background. It should be transferred on export to the paragraph uno::Reference xFrame(getShape(1), uno::UNO_QUERY); xFrame->setPropertyValue(u"FillColor"_ustr, cpo::uno::Any(COL_RED)); xFrame->setPropertyValue(u"FillTransparence"_ustr, cpo::uno::Any(static_cast(0))); } }; createSwDoc("tdf154703_framePr2.rtf"); verify(); //FIXME: validation error in OOXML export: Errors: 1 skipValidation(); saveAndReload(TestFilter::DOCX); verify(/*bIsExport*/ true); // exported: framed paragraphs without a background should now have a red background xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); assertXPath(pXmlDoc, "//w:body/w:p[1]/w:pPr/w:shd", "fill", u"800000"); assertXPath(pXmlDoc, "//w:body/w:p[2]/w:pPr/w:shd", "fill", u"548DD4"); // was blue already, no change assertXPath(pXmlDoc, "//w:body/w:p[3]/w:pPr/w:shd", "fill", u"800000"); assertXPath(pXmlDoc, "//w:body/w:p[3]/w:pPr/w:framePr", "yAlign", u"center"); assertXPathNoAttribute(pXmlDoc, "//w:body/w:p[3]/w:pPr/w:framePr", "y"); } CPPUNIT_TEST_FIXTURE(Test, testTdf154703_framePrWrapSpacing) { createSwDoc("tdf154703_framePrWrapSpacing.docx"); save(TestFilter::DOCX); CPPUNIT_ASSERT_EQUAL(2, getPages()); xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // before the fix, this was half of the correct value. assertXPath(pXmlDoc, "//w:body/w:p/w:pPr/w:framePr", "hSpace", u"2552"); } CPPUNIT_TEST_FIXTURE(Test, testTdf154703_framePrTextDirection) { createSwDoc("tdf154703_framePrTextDirection.docx"); CPPUNIT_ASSERT_EQUAL(sal_Int16(text::WritingMode2::TB_RL), getProperty(getShape(1), u"WritingMode"_ustr)); saveAndReload(TestFilter::DOCX); CPPUNIT_ASSERT_EQUAL(sal_Int16(text::WritingMode2::TB_RL), getProperty(getShape(1), u"WritingMode"_ustr)); xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); assertXPath(pXmlDoc, "//w:body/w:p/w:pPr/w:textDirection", "val", u"tbRl"); } DECLARE_OOXMLEXPORT_TEST(testTdf153613_anchoredAfterPgBreak, "tdf153613_anchoredAfterPgBreak.docx") { xmlDocUniquePtr pLayout = parseLayoutDump(); // An anchored TO character image anchors before the page break. assertXPath(pLayout, "//page[1]//anchored", 1); } DECLARE_OOXMLEXPORT_TEST(testTdf153613_anchoredAfterPgBreak2, "tdf153613_anchoredAfterPgBreak2.docx") { xmlDocUniquePtr pLayout = parseLayoutDump(); // An anchored TO character image, followed by more characters moves to the following page assertXPath(pLayout, "//page[2]//anchored", 1); } DECLARE_OOXMLEXPORT_TEST(testTdf153613_anchoredAfterPgBreak3, "tdf153613_anchoredAfterPgBreak3.docx") { xmlDocUniquePtr pLayout = parseLayoutDump(); // An anchored TO character image, with setting splitPgBreakAndParaMark moves to the following page assertXPath(pLayout, "//page[2]//anchored", 1); } DECLARE_OOXMLEXPORT_TEST(testTdf153613_anchoredAfterPgBreak6, "tdf153613_anchoredAfterPgBreak6.docx") { // An anchored TO character image, followed by more characters moves to the following page // The difference from test 2 is that it is not the first character run CPPUNIT_ASSERT_EQUAL(2, getPages()); CPPUNIT_ASSERT_EQUAL(4, getParagraphs()); xmlDocUniquePtr pLayout = parseLayoutDump(); CPPUNIT_ASSERT_EQUAL(u"y"_ustr, getXPathContent(pLayout, "//page[2]/body/txt[1]")); assertXPath(pLayout, "//page[1]//anchored", 1); // DID YOU FIX ME? This should be page[2] } DECLARE_OOXMLEXPORT_TEST(testTdf153613_inlineAfterPgBreak, "tdf153613_inlineAfterPgBreak.docx") { xmlDocUniquePtr pLayout = parseLayoutDump(); // An inline AS character image moves to the following page when after the page break. assertXPath(pLayout, "//page[2]//anchored", 1); } DECLARE_OOXMLEXPORT_TEST(testTdf153613_inlineAfterPgBreak2, "tdf153613_inlineAfterPgBreak2.docx") { // An inline AS character image moves to the following page when after the page break. // The difference from the previous test is that it is not the first character run CPPUNIT_ASSERT_EQUAL(2, getPages()); CPPUNIT_ASSERT_EQUAL(4, getParagraphs()); xmlDocUniquePtr pLayout = parseLayoutDump(); assertXPathContent(pLayout, "//page[1]/body/txt[2]", u"x"); assertXPath(pLayout, "//page[2]//anchored", 1); } DECLARE_OOXMLEXPORT_TEST(testTdf153613_sdtAfterPgBreak, "tdf153613_sdtAfterPgBreak.docx") { CPPUNIT_ASSERT_EQUAL(2, getPages()); } DECLARE_OOXMLEXPORT_TEST(testTdf153613_textboxAfterPgBreak3, "tdf153613_textboxAfterPgBreak3.docx") { // both textboxes on the second (last) page CPPUNIT_ASSERT_EQUAL(2, getPages()); xmlDocUniquePtr pLayout = parseLayoutDump(); assertXPath(pLayout, "//page[2]/body/txt/anchored/fly", 2); } DECLARE_OOXMLEXPORT_TEST(testTdf153964_topMarginAfterBreak14, "tdf153964_topMarginAfterBreak14.docx") { //The top margin should only apply once in a split paragraph. //In this compat14 (Windows 2010) version, it applies after the break if no prior visible run. uno::Reference xPara(getParagraph(2, u"a w:br at the start of the document. Does it use 60 point top margin?"_ustr), uno::UNO_QUERY); //CPPUNIT_ASSERT_EQUAL(sal_Int32(2117), getProperty(xPara, "ParaTopMargin")); xPara.set(getParagraph(3, u"60 pt spacing before"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2117), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xfbe4d5), getProperty(xPara, u"ParaBackColor"_ustr)); // The top margin was applied to paragraph 3, so it shouldn't apply here xPara.set(getParagraph(4, u"column break1"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xfbe4d5), getProperty(xPara, u"ParaBackColor"_ustr)); xPara.set(getParagraph(5, u"60 pt followed by page break"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2117), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xdeeaf6), getProperty(xPara, u"ParaBackColor"_ustr)); // The top margin was applied to paragraph 5, so it shouldn't apply here xPara.set(getParagraph(6, u"page break1"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xdeeaf6), getProperty(xPara, u"ParaBackColor"_ustr)); // The top margin was not applied yet, so with compat14 it should apply here. xPara.set(getParagraph(7, u"column break2"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2117), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xe2efd9), getProperty(xPara, u"ParaBackColor"_ustr)); // In an odd twist, the w:br was actually at the end of the previous w:p, so in that case // we ignore the top margin definition this time. xPara.set(getParagraph(9, u"page break2"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaTopMargin"_ustr)); // The top margin was not applied before the column break, so with compat14 it should apply here xPara.set(getParagraph(10, u""_ustr), uno::UNO_QUERY); // after column break CPPUNIT_ASSERT_EQUAL(sal_Int32(2117), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xfff2cc), getProperty(xPara, u"ParaBackColor"_ustr)); // In an odd twist, the w:br was actually at the end of the previous w:p, so in that case // we ignore the top margin definition this time. xPara.set(getParagraph(12, u""_ustr), uno::UNO_QUERY); // after page break CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaTopMargin"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTdf153964_topMarginAfterBreak15, "tdf153964_topMarginAfterBreak15.docx") { //The top margin should only apply once (at most) in a split paragraph. //In this compat15 (Windows 2013) version, it never applies after the break. uno::Reference xPara(getParagraph(2, u"a w:br at the start of the document. Does it use 60 point top margin?"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaTopMargin"_ustr)); xPara.set(getParagraph(3, u"60 pt spacing before"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2117), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xfbe4d5), getProperty(xPara, u"ParaBackColor"_ustr)); // The top margin was applied to paragraph 3, so it shouldn't apply here xPara.set(getParagraph(4, u"column break1"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xfbe4d5), getProperty(xPara, u"ParaBackColor"_ustr)); xPara.set(getParagraph(5, u"60 pt followed by page break"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2117), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xdeeaf6), getProperty(xPara, u"ParaBackColor"_ustr)); // The top margin was applied to paragraph 5, so it shouldn't apply here xPara.set(getParagraph(6, u"page break1"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xdeeaf6), getProperty(xPara, u"ParaBackColor"_ustr)); // The top margin was not applied to paragraph 6, and with compat15 it shouldn't apply here. xPara.set(getParagraph(7, u"column break2"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xe2efd9), getProperty(xPara, u"ParaBackColor"_ustr)); // The top margin not was applied to paragraph 8, and with compat15 it shouldn't apply here. xPara.set(getParagraph(9, u"page break2"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaTopMargin"_ustr)); // The top margin was not applied to paragraph 9, and with compat15 it shouldn't apply here. xPara.set(getParagraph(10, u""_ustr), uno::UNO_QUERY); // after column break CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaTopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(Color(0xfff2cc), getProperty(xPara, u"ParaBackColor"_ustr)); // The top margin was not applied to paragraph 11, and with compat15 it shouldn't apply here. xPara.set(getParagraph(12, u""_ustr), uno::UNO_QUERY); // after page break CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaTopMargin"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTdf153964_numberingAfterBreak14, "tdf153964_numberingAfterBreak14.docx") { //Numbering should only apply once in a split paragraph. uno::Reference xPara(getParagraph(2, u"How numbering affected by a column break?"_ustr), uno::UNO_QUERY); //CPPUNIT_ASSERT_EQUAL(OUString("1."), getProperty(xPara, "ListLabelString")); xPara.set(getParagraph(3, u"How is numbering affected by a page break?"_ustr), uno::UNO_QUERY); //CPPUNIT_ASSERT_EQUAL(OUString("2."), getProperty(xPara, "ListLabelString")); xPara.set(getParagraph(4, u"x"_ustr), uno::UNO_QUERY); //CPPUNIT_ASSERT_EQUAL(OUString("3."), getProperty(xPara, "ListLabelString")); xPara.set(getParagraph(5, u"column break"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(u""_ustr, getProperty(xPara, u"ListLabelString"_ustr)); xPara.set(getParagraph(6, u"y"_ustr), uno::UNO_QUERY); //CPPUNIT_ASSERT_EQUAL(OUString("3."), getProperty(xPara, "ListLabelString")); xPara.set(getParagraph(7, u"page break"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(u""_ustr, getProperty(xPara, u"ListLabelString"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTdf153964_firstIndentAfterBreak14, "tdf153964_firstIndentAfterBreak14.docx") { //First line indents should only apply once in a split paragraph. uno::Reference xPara(getParagraph(2, u"How is first line indent affected by a column break?"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2000), getProperty(xPara, u"ParaFirstLineIndent"_ustr)); xPara.set(getParagraph(3, u"How is first line indent affected by a page break?"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2000), getProperty(xPara, u"ParaFirstLineIndent"_ustr)); xPara.set(getParagraph(4, u"x"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2000), getProperty(xPara, u"ParaFirstLineIndent"_ustr)); xPara.set(getParagraph(5, u"column break"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaFirstLineIndent"_ustr)); xPara.set(getParagraph(6, u"y"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2000), getProperty(xPara, u"ParaFirstLineIndent"_ustr)); xPara.set(getParagraph(7, u"page break"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPara, u"ParaFirstLineIndent"_ustr)); } CPPUNIT_TEST_FIXTURE(Test, testTdf148834_lineNumbering) { createSwDoc("tdf148834_lineNumbering.odt"); save(TestFilter::DOCX); xmlDocUniquePtr pStylesXml = parseExport(u"word/styles.xml"_ustr); // user specified: do not include in line numbering assertXPath(pStylesXml, "//w:style[@w:styleId='Normal']/w:pPr/w:suppressLineNumbers", 1); // even though it matches the parent style, these should always avoid showing line numbering assertXPath(pStylesXml, "//w:style[@w:styleId='Footer']/w:pPr/w:suppressLineNumbers", 1); assertXPath(pStylesXml, "//w:style[@w:styleId='0NUMBERED']/w:pPr/w:suppressLineNumbers", "val", u"0"); } CPPUNIT_TEST_FIXTURE(Test, testStyleAliases) { createSwDoc("styleAliases.docx"); save(TestFilter::DOCX); xmlDocUniquePtr pStylesXml = parseExport(u"word/styles.xml"_ustr); // Without the import and export support the aliases element was dropped. assertXPath(pStylesXml, "//w:style[@w:styleId='Heading3']/w:aliases", "val", u"Testskrift 1"); assertXPath(pStylesXml, "//w:style[@w:styleId='Emphasis']/w:aliases", "val", u"Testskrift 2"); } CPPUNIT_TEST_FIXTURE(Test, testTdf157598) { createSwDoc("tdf157598.docx"); save(TestFilter::DOCX); xmlDocUniquePtr pStylesXml = parseExport(u"word/styles.xml"_ustr); // Without the fix in place, this test would have failed with // - Expected: 0 // - Actual : 1 assertXPath(pStylesXml, "//w:style[@w:styleId='Normal']/w:rPr/w:rtl", 0); } CPPUNIT_TEST_FIXTURE(Test, testTdf76022_textboxWrap) { // Granted, this is an ODT with a bit of an anomaly - tables ignore fly wrapping. createSwDoc("tdf76022_textboxWrap.odt"); CPPUNIT_ASSERT_EQUAL_MESSAGE("Did you make wrapping sane/interoperable?", 1, getPages()); // When saving to DOCX, the table should obey the fly wrapping saveAndReload(TestFilter::DOCX); // The fly takes up the whole page, so the table needs to shift down to the next page. CPPUNIT_ASSERT_EQUAL(2, getPages()); } DECLARE_OOXMLEXPORT_TEST(testTdf134114_allowOverlap, "tdf134114_allowOverlap.docx") { // CPPUNIT_ASSERT_EQUAL(1, getPages()); CPPUNIT_ASSERT(!getProperty(getShape(1), u"AllowOverlap"_ustr)); CPPUNIT_ASSERT(getProperty(getShape(2), u"AllowOverlap"_ustr)); } CPPUNIT_TEST_FIXTURE(Test, testTdf149551_mongolianVert) { // Given a docx document with a shape with vert="mongolianVert". createSwDoc("tdf149551_mongolianVert.docx"); // The shape is imported as custom shape with attached frame. // Without fix the shape itself had WritingMode = 0 = LR_TB, // the frame in it had WritingMode = 2 = TB_RL. // It should be WritingMode = 3 = TB_LR in both cases. const sal_Int16 eExpected(text::WritingMode2::TB_LR); CPPUNIT_ASSERT_EQUAL(eExpected, getProperty(getShape(1), u"WritingMode"_ustr)); uno::Reference xShapeProps(getShape(1), uno::UNO_QUERY); uno::Reference xFrameProps(xShapeProps->getPropertyValue(u"TextBoxContent"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(eExpected, getProperty(xFrameProps, u"WritingMode"_ustr)); // Such shape must have vert="mongolianVert" again after saving. // Without fix the orientation was vert="vert". save(TestFilter::DOCX); xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); assertXPath(pXmlDoc, "//wps:bodyPr", "vert", u"mongolianVert"); } CPPUNIT_TEST_FIXTURE(Test, testTdf151912) { createSwDoc("tdf151912.docx"); save(TestFilter::DOCX); // For now just ensure roundtrip is successful //tdf#151548 - ensure block SDT preserves id (instead of random re-assignment) xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); assertXPath(pXmlDoc, "//w:sdt//w:sdtPr/w:id", "val", u"1802566103"); } CPPUNIT_TEST_FIXTURE(Test, testTdf147724) { skipValidation(); // ERROR Attribute 'storeItemID' must appear on element 'w:dataBinding'. createSwDoc("tdf147724.docx"); xmlDocUniquePtr pLayout = parseLayoutDump(); // Ensure we load field value from external XML correctly (it was "HERUNTERLADEN") assertXPathContent(pLayout, "/root/page[1]/body/txt[1]", u"Placeholder -> *ABC*"); // This SDT has no storage id, it is not an error, but content can be taken from any suitable XML // There 2 variants possible, both are acceptable OUString sFieldResult = getXPathContent(pLayout, "/root/page[1]/body/txt[2]"); CPPUNIT_ASSERT(sFieldResult == "Placeholder -> *HERUNTERLADEN*" || sFieldResult == "Placeholder -> *ABC*"); saveAndReload(TestFilter::DOCX); pLayout = parseLayoutDump(); // Ensure we load field value from external XML correctly (it was "HERUNTERLADEN") assertXPathContent(pLayout, "/root/page[1]/body/txt[1]", u"Placeholder -> *ABC*"); // This SDT has no storage id, it is not an error, but content can be taken from any suitable XML // There 2 variants possible, both are acceptable sFieldResult = getXPathContent(pLayout, "/root/page[1]/body/txt[2]"); CPPUNIT_ASSERT(sFieldResult == "Placeholder -> *HERUNTERLADEN*" || sFieldResult == "Placeholder -> *ABC*"); xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); assertXPath(pXmlDoc, "//w:p/w:sdt/w:sdtPr/w:dataBinding", 2); // two w:sdt's with w:dataBinding assertXPath(pXmlDoc, "//w:p[1]/w:sdt/w:sdtPr/w:dataBinding", "storeItemID", u"{4E8A9591-F074-446B-902F-511FF79C122F}"); // empty storeItemID's must not be specified: MS Word considers those document corrupt assertXPathNoAttribute(pXmlDoc, "//w:p[2]/w:sdt/w:sdtPr/w:dataBinding", "storeItemID"); } DECLARE_OOXMLEXPORT_TEST(testTdf130782, "chart.docx") { uno::Reference xTEOSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xAccess(xTEOSupplier->getEmbeddedObjects(), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xAccess->getCount()); uno::Reference xObj(xAccess->getByIndex(0), uno::UNO_QUERY); // these properties were not imported CPPUNIT_ASSERT_EQUAL(u"Diagramm 1"_ustr, xObj->getName()); CPPUNIT_ASSERT_EQUAL(u"uninspired default chart"_ustr, getProperty(xObj, u"Title"_ustr)); CPPUNIT_ASSERT_EQUAL(u"the description is here"_ustr, getProperty(xObj, u"Description"_ustr)); } CPPUNIT_TEST_FIXTURE(Test, testNumberPortionFormatFromODT) { // Given a document with a single paragraph, direct formatting asks 24pt font size for the // numbering and the text portion: createSwDoc("number-portion-format.odt"); // When saving to DOCX: save(TestFilter::DOCX); // Then make sure that the paragraph marker's char format has that custom font size: xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // - XPath '//w:pPr/w:rPr/w:sz' number of nodes is incorrect // i.e. was missing under 's . assertXPath(pXmlDoc, "//w:pPr/w:rPr/w:sz", "val", u"48"); } CPPUNIT_TEST_FIXTURE(Test, testParaStyleCharPosition) { // Given a loaded document where the Normal paragraph style has : createSwDoc("para-style-char-position.docx"); // When saving it back to DOCX: save(TestFilter::DOCX); // Then make sure that is not turned into a normal subscript text: xmlDocUniquePtr pXmlDoc = parseExport(u"word/styles.xml"_ustr); // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // - XPath '/w:styles/w:style[@w:styleId='Normal']/w:rPr/w:position' number of nodes is incorrect // i.e. we wrote instead of . assertXPath(pXmlDoc, "/w:styles/w:style[@w:styleId='Normal']/w:rPr/w:position", "val", u"-1"); } CPPUNIT_TEST_FIXTURE(Test, testTdf150966_regularInset) { // Given a docx document with a rectangular shape with height cy="900000" (EMU), tIns="180000" // and bIns="360000", resulting in 360000EMU text area height. createSwDoc("tdf150966_regularInset.docx"); // The shape is imported as custom shape with attached frame. // The insets are currently imported as margin top="4.99mm" and bottom="10mm". // That should result in tIns="179640" and bIns="360000" on export. // Without fix the insets were tIns="359280" and bIns="539640". The text area had 1080Emu height // and Word displays no text at all. save(TestFilter::DOCX); xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); assertXPathAttrs(pXmlDoc, "//wps:bodyPr", { { "tIns", u"179640" }, { "bIns", u"360000" } }); } CPPUNIT_TEST_FIXTURE(Test, testTdf152636_lostPageBreak) { createSwDoc("tdf152636_lostPageBreak.odt"); saveAndReload(TestFilter::DOCX); CPPUNIT_ASSERT_EQUAL(2, getPages()); } CPPUNIT_TEST_FIXTURE(Test, testTdf152636_lostPageBreak2) { createSwDoc("tdf152636_lostPageBreak2.docx"); saveAndReload(TestFilter::DOCX); CPPUNIT_ASSERT_EQUAL(2, getPages()); } CPPUNIT_TEST_FIXTURE(Test, testSdtDuplicatedId) { // Given a document with 2 inline , with each a : createSwDoc("sdt-duplicated-id.docx"); // When exporting that back to DOCX: save(TestFilter::DOCX); // Then make sure we write 2 and no duplicates: xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // Without the accompanying fix in place, this test would have failed with: // - Expected: 2 // - Actual : 4 // i.e. grab-bags introduced 2 unwanted duplicates. assertXPath(pXmlDoc, "//w:sdt", 2); } CPPUNIT_TEST_FIXTURE(Test, testImageCropping) { createSwDoc("crop-roundtrip.docx"); saveAndReload(TestFilter::DOCX); // the image has no cropping after roundtrip, because it has been physically cropped // NB: this test should be fixed when the core feature to show image cropped when it // has the "GraphicCrop" is set is implemented auto aGraphicCropStruct = getProperty(getShape(1), u"GraphicCrop"_ustr); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), aGraphicCropStruct.Left); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), aGraphicCropStruct.Right); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), aGraphicCropStruct.Top); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), aGraphicCropStruct.Bottom); } CPPUNIT_TEST_FIXTURE(Test, testTdf152200) { // Given a document with a fly anchored after a FORMTEXT in the end of the paragraph: createSwDoc("tdf152200-field+textbox.docx"); // When exporting that back to DOCX: save(TestFilter::DOCX); // Then make sure that fldChar with type 'end' goes prior to the at-char anchored fly. xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); const int nRunsBeforeFldCharEnd = countXPathNodes(pXmlDoc, "//w:fldChar[@w:fldCharType='end']/preceding::w:r"); CPPUNIT_ASSERT(nRunsBeforeFldCharEnd); const int nRunsBeforeAlternateContent = countXPathNodes(pXmlDoc, "//mc:AlternateContent/preceding::w:r"); CPPUNIT_ASSERT(nRunsBeforeAlternateContent); // Without the accompanying fix in place, this test would have failed with: // - Expected greater than: 6 // - Actual : 5 CPPUNIT_ASSERT_GREATER(nRunsBeforeFldCharEnd, nRunsBeforeAlternateContent); // Make sure we only have one paragraph in body, and only three field characters overall, // located directly in runs of this paragraph assertXPath(pXmlDoc, "/w:document/w:body/w:p"); assertXPath(pXmlDoc, "/w:document/w:body/w:p/w:r/w:fldChar", 3); assertXPath(pXmlDoc, "//w:fldChar", 3); // no field characters elsewhere } CPPUNIT_TEST_FIXTURE(Test, testTdf126477) { createSwDoc("embedded_chart.odt"); saveAndReload(TestFilter::DOCX); uno::Reference xTEOSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xAccess(xTEOSupplier->getEmbeddedObjects()); cpo::uno::Sequence aSeq(xAccess->getElementNames()); // Check number of embedded objects. CPPUNIT_ASSERT_EQUAL(sal_Int32(1), aSeq.getLength()); uno::Reference xEOSupplier(xAccess->getByName(aSeq[0]), uno::UNO_QUERY); uno::Reference xObj(xEOSupplier->getEmbeddedObject()); uno::Reference xTEOSupplier2(xObj, uno::UNO_QUERY); uno::Reference xAccess2(xTEOSupplier2->getEmbeddedObjects()); cpo::uno::Sequence aSeq2(xAccess2->getElementNames()); // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // i.e. the chart lost in the embedded document. CPPUNIT_ASSERT_EQUAL(sal_Int32(1), aSeq2.getLength()); } CPPUNIT_TEST_FIXTURE(Test, testTdf152425) { createSwDoc("tdf152425.docx"); saveAndReload(TestFilter::DOCX); // Check that "List Number" and "List 5" styles don't get merged const OUString Para3Style = getProperty(getParagraph(3), u"ParaStyleName"_ustr); CPPUNIT_ASSERT_EQUAL(u"Numbering 1"_ustr, Para3Style); const OUString Para4Style = getProperty(getParagraph(4), u"ParaStyleName"_ustr); CPPUNIT_ASSERT_EQUAL(u"List 5 (WW)"_ustr, Para4Style); // Also check that "List 5" and "List Bullet 5" styles don't get merged const OUString Para5Style = getProperty(getParagraph(5), u"ParaStyleName"_ustr); CPPUNIT_ASSERT_EQUAL(u"List 5"_ustr, Para5Style); } CPPUNIT_TEST_FIXTURE(Test, testTdf153104) { createSwDoc("tdf153104.docx"); saveAndReload(TestFilter::DOCX); xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); OUString numId = getXPath(pXmlDoc, "/w:document/w:body/w:p[1]/w:pPr/w:numPr/w:numId", "val"); xmlDocUniquePtr pXmlNum = parseExport(u"word/numbering.xml"_ustr); OString numPath = "/w:numbering/w:num[@w:numId='" + OUStringToOString(numId, RTL_TEXTENCODING_ASCII_US) + "']/"; // Check that first level's w:lvlOverride/w:startOverride is written correctly: // the list defines starting value of 10, which must be kept upon second level // numbering reset. // Without the fix, this would fail with // - Expected: 1 // - Actual : 0 // - In <>, XPath '/w:numbering/w:num[@w:numId='3']/w:lvlOverride[@w:ilvl='0']/w:startOverride' number of nodes is incorrect assertXPath(pXmlNum, numPath + "w:lvlOverride[@w:ilvl='0']/w:startOverride", "val", u"10"); assertXPath(pXmlNum, numPath + "w:lvlOverride[@w:ilvl='1']/w:startOverride", "val", u"1"); } CPPUNIT_TEST_FIXTURE(Test, testTdf153128) { createSwDoc("tdf153128.docx"); saveAndReload(TestFilter::DOCX); calcLayout(); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); sal_Int32 nFirstLineHeight = getXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/SwParaPortion", "height") .toInt32(); CPPUNIT_ASSERT_GREATER(sal_Int32(0), nFirstLineHeight); // The text height is 1 pt, i.e. 20 twip; without the fix, it would fail with // - Expected less than: 30 // - Actual : 414 CPPUNIT_ASSERT_LESS(sal_Int32(30), nFirstLineHeight); } CPPUNIT_TEST_FIXTURE(Test, testExportingUnknownStyleInRedline) { // This must not fail assertions createSwDoc("UnknownStyleInRedline.docx"); saveAndReload(TestFilter::DOCX); // Check that the original unknown style name "UnknownStyle" is roundtripped // (maybe this is wrong, because Word does not do this). xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); assertXPath(pXmlDoc, "/w:document/w:body/w:p/w:pPr/w:pPrChange/w:pPr/w:pStyle[@w:val='UnknownStyle']"); } CPPUNIT_TEST_FIXTURE(Test, testTdf148026) { createSwDoc("tdf148026.fodt"); saveAndReload(TestFilter::DOCX); xmlDocUniquePtr pXmlDoc = parseExport(u"word/document.xml"_ustr); // Without the accompanying fix in place, this test would have failed with: // - Expected: 1 // - Actual : 0 // - In <>, XPath '//w:hyperlink' number of nodes is incorrect // i.e. a HYPERLINK field was exported instead of the hyperlink XML element. assertXPath(pXmlDoc, "//w:hyperlink", "tgtFrame", u"_self"); } CPPUNIT_TEST_FIXTURE(Test, testTdf153664) { createSwDoc("Table-of-Figures.odt"); saveAndReload(TestFilter::DOCX); CPPUNIT_ASSERT_EQUAL(1, getPages()); xmlDocUniquePtr pXmlStyles = parseExport(u"word/styles.xml"_ustr); CPPUNIT_ASSERT(pXmlStyles); // Without the fix this was styleId='FigureIndex1' and name was "Figure Index 1" // This led to style settings being reset when ToF was updated in Word // TOF's paragraph style should be exported as "table of figures" as that's the default Word style name assertXPath(pXmlStyles, "/w:styles/w:style[12]", "styleId", u"TableofFigures"); assertXPath(pXmlStyles, "/w:styles/w:style[@w:styleId='TableofFigures']/w:name", "val", u"table of figures"); } DECLARE_OOXMLEXPORT_TEST(testTdf124472_hyperlink, "tdf124472.docx") { CPPUNIT_ASSERT_EQUAL(u"https://www.libreoffice.org/"_ustr, getProperty(getRun(getParagraph(1), 1), u"HyperLinkURL"_ustr)); CPPUNIT_ASSERT_EQUAL(u"mailto:info@libreoffice.org"_ustr, getProperty(getRun(getParagraph(2), 1), u"HyperLinkURL"_ustr)); CPPUNIT_ASSERT_EQUAL(u""_ustr, getProperty(getRun(getParagraph(3), 1), u"HyperLinkURL"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTdf135786, "tdf135786.docx") { // Empty first line remain, if the section's initial dummy paragraph is not deleted: // - Expected: 2 // - Actual : 3 CPPUNIT_ASSERT_EQUAL(2, getParagraphs()); } DECLARE_OOXMLEXPORT_TEST(testTdf155736, "tdf155736_PageNumbers_footer.docx") { CPPUNIT_ASSERT_EQUAL(2, getPages()); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/footer"); assertXPath(pXmlDoc, "/root/page[2]/footer"); //Without the fix in place, it would have failed with //- Expected: Page * of * //- Actual : Page of assertXPathContent(pXmlDoc, "/root/page[1]/footer/txt/text()", u"Page * of *"); assertXPathContent(pXmlDoc, "/root/page[2]/footer/txt/text()", u"Page * of *"); } // The following zOrder tests are checking the shapes "stacking height". // getShape(nZOrder) already gets them in lowest-to-highest order, // so for any overlapping shapes the highest numbered shape is expected to be the one on top. // Which shape that actually is can be usually be verified based on the shape name. DECLARE_OOXMLEXPORT_TEST(testTdf159158_zOrder_duplicate, "tdf159158_zOrder_duplicate_compat15.docx") { // given a yellow star with relativeHeight 2, followed by an overlapping blue star also with 2 uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher // the zOrder of the stars should remain consistent between round-trips - last duplicate wins // and compatibility has nothing to do with this for relativeHeight (other tests are compat12). CPPUNIT_ASSERT_EQUAL(u"5-Point Star Yellow"_ustr, getProperty(zOrder0, u"Name"_ustr)); CPPUNIT_ASSERT_EQUAL(u"5-Point Star Blue"_ustr, getProperty(zOrder1,u"Name"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTdf159158_zOrder_1and0equalA, "tdf159158_zOrder_1and0equalA.docx") { // given a yellow star with relativeHeight 1, followed by an overlapping blue star with 0 uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher // 0 is treated the same as 1 - the maximum value, so blue is duplicate - last duplicate wins CPPUNIT_ASSERT_EQUAL(u"5-Point Star Yellow"_ustr, getProperty(zOrder0, u"Name"_ustr)); CPPUNIT_ASSERT_EQUAL(u"5-Point Star Blue"_ustr, getProperty(zOrder1,u"Name"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTdf159158_zOrder_1and0equalB, "tdf159158_zOrder_1and0equalB.docx") { // given a yellow star with relativeHeight 0, followed by an overlapping blue star with 1 // since they have the same zOrder value, last one wins, so same result as version A uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher // 1 is treated the same as 0 - the maximum value, so blue is duplicate - last duplicate wins CPPUNIT_ASSERT_EQUAL(u"5-Point Star Yellow"_ustr, getProperty(zOrder0, u"Name"_ustr)); CPPUNIT_ASSERT_EQUAL(u"5-Point Star Blue"_ustr, getProperty(zOrder1,u"Name"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTdf159158_zOrder_1and0max, "tdf159158_zOrder_1and0max.docx") { // given a yellow star with maximum relativeHeight 503316479 (1DFF FFFF) // followed by an overlapping blue star with 0. uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher // 0 is treated the same as the maximum value, last duplicate wins, so blue is on top CPPUNIT_ASSERT_EQUAL(u"5-Point Star Yellow"_ustr, getProperty(zOrder0, u"Name"_ustr)); CPPUNIT_ASSERT_EQUAL(u"5-Point Star Blue"_ustr, getProperty(zOrder1,u"Name"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTdf159158_zOrder_maxLessOne, "tdf159158_zOrder_maxLessOne.docx") { // given a yellow star with relativeHeight 503316479 (1DFF FFFF) // followed by a partially hidden blue star with lower relativeHeight 503316478 (1DFF FFFE) uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher // since yellow is a higher value, it should be on top CPPUNIT_ASSERT_EQUAL(u"5-Point Star Blue"_ustr, getProperty(zOrder0,u"Name"_ustr)); CPPUNIT_ASSERT_EQUAL(u"5-Point Star Yellow"_ustr, getProperty(zOrder1, u"Name"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTdf159158_zOrder_max, "tdf159158_zOrder_max.docx") { // given a yellow star with (one higher than maximum) relativeHeight 503316480 (1E00 0000) // followed by an overlapping blue star with maximum relativeHeight 503316479 (1DFF FFFF) uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher // while yellow is a higher value, last duplicate wins, so lower value blue must be the maximum CPPUNIT_ASSERT_EQUAL(u"5-Point Star Yellow"_ustr, getProperty(zOrder0, u"Name"_ustr)); CPPUNIT_ASSERT_EQUAL(u"5-Point Star Blue"_ustr, getProperty(zOrder1,u"Name"_ustr)); } CPPUNIT_TEST_FIXTURE(Test, testTdf159158_zOrder_zIndexMax) { auto verify = [this](bool bIsExport = false) { // given a yellow star with a heaven z-index of MAX_SAL_INT32 // followed by overlapped blue star with a heaven z-index of MAX_SAL_INT32 - 1 uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher // there is no artificial maximum for z-index. All values are unique. Yellow is on top if (!bIsExport) //somehow the name is lost on this export { CPPUNIT_ASSERT_EQUAL(u"5-Point Star Blue"_ustr, getProperty(zOrder0, u"Name"_ustr)); CPPUNIT_ASSERT_EQUAL(u"5-Point Star Yellow"_ustr, getProperty(zOrder1,u"Name"_ustr)); } }; createSwDoc("tdf159158_zOrder_zIndexMax.docx"); verify(); saveAndReload(TestFilter::DOCX); verify(/*bIsExport*/ true); } CPPUNIT_TEST_FIXTURE(Test, testTdf159158_zOrder_zIndexDuplicate_compat15) { auto verify = [this](bool bIsExport = false) { // given a yellow star with a heaven z-index of MAX_SAL_INT32 - 1 // followed by overlapping blue star with the same heaven z-index (last duplicate wins) uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher // should be the same as relativeHeight - last duplicate wins so blue is on top. if (!bIsExport) //somehow the name is lost on this export { CPPUNIT_ASSERT_EQUAL(u"5-Point Star Yellow"_ustr, getProperty(zOrder0, u"Name"_ustr)); CPPUNIT_ASSERT_EQUAL(u"5-Point Star Blue"_ustr, getProperty(zOrder1,u"Name"_ustr)); } }; createSwDoc("tdf159158_zOrder_zIndexDuplicate_compat15.docx"); verify(); saveAndReload(TestFilter::DOCX); verify(/*bIsExport*/ true); } CPPUNIT_TEST_FIXTURE(Test, testTdf159158_zOrder_zIndexWins) { auto verify = [this](bool bIsExport = false) { // given a yellow star with relativeHeight 0 (typically a maximum value, but not today) // followed by an overlapping-everything textbox at z-index 0 (the lowest heaven-layer z-index) // followed by a partially overlapping blue star with a // seems-to-be-a-magic-number relativeHeight 251658240 (0F00 0000) uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); uno::Reference zOrder2(getShape(3), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), getProperty(zOrder2, u"ZOrder"_ustr)); // higher // I'm puzzled. Somehow 0 is larger than 0EFF FFFF, but not larger than 0F00 0000 // and yet the maximum value was established earlier as 1DFF FFFF. Something doesn't line up. // Perhaps 0 and 1 don't mean maximum value at all, but something completely different? CPPUNIT_ASSERT_MESSAGE("DID YOU FIX ME? I really should be yellow, not blue", "5-Point Star Yellow" != getProperty(zOrder0, u"Name"_ustr)); // CPPUNIT_ASSERT_EQUAL(OUString("5-Point Star Blue"), getProperty(zOrder1,"Name")); // If zOrder is defined by z-index, it seems that it goes above everything set by relativeHeight if (bIsExport) // not named on import CPPUNIT_ASSERT_EQUAL(u"Frame1"_ustr, getProperty(zOrder2,u"Name"_ustr)); }; createSwDoc("tdf159158_zOrder_zIndexWins.docx"); verify(); saveAndReload(TestFilter::DOCX); verify(/*bIsExport*/ true); } CPPUNIT_TEST_FIXTURE(Test, testTdf159158_zOrder_behindDocA) { auto verify = [this](bool bIsExport = false) { // given a yellow star with lowest relativeHeight 2 but behindDoc // followed by an overlapping blue star with negative z-index -1644167168. uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher // yellow is at the lowest hell-level possible for relativeHeight, so expected to be under blue CPPUNIT_ASSERT_EQUAL(u"5-Point Star Yellow"_ustr, getProperty(zOrder0, u"Name"_ustr)); if (!bIsExport) // the name is lost on export CPPUNIT_ASSERT_EQUAL(u"5-Point Star Blue"_ustr, getProperty(zOrder1,u"Name"_ustr)); }; createSwDoc("tdf159158_zOrder_behindDocA.docx"); verify(); saveAndReload(TestFilter::DOCX); verify(/*bIsExport*/ true); } CPPUNIT_TEST_FIXTURE(Test, testTdf159158_zOrder_behindDocB) { auto verify = [this](bool bIsExport = false) { // given a yellow star with a high relativeHeight 503314431 (1DFF F7FF) but behindDoc // followed by an overlapping blue star with negative z-index -1644167168. uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher // yellow is at the highest hell-level possible for relativeHeight, // so you will be forgiven for thinking yellow should be on the top. // Any z-index level ends up being above any relativeHeight, so blue should still be on top CPPUNIT_ASSERT_EQUAL(u"5-Point Star Yellow"_ustr, getProperty(zOrder0, u"Name"_ustr)); if (!bIsExport) // the name is lost on export CPPUNIT_ASSERT_EQUAL(u"5-Point Star Blue"_ustr, getProperty(zOrder1,u"Name"_ustr)); }; createSwDoc("tdf159158_zOrder_behindDocB.docx"); verify(); saveAndReload(TestFilter::DOCX); verify(/*bIsExport*/ true); } CPPUNIT_TEST_FIXTURE(Test, testTdf159158_zOrder_headerBehind) { createSwDoc("tdf159158_zOrder_headerBehind.odt"); { // given a blue star (not marked as behind text) anchored in the header // and an overlapping yellow rectangle anchored in the body text. // (note that in ODT format the star is on top, but for DOCX format it must be behind (hidden) uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher CPPUNIT_ASSERT_EQUAL(u"RectangleInBody"_ustr, getProperty(zOrder0, u"Name"_ustr)); CPPUNIT_ASSERT_EQUAL(u"StarInHeader"_ustr, getProperty(zOrder1, u"Name"_ustr)); } maTempFile.EnableKillingFile(false); saveAndReload(TestFilter::DOCX); { // given a blue star (not marked as behind text) anchored in the header // and an overlapping yellow rectangle anchored in the body text. // (note that in ODT format the star is on top, but for DOCX format it must be behind (hidden) uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher CPPUNIT_ASSERT_EQUAL(u"StarInHeader"_ustr, getProperty(zOrder0, u"Name"_ustr)); CPPUNIT_ASSERT_EQUAL(u"RectangleInBody"_ustr, getProperty(zOrder1, u"Name"_ustr)); } maTempFile.EnableKillingFile(); } DECLARE_OOXMLEXPORT_TEST(testTdf159158_zOrder_headerBehind2, "tdf159158_zOrder_headerBehind2.docx") { // given a logo (marked as behind text) anchored in the header // and an overlapping blue rectangle anchored in the body text. uno::Reference zOrder0(getShape(1), uno::UNO_QUERY); uno::Reference zOrder1(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(zOrder0, u"ZOrder"_ustr)); // lower CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getProperty(zOrder1, u"ZOrder"_ustr)); // higher CPPUNIT_ASSERT_EQUAL(u"HeaderImage"_ustr, getProperty(zOrder0, u"LinkDisplayName"_ustr)); CPPUNIT_ASSERT_EQUAL(u"BodyBlueRectangle"_ustr, getProperty(zOrder1, u"LinkDisplayName"_ustr)); // The logo should not be opaque since it is in the header. CPPUNIT_ASSERT(!getProperty(zOrder0, u"Opaque"_ustr)); // logo should be invisible CPPUNIT_ASSERT(!getProperty(zOrder1, u"Opaque"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTdf155903, "tdf155903.odt") { // Without the accompanying fix in place, this test would have crashed, // because the exported file was corrupted. } CPPUNIT_PLUGIN_IMPLEMENT(); /* vim:set shiftwidth=4 softtabstop=4 expandtab: */