/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the Collabora Office project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #ifdef MACOSX #define __ASSERT_MACROS_DEFINE_VERSIONS_WITHOUT_UNDERSCORES 0 #include #include #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace css; using namespace css::uno; class Test : public SwModelTestBase { public: Test() : SwModelTestBase(u"/sw/qa/extras/ooxmlexport/data/"_ustr) {} }; DECLARE_OOXMLEXPORT_TEST(testN751054, "n751054.docx") { text::TextContentAnchorType eValue = getProperty(getShape(1), u"AnchorType"_ustr); CPPUNIT_ASSERT(eValue != text::TextContentAnchorType_AS_CHARACTER); } CPPUNIT_TEST_FIXTURE(Test, testTdf48569) { createSwDoc("tdf48569.odt"); saveAndReload(TestFilter::DOCX); CPPUNIT_ASSERT_EQUAL(2, getShapes()); CPPUNIT_ASSERT_EQUAL(1, getPages()); // File crashing while saving in LO text::TextContentAnchorType eValue = getProperty(getShapeByName(u"Marco1"), u"AnchorType"_ustr); CPPUNIT_ASSERT_EQUAL(text::TextContentAnchorType_AS_CHARACTER, eValue); } DECLARE_OOXMLEXPORT_TEST(testN751117, "n751117.docx") { // First shape: the end should be an arrow, should be rotated and should be flipped. uno::Reference xPropertySet(getShape(1), uno::UNO_QUERY); OUString aValue; xPropertySet->getPropertyValue(u"LineEndName"_ustr) >>= aValue; CPPUNIT_ASSERT(aValue.indexOf("Arrow") != -1); // Rotating & Flipping will cause the angle to change from 90 degrees to 270 degrees sal_Int32 nValue = 0; xPropertySet->getPropertyValue(u"RotateAngle"_ustr) >>= nValue; CPPUNIT_ASSERT_EQUAL(sal_Int32(270 * 100), nValue); uno::Reference xShape(xPropertySet, uno::UNO_QUERY); awt::Size aActualSize(xShape->getSize()); CPPUNIT_ASSERT(aActualSize.Width > 0); // The second shape should be a line uno::Reference xServiceInfo(getShape(2), uno::UNO_QUERY); CPPUNIT_ASSERT(xServiceInfo->supportsService(u"com.sun.star.drawing.LineShape"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testFdo74745, "fdo74745.docx") { uno::Reference paragraph = getParagraph(3); CPPUNIT_ASSERT_EQUAL(u"09/02/2014"_ustr, paragraph->getString()); } DECLARE_OOXMLEXPORT_TEST(testFdo81486, "fdo81486.docx") { uno::Reference paragraph = getParagraph(1); CPPUNIT_ASSERT_EQUAL(u"CustomTitle"_ustr, paragraph->getString()); } DECLARE_OOXMLEXPORT_TEST(testFdo79738, "fdo79738.docx") { uno::Reference< style::XStyleFamiliesSupplier > xStylesSupplier( mxComponent, uno::UNO_QUERY_THROW ); uno::Reference< container::XNameAccess > xStyleFamilies = xStylesSupplier->getStyleFamilies(); uno::Reference xStyles; xStyleFamilies->getByName(u"ParagraphStyles"_ustr) >>= xStyles; uno::Reference xPropertySetHeader( xStyles->getByName(u"Header"_ustr), uno::UNO_QUERY ); CPPUNIT_ASSERT_EQUAL(false, xPropertySetHeader->getPropertyValue(u"ParaLineNumberCount"_ustr).get()); uno::Reference xPropertySetFooter( xStyles->getByName(u"Footer"_ustr), uno::UNO_QUERY ); CPPUNIT_ASSERT_EQUAL(false, xPropertySetFooter->getPropertyValue(u"ParaLineNumberCount"_ustr).get()); } DECLARE_OOXMLEXPORT_TEST(testN705956_1, "n705956-1.docx") { /* Get the first image in the document and check it's the one image in the document. It should be also anchored inline (as character) and be inside a groupshape. image = ThisComponent.DrawPage.getByIndex(0) graphic = image(0).Graphic xray graphic.Size xray image.AnchorType */ CPPUNIT_ASSERT_EQUAL(1, getShapes()); uno::Reference shapes(getShape(1), uno::UNO_QUERY); uno::Reference image; shapes->getByIndex(0) >>= image; uno::Reference imageProperties(image, uno::UNO_QUERY); uno::Reference graphic; imageProperties->getPropertyValue( u"Graphic"_ustr ) >>= graphic; uno::Reference bitmap(graphic, uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL( static_cast(120), bitmap->getSize().Width ); CPPUNIT_ASSERT_EQUAL( static_cast(106), bitmap->getSize().Height ); text::TextContentAnchorType anchorType; imageProperties->getPropertyValue( u"AnchorType"_ustr ) >>= anchorType; CPPUNIT_ASSERT_EQUAL( text::TextContentAnchorType_AS_CHARACTER, anchorType ); } DECLARE_OOXMLEXPORT_TEST(testN705956_2, "n705956-2.docx") { /* must be global, reachable even from inside another image = ThisComponent.DrawPage.getByIndex(0) xray image.FillColor */ uno::Reference image = getShape(1); uno::Reference imageProperties(image, uno::UNO_QUERY); Color fillColor; imageProperties->getPropertyValue( u"FillColor"_ustr ) >>= fillColor; CPPUNIT_ASSERT_EQUAL( Color( 0xc0504d ), fillColor ); } DECLARE_OOXMLEXPORT_TEST(testN747461, "n747461.docx") { /* The document contains 3 images (Red, Black, Green, in this order), with explicit w:relativeHeight (300, 0, 225763766). Check that they are in the right ZOrder after they are loaded. */ uno::Reference image1 = getShape(1), image2 = getShape(2), image3 = getShape(3); sal_Int32 zOrder1, zOrder2, zOrder3; OUString descr1, descr2, descr3; uno::Reference imageProperties1(image1, uno::UNO_QUERY); imageProperties1->getPropertyValue( u"ZOrder"_ustr ) >>= zOrder1; imageProperties1->getPropertyValue( u"Description"_ustr ) >>= descr1; uno::Reference imageProperties2(image2, uno::UNO_QUERY); imageProperties2->getPropertyValue( u"ZOrder"_ustr ) >>= zOrder2; imageProperties2->getPropertyValue( u"Description"_ustr ) >>= descr2; uno::Reference imageProperties3(image3, uno::UNO_QUERY); imageProperties3->getPropertyValue( u"ZOrder"_ustr ) >>= zOrder3; imageProperties3->getPropertyValue( u"Description"_ustr ) >>= descr3; CPPUNIT_ASSERT_EQUAL( sal_Int32( 0 ), zOrder1 ); CPPUNIT_ASSERT_EQUAL( sal_Int32( 1 ), zOrder2 ); CPPUNIT_ASSERT_EQUAL( sal_Int32( 2 ), zOrder3 ); CPPUNIT_ASSERT_EQUAL(u"Red"_ustr, descr1); CPPUNIT_ASSERT_EQUAL(u"Green"_ustr, descr2); CPPUNIT_ASSERT_EQUAL(u"Black"_ustr, descr3); // tdf#159158: black should be on top // tdf#139915/tdf#159157 This was 826, but it should be -826 CPPUNIT_ASSERT_EQUAL(sal_Int32(-826), getProperty(image3, u"VertOrientPosition"_ustr)); sal_Int16 nExpected = text::RelOrientation::TEXT_LINE; CPPUNIT_ASSERT_EQUAL(nExpected, getProperty(image1, u"VertOrientRelation"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testN750255, "n750255.docx") { /* Column break without columns on the page is a page break, so check those paragraphs are on page 2 and page 3 */ xmlDocUniquePtr pXmlDoc = parseLayoutDump(); assertXPathContent(pXmlDoc, "/root/page[2]/body/txt/text()", u"one"); assertXPathContent(pXmlDoc, "/root/page[3]/body/txt/text()", u"two"); } DECLARE_OOXMLEXPORT_TEST(testN652364, "n652364.docx") { /* Related to 750255 above, column break with columns on the page however should be a column break. enum = ThisComponent.Text.createEnumeration enum.nextElement para1 = enum.nextElement xray para1.String xray para1.PageStyleName enum.nextElement para2 = enum.nextElement xray para2.String xray para2.PageStyleName */ // get the 2nd and 4th paragraph uno::Reference paragraph1(getParagraph( 2, u"text1"_ustr )); uno::Reference paragraph2(getParagraph( 4, u"text2"_ustr )); OUString pageStyle1 = getProperty< OUString >( paragraph1, u"PageStyleName"_ustr ); OUString pageStyle2 = getProperty< OUString >( paragraph2, u"PageStyleName"_ustr ); // "Standard" is the style for the first page (2nd is "Converted1"). CPPUNIT_ASSERT_EQUAL( u"Standard"_ustr, pageStyle1 ); CPPUNIT_ASSERT_EQUAL( u"Standard"_ustr, pageStyle2 ); } DECLARE_OOXMLEXPORT_TEST(testN764005, "n764005.docx") { uno::Reference xPropertySet(getShape(1), uno::UNO_QUERY); // The picture in the header wasn't absolutely positioned and wasn't in the background. text::TextContentAnchorType eValue; xPropertySet->getPropertyValue(u"AnchorType"_ustr) >>= eValue; CPPUNIT_ASSERT(eValue != text::TextContentAnchorType_AS_CHARACTER); bool bValue = true; xPropertySet->getPropertyValue(u"Opaque"_ustr) >>= bValue; CPPUNIT_ASSERT_EQUAL(false, bValue); } DECLARE_OOXMLEXPORT_TEST(testN766481, "n766481.docx") { /* * The problem was that we had an additional paragraph before the pagebreak. * * oParas = ThisComponent.Text.createEnumeration * oPara = oParas.nextElement * oPara = oParas.nextElement * xray oParas.hasMoreElements ' should be false */ uno::Reference xTextDocument(mxComponent, uno::UNO_QUERY); uno::Reference xParaEnumAccess(xTextDocument->getText(), uno::UNO_QUERY); uno::Reference xParaEnum(xParaEnumAccess->createEnumeration()); for (int i = 0; i < 2; ++i) xParaEnum->nextElement(); CPPUNIT_ASSERT_EQUAL(false, xParaEnum->hasMoreElements()); } DECLARE_OOXMLEXPORT_TEST(testN766487, "n766487.docx") { /* * The problem was that 1) the font size of the first para was too large 2) numbering had no first-line-indent. * * oParas = ThisComponent.Text.createEnumeration * oPara = oParas.nextElement * oRuns = oPara.createEnumeration * oRun = oRuns.nextElement * xray oRun.CharHeight ' 11, was larger * oPara = oParas.nextElement * xray oPara.ParaFirstLineIndent ' -635, was 0 */ uno::Reference xTextDocument(mxComponent, uno::UNO_QUERY); uno::Reference xParaEnumAccess(xTextDocument->getText(), uno::UNO_QUERY); uno::Reference xParaEnum(xParaEnumAccess->createEnumeration()); uno::Reference xRunEnumAccess(xParaEnum->nextElement(), uno::UNO_QUERY); uno::Reference xRunEnum(xRunEnumAccess->createEnumeration()); uno::Reference xPropertySet(xRunEnum->nextElement(), uno::UNO_QUERY); float fValue = 0; xPropertySet->getPropertyValue(u"CharHeight"_ustr) >>= fValue; CPPUNIT_ASSERT_EQUAL(11.f, fValue); xPropertySet.set(xParaEnum->nextElement(), uno::UNO_QUERY); sal_Int32 nValue = 0; xPropertySet->getPropertyValue(u"ParaFirstLineIndent"_ustr) >>= nValue; CPPUNIT_ASSERT_EQUAL(sal_Int32(convertTwipToMm100(-360)), nValue); } DECLARE_OOXMLEXPORT_TEST(testN693238, "n693238.docx") { /* * The problem was that a continuous section break at the end of the doc caused the margins to be ignored. * * xray ThisComponent.StyleFamilies.PageStyles.Default.LeftMargin ' was 2000, should be 635 */ uno::Reference xPropertySet(getStyles(u"PageStyles"_ustr)->getByName(u"Standard"_ustr), uno::UNO_QUERY); sal_Int32 nValue = 0; xPropertySet->getPropertyValue(u"LeftMargin"_ustr) >>= nValue; CPPUNIT_ASSERT_EQUAL(sal_Int32(635), nValue); } DECLARE_OOXMLEXPORT_TEST(testNumbering1, "numbering1.docx") { /* in the paragraph itself was overridden by introduced by the paragraph's enum = ThisComponent.Text.createEnumeration para = enum.NextElement xray para.NumberingStyleName numberingstyle = ThisComponent.NumberingRules.getByIndex(6) xray numberingstyle.name - should match name above numbering = numberingstyle.getByIndex(0) xray numbering(11) - should be 4, arabic note that the indexes may get off as the implementation evolves, C++ code searches in loops */ uno::Reference< text::XTextRange > paragraph(getParagraph( 1, u"Text1."_ustr )); OUString numberingStyleName = getProperty< OUString >( paragraph, u"NumberingStyleName"_ustr ); uno::Reference xNumberingRulesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference numberingRules = xNumberingRulesSupplier->getNumberingRules(); uno::Reference numberingRule; for( int i = 0; i < numberingRules->getCount(); ++i ) { OUString name = getProperty< OUString >( numberingRules->getByIndex( i ), u"Name"_ustr ); if( name == numberingStyleName ) { numberingRule.set( numberingRules->getByIndex( i ), uno::UNO_QUERY ); break; } } CPPUNIT_ASSERT( numberingRule.is()); cpo::uno::Sequence< beans::PropertyValue > numbering; numberingRule->getByIndex( 0 ) >>= numbering; sal_Int16 numberingType = style::NumberingType::NUMBER_NONE; for( int i = 0; i < numbering.getLength(); ++i ) { if( numbering[ i ].Name == "NumberingType" ) { numbering[ i ].Value >>= numberingType; break; } } CPPUNIT_ASSERT_EQUAL( style::NumberingType::ARABIC, numberingType ); } DECLARE_OOXMLEXPORT_TEST(testAllGapsWord, "all_gaps_word.docx") { BorderTest borderTest; BorderTest::testTheBorders(mxComponent, false); } DECLARE_OOXMLEXPORT_TEST(testN775906, "n775906.docx") { /* * The problem was that right margin (via direct formatting) erased the left/first margin (inherited from numbering style). * * oParas = ThisComponent.Text.createEnumeration * oPara = oParas.nextElement * xray oPara.ParaFirstLineIndent ' was 0 * xray oPara.ParaLeftMargin ' was 0 */ CPPUNIT_ASSERT_EQUAL(sal_Int32(-635), getProperty(getParagraph(1), u"ParaFirstLineIndent"_ustr)); CPPUNIT_ASSERT_EQUAL(sal_Int32(1905), getProperty(getParagraph(1), u"ParaLeftMargin"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTdf59699, "tdf59699.docx") { uno::Reference xImage(getShape(1), uno::UNO_QUERY); auto xGraphic = getProperty >(xImage, u"Graphic"_ustr); // This was false: the referenced graphic data wasn't imported. CPPUNIT_ASSERT(xGraphic.is()); } DECLARE_OOXMLEXPORT_TEST(testN777337, "n777337.docx") { // The problem was that the top and bottom margin on the first page was only 0.1cm instead of 1.7cm. uno::Reference xPropertySet(getStyles(u"PageStyles"_ustr)->getByName(u"Standard"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(1702), getProperty(xPropertySet, u"TopMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(sal_Int32(1702), getProperty(xPropertySet, u"BottomMargin"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testN778836, "n778836.docx") { /* * The problem was that the paragraph inherited margins from the numbering * and parent paragraph styles and the result was incorrect. */ CPPUNIT_ASSERT_EQUAL(sal_Int32(1270), getProperty(getParagraph(1), u"ParaRightMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(sal_Int32(3810), getProperty(getParagraph(1), u"ParaLeftMargin"_ustr)); CPPUNIT_ASSERT_EQUAL(sal_Int32(-635), getProperty(getParagraph(1), u"ParaFirstLineIndent"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testN778828, "n778828.docx") { /* * The problem was that a page break after a continuous section break caused * double page break on title page. */ CPPUNIT_ASSERT_EQUAL(2, getPages()); } DECLARE_OOXMLEXPORT_TEST(testTdf106724, "tdf106724.docx") { // This document simply crashed the importer. } DECLARE_OOXMLEXPORT_TEST(testN779834, "n779834.docx") { // This document simply crashed the importer. } DECLARE_OOXMLEXPORT_TEST(testRHBZ1180114, "rhbz1180114.docx") { // This document simply crashed the importer. } DECLARE_OOXMLEXPORT_TEST(testTdf66496, "tdf66496.docx") { // This document simply crashed the importer. } DECLARE_OOXMLEXPORT_TEST(testTDF91122, "tdf91122.docx") { /* * OLE object shape: default vertical position is top in MSO, not bottom */ { // Check first shape uno::Reference xShapeProperties( getShape(1), uno::UNO_QUERY ); uno::Reference xShapeDescriptor(xShapeProperties, uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(u"FrameShape"_ustr, xShapeDescriptor->getShapeType()); sal_Int16 nValue; xShapeProperties->getPropertyValue(u"VertOrient"_ustr) >>= nValue; CPPUNIT_ASSERT_EQUAL_MESSAGE("Wrong vertical orientation", text::VertOrientation::TOP, nValue); } { // Check second shape uno::Reference xShapeProperties( getShape(2), uno::UNO_QUERY ); uno::Reference xShapeDescriptor(xShapeProperties, uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(u"FrameShape"_ustr, xShapeDescriptor->getShapeType()); sal_Int16 nValue; xShapeProperties->getPropertyValue(u"VertOrient"_ustr) >>= nValue; CPPUNIT_ASSERT_EQUAL_MESSAGE("Wrong vertical orientation", text::VertOrientation::TOP, nValue); } } CPPUNIT_TEST_FIXTURE(Test, testFdo76803) { createSwDoc("fdo76803.docx"); saveAndReload(TestFilter::DOCX); // The ContourPolyPolygon was wrong uno::Reference xPropertySet(getShape(1), uno::UNO_QUERY); drawing::PointSequenceSequence rContour = getProperty(xPropertySet, u"ContourPolyPolygon"_ustr); basegfx::B2DPolyPolygon aPolyPolygon(basegfx::utils::UnoPointSequenceSequenceToB2DPolyPolygon(rContour)); // We've got exactly one polygon inside CPPUNIT_ASSERT_EQUAL(sal_uInt32(1), aPolyPolygon.count()); // Now check it deeply basegfx::B2DPolygon aPolygon(aPolyPolygon.getB2DPolygon(0)); CPPUNIT_ASSERT_EQUAL(sal_uInt32(4), aPolygon.count()); CPPUNIT_ASSERT_EQUAL(double(-150), aPolygon.getB2DPoint(0).getX()); // Without the accompanying fix in place, this test would have failed with: // - Expected: -35 // - Actual : -67 // i.e. the cropping did not influence the wrap polygon during export. CPPUNIT_ASSERT_EQUAL(double(-35), aPolygon.getB2DPoint(0).getY()); CPPUNIT_ASSERT_EQUAL(double(-150), aPolygon.getB2DPoint(1).getX()); CPPUNIT_ASSERT_EQUAL(double(3514), aPolygon.getB2DPoint(1).getY()); CPPUNIT_ASSERT_EQUAL(double(16891), aPolygon.getB2DPoint(2).getX()); CPPUNIT_ASSERT_EQUAL(double(3514), aPolygon.getB2DPoint(2).getY()); CPPUNIT_ASSERT_EQUAL(double(16891), aPolygon.getB2DPoint(3).getX()); CPPUNIT_ASSERT_EQUAL(double(-35), aPolygon.getB2DPoint(3).getY()); } DECLARE_OOXMLEXPORT_TEST(testTDF91260, "tdf91260.docx") { uno::Reference xFrame(getShape(1), uno::UNO_QUERY); CPPUNIT_ASSERT(xFrame->getString().startsWith( "Lorem ipsum" ) ); //Check the textbox doesn't get shrunk CPPUNIT_ASSERT_GREATER(sal_Int32(10900), getProperty(xFrame, u"Height"_ustr)); uno::Reference xShape(getShape(1), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(5450), xShape->getPosition().X); CPPUNIT_ASSERT_EQUAL(sal_Int32(21946), xShape->getPosition().Y); } DECLARE_OOXMLEXPORT_TEST(testFdo74357, "fdo74357.docx") { // Normal outer table, floating inner table. uno::Reference xTextTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xIndexAccess(xTextTablesSupplier->getTextTables(), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), xIndexAccess->getCount()); // Bottom margin of the first paragraph was too large, causing a layout problem. // This was 494. CPPUNIT_ASSERT_EQUAL(sal_Int32(86), getProperty(getParagraph(1), u"ParaBottomMargin"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testFdo55187, "fdo55187.docx") { // 0x010d was imported as a newline. getParagraph(1, u"lup\u010Dka"_ustr); } DECLARE_OOXMLEXPORT_TEST(testN780563, "n780563.docx") { /* * Make sure we have the table in the fly frame created */ uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables( ), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xTables->getCount( )); } DECLARE_OOXMLEXPORT_TEST(testN780853, "n780853.docx") { /* * The problem was that the table was not imported. * * xray ThisComponent.TextTables.Count 'was 0 */ uno::Reference xTextTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xIndexAccess(xTextTablesSupplier->getTextTables(), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xIndexAccess->getCount()); //tdf#102619 - I would have expected this to be "Standard", but MSO 2013/2010/2003 all give FollowStyle==Date uno::Reference< beans::XPropertySet > properties(getStyles(u"ParagraphStyles"_ustr)->getByName(u"Date"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(u"Date"_ustr, getProperty(properties, u"FollowStyle"_ustr)); // tdf#170208: compatibilityMode12 document - emulate table placement // MS Word conjures up an 'indent from left' tblInd that cancels out the 'shift by cell margin'. // Without the fix, it spilled into the left margin by the border spacing distance (-203/0.2cm) uno::Reference xTable(xIndexAccess->getByIndex(0), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(static_cast(0), getProperty(xTable, u"LeftMargin"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testN780843, "n780843.docx") { xmlDocUniquePtr pXmlDoc = parseLayoutDump(); assertXPathContent(pXmlDoc, "/root/page[2]/footer/txt/text()", u"shown footer"); //tdf64372 this document should only have one page break (2 pages, not 3) CPPUNIT_ASSERT_EQUAL(2, getPages()); } DECLARE_OOXMLEXPORT_TEST(testN780843b, "n780843b.docx") { // Same document as testN780843 except there is more text before the continuous break. Now the opposite footer results should happen. uno::Reference< text::XTextRange > xPara = getParagraph(3); OUString aStyleName = getProperty(xPara, u"PageStyleName"_ustr); uno::Reference xPageStyle(getStyles(u"PageStyles"_ustr)->getByName(aStyleName), uno::UNO_QUERY); uno::Reference xFooterText = getProperty< uno::Reference >(xPageStyle, u"FooterText"_ustr); CPPUNIT_ASSERT_EQUAL( u"hidden footer"_ustr, xFooterText->getString() ); CPPUNIT_ASSERT_EQUAL( 7, getParagraphs() ); } DECLARE_OOXMLEXPORT_TEST(testShadow, "imgshadow.docx") { /* * The problem was that drop shadows on inline images were not being * imported and applied. */ uno::Reference xPropertySet(getShape(2), uno::UNO_QUERY); bool bShadow = getProperty(xPropertySet, u"Shadow"_ustr); CPPUNIT_ASSERT(bShadow); sal_Int32 nShadowXDistance = getProperty(xPropertySet, u"ShadowXDistance"_ustr); CPPUNIT_ASSERT(nShadowXDistance != 0); } DECLARE_OOXMLEXPORT_TEST(testN782345, "n782345.docx") { /* * The problem was that the page break was inserted before the 3rd para, instead of before the 2nd para. */ CPPUNIT_ASSERT_EQUAL(style::BreakType_PAGE_BEFORE, getProperty(getParagraph(2), u"BreakType"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testN779941, "n779941.docx") { /* * Make sure top/bottom margins of tables are set to 0 (problem was: bottom margin set to 0.35cm) */ uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables( ), uno::UNO_QUERY); uno::Reference xTableProperties(xTables->getByIndex(0), uno::UNO_QUERY); { cpo::uno::Any aValue = xTableProperties->getPropertyValue(u"TopMargin"_ustr); sal_Int32 nTopMargin; aValue >>= nTopMargin; CPPUNIT_ASSERT_EQUAL(sal_Int32(0), nTopMargin); } { cpo::uno::Any aValue = xTableProperties->getPropertyValue(u"BottomMargin"_ustr); sal_Int32 nBottomMargin; aValue >>= nBottomMargin; CPPUNIT_ASSERT_EQUAL(sal_Int32(0), nBottomMargin); } } DECLARE_OOXMLEXPORT_TEST(testN783638, "n783638.docx") { // The problem was that the margins of inline images were not zero. uno::Reference xPropertySet(getShape(1), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(xPropertySet, u"LeftMargin"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testFdo52208, "fdo52208.docx") { // The problem was that the document had 2 pages instead of 1. CPPUNIT_ASSERT_EQUAL(1, getPages()); } DECLARE_OOXMLEXPORT_TEST(testN785767, "n785767.docx") { uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables( ), uno::UNO_QUERY); uno::Reference xTextTable(xTables->getByIndex(0), uno::UNO_QUERY); uno::Reference xTableRows = xTextTable->getRows(); // Check the A1 and B1 cells, the width of both of them was the default value (10000 / 9, as there were 9 cells in the row). CPPUNIT_ASSERT_MESSAGE("A1 must not have default width", sal_Int16(UNO_TABLE_COLUMN_SUM / 9) != getProperty< cpo::uno::Sequence >(xTableRows->getByIndex(0), u"TableColumnSeparators"_ustr)[0].Position); CPPUNIT_ASSERT_MESSAGE("B1 must not have default width", sal_Int16(UNO_TABLE_COLUMN_SUM / 9) != getProperty< cpo::uno::Sequence >(xTableRows->getByIndex(1), u"TableColumnSeparators"_ustr)[0].Position); } DECLARE_OOXMLEXPORT_TEST(testFineTableDash, "tableborder-finedash.docx") { // The problem was that finely dashed borders on tables were unsupported uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables( ), uno::UNO_QUERY); uno::Reference xTableProperties(xTables->getByIndex(0), uno::UNO_QUERY); table::TableBorder2 aBorder; xTableProperties->getPropertyValue(u"TableBorder2"_ustr) >>= aBorder; CPPUNIT_ASSERT_EQUAL(table::BorderLineStyle::FINE_DASHED, aBorder.RightLine.LineStyle); } DECLARE_OOXMLEXPORT_TEST(testN792778, "n792778.docx") { /* * The problem was that the importer didn't handle complex groupshapes with groupshapes, textboxes and graphics inside. * * xray ThisComponent.DrawPage.Count ' 1 groupshape * xray ThisComponent.DrawPage(0).Count ' 2 sub-groupshapes * xray ThisComponent.DrawPage(0).getByIndex(0).Count ' first sub-groupshape: 1 pic * xray ThisComponent.DrawPage(0).getByIndex(1).Count ' second sub-groupshape: 1 pic * xray ThisComponent.DrawPage(0).getByIndex(0).getByIndex(0).Position.Y ' 11684, the vertical position of the shapes were also wrong * xray ThisComponent.DrawPage(0).getByIndex(1).getByIndex(0).Position.Y ' 11684 */ CPPUNIT_ASSERT_EQUAL(1, getShapes()); uno::Reference xGroupShape(getShape(1), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), xGroupShape->getCount()); uno::Reference xInnerGroupShape(xGroupShape->getByIndex(0), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xInnerGroupShape->getCount()); uno::Reference xInnerShape(xInnerGroupShape->getByIndex(0), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(11684), xInnerShape->getPosition().Y); xInnerGroupShape.set(xGroupShape->getByIndex(1), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xInnerGroupShape->getCount()); xInnerShape.set(xInnerGroupShape->getByIndex(0), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(11684), xInnerShape->getPosition().Y); } DECLARE_OOXMLEXPORT_TEST(testGroupshapeSmarttag, "groupshape-smarttag.docx") { uno::Reference xGroupShape(getShape(1), uno::UNO_QUERY); uno::Reference xShape(xGroupShape->getByIndex(0), uno::UNO_QUERY); // First run of shape text was missing due to the w:smartTag wrapper around it. CPPUNIT_ASSERT_EQUAL(u"Box 2"_ustr, xShape->getString()); // Font size of the shape text was 10. CPPUNIT_ASSERT_EQUAL(12.f, getProperty(getParagraphOfText(1, xShape->getText()), u"CharHeight"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testN793262, "n793262.docx") { uno::Reference xHeaderText = getProperty< uno::Reference >(getStyles(u"PageStyles"_ustr)->getByName(u"Standard"_ustr), u"HeaderText"_ustr); uno::Reference xHeaderParagraphs(xHeaderText->createEnumeration()); xHeaderParagraphs->nextElement(); // Font size of the last empty paragraph in the header was ignored, this was 11. CPPUNIT_ASSERT_EQUAL(16.f, getProperty(xHeaderParagraphs->nextElement(), u"CharHeight"_ustr)); uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables(), uno::UNO_QUERY); uno::Reference xTable(xTables->getByIndex(0), uno::UNO_QUERY); // Cell margins as direct formatting were ignored, this was 0. CPPUNIT_ASSERT_EQUAL(sal_Int32(76), getProperty(xTable->getCellByName(u"A1"_ustr), u"TopBorderDistance"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testN793998, "n793998.docx") { xmlDocUniquePtr pXmlDoc = parseLayoutDump(); sal_Int32 nTextPortion = getXPath(pXmlDoc, "/root/page/body/txt/SwParaPortion/SwLineLayout/child::*[1]", "width").toInt32(); // Width of the first (text) portion sal_Int32 nTabPortion = getXPath(pXmlDoc, "/root/page/body/txt/SwParaPortion/SwLineLayout/child::*[2]", "width").toInt32(); // Width of the second (tab) portion sal_Int32 nParagraph = getXPath(pXmlDoc, "/root/page/body/txt/infos/bounds", "width").toInt32(); // Width of the paragraph sal_Int32 const nRightMargin = 3000; // The problem was that the tab portion didn't ignore the right margin, so text + tab width wasn't larger than body (paragraph - right margin) width. CPPUNIT_ASSERT(nTextPortion + nTabPortion > nParagraph - nRightMargin); } CPPUNIT_TEST_FIXTURE(Test, testN779642) { auto verify = [this]() { uno::Reference xTextTablesSupplier(mxComponent, uno::UNO_QUERY); // First problem: check that we have 2 tables, nesting caused the // creation of outer one to fail uno::Reference xTables(xTextTablesSupplier->getTextTables(), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL_MESSAGE("Wrong number of imported tables", sal_Int32(2), xTables->getCount()); // Second problem: check that the outer table is in a frame, at the bottom of the page uno::Reference xTextTable(xTextTablesSupplier->getTextTables()->getByName(u"Table2"_ustr), uno::UNO_QUERY); uno::Reference xAnchor(xTextTable->getAnchor(), uno::UNO_QUERY); cpo::uno::Any aFrame = xAnchor->getPropertyValue(u"TextFrame"_ustr); uno::Reference xFrame; aFrame >>= xFrame; CPPUNIT_ASSERT(xFrame.is()); sal_Int16 nValue; xFrame->getPropertyValue(u"VertOrient"_ustr) >>= nValue; CPPUNIT_ASSERT_EQUAL_MESSAGE("Wrong vertical orientation", text::VertOrientation::BOTTOM, nValue); xFrame->getPropertyValue(u"VertOrientRelation"_ustr) >>= nValue; CPPUNIT_ASSERT_EQUAL_MESSAGE("Wrong vertical orientation relation", text::RelOrientation::PAGE_PRINT_AREA, nValue); }; createSwDoc("n779642.docx"); verify(); saveAndReload(TestFilter::DOCX); verify(); } DECLARE_OOXMLEXPORT_TEST(testTbLrHeight, "tblr-height.docx") { uno::Reference xTextTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTextTablesSupplier->getTextTables(), uno::UNO_QUERY); uno::Reference xTable(xTables->getByIndex(0), uno::UNO_QUERY); uno::Reference xCell = xTable->getCellByName(u"B1"_ustr); CPPUNIT_ASSERT_EQUAL(text::WritingMode2::BT_LR, getProperty(xCell, u"WritingMode"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testBnc865381, "bnc865381.docx") { uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables(), uno::UNO_QUERY); uno::Reference xTextTable(xTables->getByIndex(0), uno::UNO_QUERY); uno::Reference xCell = xTextTable->getCellByName(u"A2"_ustr); CPPUNIT_ASSERT_EQUAL(text::WritingMode2::BT_LR, getProperty(xCell, u"WritingMode"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testFdo53985, "fdo53985.docx") { // Unhandled exception prevented import of the rest of the document. uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables( ), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(5), xTables->getCount()); // Only 4 tables were imported. SwDoc* pDoc = getSwDoc(); CPPUNIT_ASSERT_MESSAGE("Compatibility: Protect form", pDoc->getIDocumentSettingAccess().get( DocumentSettingId::PROTECT_FORM ) ); uno::Reference xTextSectionsSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xSections(xTextSectionsSupplier->getTextSections(), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(5), xSections->getCount()); // The first paragraph wasn't counted as a section. uno::Reference xSect(xSections->getByIndex(0), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL_MESSAGE("TextSection is protected", true, getProperty(xSect, u"IsProtected"_ustr)); xSect.set(xSections->getByIndex(3), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL_MESSAGE("Section3 is protected", false, getProperty(xSect, u"IsProtected"_ustr)); // This was increasing by 3 every round-trip - an extra paragraph after each table in sections CPPUNIT_ASSERT_EQUAL(6, getParagraphs()); } DECLARE_OOXMLEXPORT_TEST(testFdo59638, "fdo59638.docx") { // The problem was that w:lvlOverride inside w:num was ignores by dmapper. uno::Reference xPropertySet(getStyles(u"NumberingStyles"_ustr)->getByName(u"WWNum1"_ustr), uno::UNO_QUERY); uno::Reference xLevels(xPropertySet->getPropertyValue(u"NumberingRules"_ustr), uno::UNO_QUERY); cpo::uno::Sequence aProps; xLevels->getByIndex(0) >>= aProps; // 1st level for (beans::PropertyValue const& rProp : aProps) { if (rProp.Name == "BulletChar") { // Was '*', should be 'o'. CPPUNIT_ASSERT_EQUAL(u"\uF0B7"_ustr, rProp.Value.get()); return; } } CPPUNIT_FAIL("no BulletChar property"); } DECLARE_OOXMLEXPORT_TEST(testFdo61343, "fdo61343.docx") { // The problem was that there were a groupshape in the doc, followed by an // OLE object, and this lead to a crash. CPPUNIT_ASSERT_EQUAL(1, getShapes()); } DECLARE_OOXMLEXPORT_TEST(testToolsLineNumbering, "tools-line-numbering.docx") { /* * Test the line numbering feature import (Tools->Line Numbering ...) * * xray ThisComponent.getLineNumberingProperties().IsOn == True * xray ThisComponent.getLineNumberingProperties().CountEmptyLines == True * xray ThisComponent.getLineNumberingProperties().NumberPosition == 0 * xray ThisComponent.getLineNumberingProperties().NumberingType == 4 * xray ThisComponent.getLineNumberingProperties().SeparatorInterval == 3 */ bool bValue = false; sal_Int32 nValue = -1; uno::Reference< text::XTextDocument > xtextDocument(mxComponent, uno::UNO_QUERY); uno::Reference< text::XLineNumberingProperties > xLineProperties( xtextDocument, uno::UNO_QUERY_THROW ); uno::Reference< beans::XPropertySet > xPropertySet = xLineProperties->getLineNumberingProperties(); xPropertySet->getPropertyValue(u"IsOn"_ustr) >>= bValue; CPPUNIT_ASSERT_EQUAL(true, bValue); xPropertySet->getPropertyValue(u"CountEmptyLines"_ustr) >>= bValue; CPPUNIT_ASSERT_EQUAL(true, bValue); xPropertySet->getPropertyValue(u"NumberPosition"_ustr) >>= nValue; CPPUNIT_ASSERT_EQUAL(sal_Int32(0), nValue); xPropertySet->getPropertyValue(u"NumberingType"_ustr) >>= nValue; CPPUNIT_ASSERT_EQUAL(sal_Int32(4), nValue); xPropertySet->getPropertyValue(u"SeparatorInterval"_ustr) >>= nValue; CPPUNIT_ASSERT_EQUAL(sal_Int32(3), nValue); } DECLARE_OOXMLEXPORT_TEST(testfdo78904, "fdo78904.docx") { uno::Reference xTextFramesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xIndexAccess(xTextFramesSupplier->getTextFrames(), uno::UNO_QUERY); if (xIndexAccess->getCount()) { uno::Reference xFrame(xIndexAccess->getByIndex(0), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(oox::drawingml::convertEmuToHmm(0), getProperty(xFrame, u"HoriOrientPosition"_ustr)); } } DECLARE_OOXMLEXPORT_TEST(testFdo60922, "fdo60922.docx") { // This was 0, not 100, due to wrong import of w:position w:val="0" CPPUNIT_ASSERT_EQUAL(sal_Int32(100), getProperty(getRun(getParagraph(1), 1), u"CharEscapementHeight"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testFdo59273, "fdo59273.docx") { uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables( ), uno::UNO_QUERY); uno::Reference xTextTable(xTables->getByIndex(0), uno::UNO_QUERY); // Was 115596 (i.e. 10 times wider than necessary), as w:tblW was missing and the importer didn't set it. CPPUNIT_ASSERT_EQUAL(sal_Int32(12963), getProperty(xTextTable, u"Width"_ustr)); uno::Reference xTableRows = xTextTable->getRows(); // Was 9997, so the 4th column had ~zero width CPPUNIT_ASSERT_LESSEQUAL(2, (sal_Int16(7500) - getProperty>( xTableRows->getByIndex(0), u"TableColumnSeparators"_ustr)[2] .Position)); } DECLARE_OOXMLEXPORT_TEST(testConditionalstylesTablelook, "conditionalstyles-tbllook.docx") { uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables(), uno::UNO_QUERY); uno::Reference xTable(xTables->getByIndex(0), uno::UNO_QUERY); // Background was -1. CPPUNIT_ASSERT_EQUAL(Color(0x7F7F7F), getProperty(xTable->getCellByName(u"A1"_ustr), u"BackColor"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testFdo63685, "fdo63685.docx") { // An inline image's wrapping should be always zero, even if the doc model has a non-zero value. CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(getShape(1), u"TopMargin"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testN592908_Frame, "n592908-frame.docx") { uno::Reference xPropertySet(getShape(1), uno::UNO_QUERY); text::WrapTextMode eValue; xPropertySet->getPropertyValue(u"Surround"_ustr) >>= eValue; CPPUNIT_ASSERT_EQUAL(text::WrapTextMode_PARALLEL, eValue); } DECLARE_OOXMLEXPORT_TEST(testN592908_Picture, "n592908-picture.docx") { uno::Reference xPropertySet(getShape(1), uno::UNO_QUERY); text::WrapTextMode eValue; xPropertySet->getPropertyValue(u"Surround"_ustr) >>= eValue; CPPUNIT_ASSERT_EQUAL(text::WrapTextMode_PARALLEL, eValue); } DECLARE_OOXMLEXPORT_TEST(testN779630, "n779630.docx") { // A combo box is imported if (getShapes() > 0) { uno::Reference xControlShape(getShape(1), uno::UNO_QUERY); uno::Reference xPropertySet(xControlShape->getControl(), uno::UNO_QUERY); uno::Reference xServiceInfo(xPropertySet, uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(true, xServiceInfo->supportsService(u"com.sun.star.form.component.ComboBox"_ustr)); CPPUNIT_ASSERT_EQUAL(u"dropdown default text"_ustr, getProperty(xPropertySet, u"DefaultText"_ustr)); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), getProperty< cpo::uno::Sequence >(xPropertySet, u"StringItemList"_ustr).getLength()); CPPUNIT_ASSERT_EQUAL(true, getProperty(xPropertySet, u"Dropdown"_ustr)); } else { // Inline SDT: dropdown is imported as content control. uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables(), uno::UNO_QUERY); uno::Reference xTable(xTables->getByIndex(0), uno::UNO_QUERY); uno::Reference xCell = xTable->getCellByName(u"B1"_ustr); uno::Reference xParagraphsAccess(xCell, uno::UNO_QUERY); uno::Reference xParagraphs = xParagraphsAccess->createEnumeration(); uno::Reference xParagraph(xParagraphs->nextElement(), uno::UNO_QUERY); uno::Reference xPortions = xParagraph->createEnumeration(); // Label: xPortions->nextElement(); // Space: xPortions->nextElement(); // Default text: uno::Reference xTextPortion(xPortions->nextElement(), uno::UNO_QUERY); OUString aPortionType; xTextPortion->getPropertyValue(u"TextPortionType"_ustr) >>= aPortionType; CPPUNIT_ASSERT_EQUAL(u"ContentControl"_ustr, aPortionType); uno::Reference xContentControl; xTextPortion->getPropertyValue(u"ContentControl"_ustr) >>= xContentControl; uno::Reference xContentControlProps(xContentControl, uno::UNO_QUERY); cpo::uno::Sequence aListItems; xContentControlProps->getPropertyValue(u"ListItems"_ustr) >>= aListItems; CPPUNIT_ASSERT_EQUAL(static_cast(2), aListItems.getLength()); uno::Reference xContentEnumAccess(xContentControl, uno::UNO_QUERY); uno::Reference xContentEnum = xContentEnumAccess->createEnumeration(); uno::Reference xContent(xContentEnum->nextElement(), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(u"dropdown default text"_ustr, xContent->getString()); } } DECLARE_OOXMLEXPORT_TEST(testIndentation, "indentation.docx") { uno::Reference xParaLTRTitle(getParagraph( 1, u"Title aligned"_ustr)); uno::Reference xParaLTRNormal(getParagraph( 2, u""_ustr)); // this will test the text direction for paragraphs CPPUNIT_ASSERT_EQUAL(text::WritingMode2::LR_TB, getProperty( xParaLTRTitle, u"WritingMode"_ustr )); CPPUNIT_ASSERT_EQUAL(text::WritingMode2::LR_TB, getProperty( xParaLTRNormal, u"WritingMode"_ustr )); } DECLARE_OOXMLEXPORT_TEST(testPageBorderShadow, "page-border-shadow.docx") { // The problem was that in w:pgBorders, child elements had a w:shadow attribute, but that was ignored. table::ShadowFormat aShadow = getProperty(getStyles(u"PageStyles"_ustr)->getByName(u"Standard"_ustr), u"ShadowFormat"_ustr); CPPUNIT_ASSERT_EQUAL(COL_BLACK, Color(ColorTransparency, aShadow.Color)); CPPUNIT_ASSERT_EQUAL(table::ShadowLocation_BOTTOM_RIGHT, aShadow.Location); // w:sz="48" is in eights of a point, 1 pt is 20 twips. CPPUNIT_ASSERT_EQUAL(sal_Int16(convertTwipToMm100(48/8*20)), aShadow.ShadowWidth); } DECLARE_OOXMLEXPORT_TEST(testN816593, "n816593.docx") { // Two consecutive without any paragraph in between, but with different tblpPr. In this // case we need to have 2 different tables instead of 1 uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables( ), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), xTables->getCount()); } CPPUNIT_TEST_FIXTURE(Test, testN820509) { // M.d.yyyy date format was unhandled. createSwDoc("n820509.docx"); SwDoc* pDoc = getSwDoc(); IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), pMarkAccess->getAllMarksCount()); ::sw::mark::Fieldmark* pFieldmark = dynamic_cast<::sw::mark::Fieldmark*>(*pMarkAccess->getAllMarksBegin()); CPPUNIT_ASSERT(pFieldmark); CPPUNIT_ASSERT_EQUAL(ODF_FORMDATE, pFieldmark->GetFieldname()); const sw::mark::Fieldmark::parameter_map_t* const pParameters = pFieldmark->GetParameters(); OUString sDateFormat; auto pResult = pParameters->find(ODF_FORMDATE_DATEFORMAT); if (pResult != pParameters->end()) { pResult->second >>= sDateFormat; } CPPUNIT_ASSERT_EQUAL(u"M.d.yyyy"_ustr, sDateFormat); saveAndReload(TestFilter::DOCX); uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables(), uno::UNO_QUERY); uno::Reference xTable(xTables->getByIndex(0), uno::UNO_QUERY); uno::Reference xCell = xTable->getCellByName(u"A1"_ustr); uno::Reference xParagraphsAccess(xCell, uno::UNO_QUERY); uno::Reference xParagraphs = xParagraphsAccess->createEnumeration(); uno::Reference xParagraph(xParagraphs->nextElement(), uno::UNO_QUERY); uno::Reference xPortions = xParagraph->createEnumeration(); uno::Reference xTextPortion(xPortions->nextElement(), uno::UNO_QUERY); OUString aPortionType; xTextPortion->getPropertyValue(u"TextPortionType"_ustr) >>= aPortionType; CPPUNIT_ASSERT_EQUAL(u"ContentControl"_ustr, aPortionType); uno::Reference xContentControl; xTextPortion->getPropertyValue(u"ContentControl"_ustr) >>= xContentControl; uno::Reference xContentControlProps(xContentControl, uno::UNO_QUERY); bool bDate{}; xContentControlProps->getPropertyValue(u"Date"_ustr) >>= bDate; CPPUNIT_ASSERT(bDate); OUString aDateFormat; xContentControlProps->getPropertyValue(u"DateFormat"_ustr) >>= aDateFormat; CPPUNIT_ASSERT_EQUAL(u"M.d.yyyy"_ustr, aDateFormat); } DECLARE_OOXMLEXPORT_TEST(testTdf151548_activeContentDemo, "tdf151548_activeContentDemo.docm") { SwDoc* pDoc = getSwDoc(); IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); for(auto aIter = pMarkAccess->getFieldmarksBegin(); aIter != pMarkAccess->getFieldmarksEnd(); ++aIter) { const SwMarkName sName = (*aIter)->GetName(); CPPUNIT_ASSERT(sName == u"Check1"_ustr || sName == u"Text1"_ustr || sName == u"Dropdown1"_ustr); } } DECLARE_OOXMLEXPORT_TEST(testN830205, "n830205.docx") { //FIXME: validation error in OOXML export: Errors: 180 skipValidation(); // Previously import just crashed (due to infinite recursion). getParagraph(1, u"XXX"_ustr); } DECLARE_OOXMLEXPORT_TEST(tdf123705, "tdf123705.docx") { //FIXME: validation error in OOXML export: Errors: 29 skipValidation(); } DECLARE_OOXMLEXPORT_TEST(testTableAutoColumnFixedSize, "table-auto-column-fixed-size.docx") { uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables(), uno::UNO_QUERY); uno::Reference xTextTable(xTables->getByIndex(0), uno::UNO_QUERY); // Width was not recognized during import when table size was 'auto' CPPUNIT_ASSERT_EQUAL(sal_Int32(convertTwipToMm100(3996)), getProperty(xTextTable, u"Width"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTableAutoColumnFixedSize2, "table-auto-column-fixed-size2.docx") { uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables(), uno::UNO_QUERY); uno::Reference xTextTable(xTables->getByIndex(0), uno::UNO_QUERY); // This was 17907, i.e. the sum of the width of the 3 cells (10152 twips each), which is too wide. CPPUNIT_ASSERT_EQUAL(sal_Int32(16891), getProperty(xTextTable, u"Width"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testFdo46361, "fdo46361.docx") { uno::Reference xGroupShape(getShape(1), uno::UNO_QUERY); uno::Reference xTextBox; // FIXME: // uno::Reference xShape(xGroupShape->getByIndex(0), uno::UNO_QUERY); // CPPUNIT_ASSERT_EQUAL(drawing::TextVerticalAdjust_TOP, getProperty(xShape, "TextVerticalAdjust")); // This was CENTER xTextBox.set(xGroupShape->getByIndex(0), uno::UNO_QUERY_THROW); CPPUNIT_ASSERT_EQUAL(style::ParagraphAdjust_CENTER, static_cast(getProperty( getParagraphOfText(1, xTextBox->getText()), u"ParaAdjust"_ustr))); // This was BLACK CPPUNIT_ASSERT_EQUAL(COL_GREEN, getProperty(getRun(getParagraphOfText(1, xTextBox->getText()), 1), u"CharColor"_ustr)); // Count the paragraphs xTextBox.set(xGroupShape->getByIndex(1), uno::UNO_QUERY_THROW); const auto sText1 = xTextBox->getString(); xTextBox.set(xGroupShape->getByIndex(2), uno::UNO_QUERY_THROW); const auto sText2 = xTextBox->getString(); sal_Int32 nCount1 = 0; sal_Int32 nCount2 = 0; for (sal_Int32 i = 0; i < sText1.getLength(); i++) if (sText1[i] == '\n') nCount1++; for (sal_Int32 i = 0; i < sText2.getLength(); i++) if (sText2[i] == '\n') nCount2++; CPPUNIT_ASSERT_EQUAL(sal_Int32(1), nCount1); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), nCount2); // This was CENTER CPPUNIT_ASSERT_EQUAL(style::ParagraphAdjust_CENTER, static_cast(getProperty( getParagraphOfText(2, xTextBox->getText(), u"text"_ustr), u"ParaAdjust"_ustr))); // This must not be left. CPPUNIT_ASSERT_MESSAGE("You FIXED me!", style::ParagraphAdjust_LEFT != static_cast(getProperty( getParagraphOfText(3, xTextBox->getText(), u""_ustr), u"ParaAdjust"_ustr))); } DECLARE_OOXMLEXPORT_TEST(testFdo65632, "fdo65632.docx") { // The problem was that the footnote text had fake redline: only the body // text has redline in fact. uno::Reference xFootnotesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xFootnotes = xFootnotesSupplier->getFootnotes(); uno::Reference xText(xFootnotes->getByIndex(0), uno::UNO_QUERY); //uno::Reference xParagraph = getParagraphOfText(1, xText); CPPUNIT_ASSERT_EQUAL(u"Text"_ustr, getProperty(getRun(getParagraphOfText(1, xText), 1), u"TextPortionType"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testFdo66474, "fdo66474.docx") { // The table width was too small, so the text in the second cell was unreadable: this was 1397. uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables( ), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(10492), getProperty(xTables->getByIndex(0), u"Width"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testGroupshapeRotation, "groupshape-rotation.docx") { // Rotation on groupshapes wasn't handled at all by the VML importer. // Note: the shapes are still shifting on the page, so the rotation drifts after multiple round-trips. CPPUNIT_ASSERT_DOUBLES_EQUAL(31500.0, getProperty(getShape(1), u"RotateAngle"_ustr), 100); } DECLARE_OOXMLEXPORT_TEST(testBnc780044Spacing, "bnc780044_spacing.docx") { // The document has global w:spacing in styles.xml , and local w:spacing in w:pPr, which however // only applied to text runs, not to as-character pictures. So the picture made the line higher. CPPUNIT_ASSERT_EQUAL(1, getPages()); } DECLARE_OOXMLEXPORT_TEST(testTableAutoNested, "table-auto-nested.docx") { // This was 176, when compat option is not enabled, the auto paragraph bottom margin value was incorrect. CPPUNIT_ASSERT_EQUAL(sal_Int32(494), getProperty(getParagraph(1), u"ParaBottomMargin"_ustr)); uno::Reference xTablesSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xTables(xTablesSupplier->getTextTables(), uno::UNO_QUERY); // This was 115596, i.e. the width of the outer table was too large. CPPUNIT_ASSERT_EQUAL(sal_Int32(23051), getProperty(xTables->getByIndex(1), u"Width"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTableStyleParprop, "table-style-parprop.docx") { // The problem was that w:spacing's w:after=0 (a paragraph property) wasn't imported from table style. uno::Reference xTable(getParagraphOrTable(1), uno::UNO_QUERY); uno::Reference xCell(xTable->getCellByName(u"A1"_ustr), uno::UNO_QUERY); // This was 353, the document default, i.e. paragraph property from table style had no effect. CPPUNIT_ASSERT_EQUAL(sal_Int32(0), getProperty(getParagraphOfText(1, xCell->getText()), u"ParaBottomMargin"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testTablePagebreak, "table-pagebreak.docx") { // Page break inside table: should be ignored (was style::BreakType_PAGE_BEFORE before). CPPUNIT_ASSERT_EQUAL(style::BreakType_NONE, getProperty(getParagraphOrTable(2), u"BreakType"_ustr)); // This one is outside the table: should not be ignored. CPPUNIT_ASSERT_EQUAL(style::BreakType_PAGE_BEFORE, getProperty(getParagraph(3), u"BreakType"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testFdo68607, "fdo68607.docx") { // Bugdoc was 8 pages in Word, 1 in Writer due to pointlessly wrapping the // table in a frame. Exact layout may depend on fonts available, etc. -- // but at least make sure that our table spans over multiple pages now. CPPUNIT_ASSERT(getPages() > 1); } DECLARE_OOXMLEXPORT_TEST(testVmlTextVerticalAdjust, "vml-text-vertical-adjust.docx") { uno::Reference xOuterGroupShape(getShape(1), uno::UNO_QUERY); uno::Reference xInnerGroupShape(xOuterGroupShape->getByIndex(0), uno::UNO_QUERY); uno::Reference xShape(xInnerGroupShape->getByIndex(0), uno::UNO_QUERY); // Was CENTER. CPPUNIT_ASSERT_EQUAL(drawing::TextVerticalAdjust_TOP, getProperty(xShape, u"TextVerticalAdjust"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testFdo69636, "fdo69636.docx") { // The problem was that the mso-layout-flow-alt:bottom-to-top VML shape property wasn't handled for sw text frames. // Note: VML is no longer used on import. OOXML import uses WritingMode2::BT_LR now. uno::Reference xPropertySet(getShape(1), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int16(text::WritingMode2::BT_LR), getProperty(xPropertySet, u"WritingMode"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testChartProp, "chart-prop.docx") { // The problem was that chart was not getting parsed in writer module. CPPUNIT_ASSERT_EQUAL(1, getShapes()); uno::Reference xPropertySet(getShape(1), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(sal_Int32(15240), getProperty(xPropertySet, u"Width"_ustr)); CPPUNIT_ASSERT_EQUAL(sal_Int32(8890), getProperty(xPropertySet, u"Height"_ustr)); } DECLARE_OOXMLEXPORT_TEST(testFdo43093, "fdo43093b.docx") { // The problem was that the direction and alignment are not correct for RTL paragraphs. uno::Reference xParaRtlRight(getParagraph( 1, u"Right and RTL in M$"_ustr)); sal_Int32 nRtlRight = getProperty< sal_Int32 >( xParaRtlRight, u"ParaAdjust"_ustr ); sal_Int16 nRRDir = getProperty< sal_Int32 >( xParaRtlRight, u"WritingMode"_ustr ); uno::Reference xParaRtlLeft(getParagraph( 2, u"Left and RTL in M$"_ustr)); sal_Int32 nRtlLeft = getProperty< sal_Int32 >( xParaRtlLeft, u"ParaAdjust"_ustr ); sal_Int16 nRLDir = getProperty< sal_Int32 >( xParaRtlLeft, u"WritingMode"_ustr ); uno::Reference xParaLtrRight(getParagraph( 3, u"Right and LTR in M$"_ustr)); sal_Int32 nLtrRight = getProperty< sal_Int32 >( xParaLtrRight, u"ParaAdjust"_ustr ); sal_Int16 nLRDir = getProperty< sal_Int32 >( xParaLtrRight, u"WritingMode"_ustr ); uno::Reference xParaLtrLeft(getParagraph( 4, u"Left and LTR in M$"_ustr)); sal_Int32 nLtrLeft = getProperty< sal_Int32 >( xParaLtrLeft, u"ParaAdjust"_ustr ); sal_Int16 nLLDir = getProperty< sal_Int32 >( xParaLtrLeft, u"WritingMode"_ustr ); // this will test the both the text direction and alignment for each paragraph CPPUNIT_ASSERT_EQUAL( sal_Int32 (style::ParagraphAdjust_RIGHT), nRtlRight); CPPUNIT_ASSERT_EQUAL(text::WritingMode2::RL_TB, nRRDir); CPPUNIT_ASSERT_EQUAL( sal_Int32 (style::ParagraphAdjust_LEFT), nRtlLeft); CPPUNIT_ASSERT_EQUAL(text::WritingMode2::RL_TB, nRLDir); CPPUNIT_ASSERT_EQUAL( sal_Int32 (style::ParagraphAdjust_RIGHT), nLtrRight); CPPUNIT_ASSERT_EQUAL(text::WritingMode2::LR_TB, nLRDir); CPPUNIT_ASSERT_EQUAL( sal_Int32 (style::ParagraphAdjust_LEFT), nLtrLeft); CPPUNIT_ASSERT_EQUAL(text::WritingMode2::LR_TB, nLLDir); } CPPUNIT_PLUGIN_IMPLEMENT(); /* vim:set shiftwidth=4 softtabstop=4 expandtab: */