/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ /* * This file is part of the Collabora Office project. * * This Source Code Form is subject to the terms of the Mozilla Public * License, v. 2.0. If a copy of the MPL was not distributed with this * file, You can obtain one at http://mozilla.org/MPL/2.0/. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include using namespace css; using namespace css::uno; namespace { void lcl_selectCharacters(SwPaM& rPaM, sal_Int32 first, sal_Int32 end) { rPaM.GetPoint()->nContent.Assign(rPaM.GetPointContentNode(), first); rPaM.SetMark(); rPaM.GetPoint()->nContent.Assign(rPaM.GetPointContentNode(), end); } } //namespace class SwUiWriterTest4 : public SwModelTestBase { public: SwUiWriterTest4() : SwModelTestBase(u"/sw/qa/extras/uiwriter/data/"_ustr) { } void mergeDocs(const char* aDestDoc, const char* aInsertDoc); }; void SwUiWriterTest4::mergeDocs(const char* aDestDoc, const char* aInsertDoc) { createSwDoc(aDestDoc); // set a page cursor into the end of the document uno::Reference xModel(mxComponent, uno::UNO_QUERY); uno::Reference xTextViewCursorSupplier( xModel->getCurrentController(), uno::UNO_QUERY); uno::Reference xCursor(xTextViewCursorSupplier->getViewCursor(), uno::UNO_QUERY); xCursor->jumpToEndOfPage(); // insert the same document at current cursor position { const OUString insertFileid = createFileURL(OUString::createFromAscii(aInsertDoc)); cpo::uno::Sequence aPropertyValues( comphelper::InitPropertySequence({ { "Name", cpo::uno::Any(insertFileid) } })); dispatchCommand(mxComponent, u".uno:InsertDoc"_ustr, aPropertyValues); } } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf96515) { // Enable hide whitespace mode. createSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); SwViewOption aViewOptions(*pWrtShell->GetViewOptions()); aViewOptions.SetHideWhitespaceMode(true); pWrtShell->ApplyViewOptions(aViewOptions); CPPUNIT_ASSERT(pWrtShell->GetViewOptions()->IsWhitespaceHidden()); // Insert a new paragraph at the end of the document. uno::Reference xTextDocument(mxComponent, uno::UNO_QUERY); uno::Reference xParagraphAppend(xTextDocument->getText(), uno::UNO_QUERY); xParagraphAppend->finishParagraph(cpo::uno::Sequence()); calcLayout(); // This was 2, a new page was created for the new paragraph. CPPUNIT_ASSERT_EQUAL(1, getPages()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf98446_switch_to_single_page_on_hide_whitespace) { createSwDoc(); SwDocShell* pDocShell = getSwDocShell(); SwWrtShell* pWrtShell = pDocShell->GetWrtShell(); SwView* pView = pDocShell->GetView(); // Enable hide whitespace view mode SwViewOption aViewOptions(*pWrtShell->GetViewOptions()); aViewOptions.SetHideWhitespaceMode(true); pWrtShell->ApplyViewOptions(aViewOptions); CPPUNIT_ASSERT(pWrtShell->GetViewOptions()->IsWhitespaceHidden()); // --- Case 1: Multiple pages per row ------------------------------------- // Switch to multiple pages per row dispatchCommand(mxComponent, u".uno:MultiplePagesPerRow"_ustr, {}); // Without the fix in place, this test would have failed with // - Expected: Switching back to single-page layout when hiding whitespace // - Actual : Layout remained in multi-column mode CPPUNIT_ASSERT(!pWrtShell->GetViewOptions()->IsWhitespaceHidden()); // Re-apply hide whitespace in multi-column mode pWrtShell->ApplyViewOptions(aViewOptions); // Without the fix in place, this test would have failed with // - Expected: Switching back to single-page layout when hiding whitespace // - Actual : Layout remained in multi-column mode CPPUNIT_ASSERT(!pWrtShell->GetViewOptions()->IsViewLayoutBookMode()); CPPUNIT_ASSERT_EQUAL(sal_uInt16(1), pWrtShell->GetViewOptions()->GetViewLayoutColumns()); // --- Case 2: Book mode -------------------------------------------------- dispatchCommand(mxComponent, u".uno:BookView"_ustr, {}); // Without the fix in place, this test would have failed with // - Expected: Switching back to single-page layout when hiding whitespace // - Actual : Layout remained in book mode CPPUNIT_ASSERT(!pWrtShell->GetViewOptions()->IsWhitespaceHidden()); // Re-apply hide whitespace in multi-column mode pWrtShell->ApplyViewOptions(aViewOptions); // Without the fix in place, this test would have failed with // - Expected: Switching back to single-page layout when hiding whitespace // - Actual : Layout remained in book mode CPPUNIT_ASSERT(!pWrtShell->GetViewOptions()->IsViewLayoutBookMode()); CPPUNIT_ASSERT_EQUAL(sal_uInt16(1), pWrtShell->GetViewOptions()->GetViewLayoutColumns()); // --- Case 3: Manual layout changes -------------------------------------- // Without the fix in place, this test would have failed with // - Expected: Multi-column layout disables whitespace hiding // - Actual : Whitespace remained hidden in multi-column mode pView->SetViewLayout(/*nColumns=*/0, /*bBookMode=*/false); CPPUNIT_ASSERT(!pWrtShell->GetViewOptions()->IsWhitespaceHidden()); // Without the fix in place, this test would have failed with // - Expected: Multi-column layout disables whitespace hiding // - Actual : Whitespace remained hidden in multi-column mode pView->SetViewLayout(/*nColumns=*/2, /*bBookMode=*/true); CPPUNIT_ASSERT(!pWrtShell->GetViewOptions()->IsWhitespaceHidden()); } static OUString lcl_translitTest(SwDoc& rDoc, const SwPaM& rPaM, TransliterationFlags const nType) { utl::TransliterationWrapper aTrans(::comphelper::getProcessComponentContext(), nType); rDoc.getIDocumentContentOperations().TransliterateText(rPaM, aTrans); //SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); return rPaM.GetMarkNode().GetTextNode()->GetText(); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf146449) { createSwDoc("tdf146449.odt"); auto pShell = getSwDocShell()->GetFEShell(); CPPUNIT_ASSERT(pShell); auto xTextBox = getShapeByName(u"Frame1"); auto pObject = SdrObject::getSdrObjectFromXShape(xTextBox); CPPUNIT_ASSERT(pShell->SelectObj(Point(), 0, pObject)); dispatchCommand(mxComponent, u".uno:Cut"_ustr, {}); dispatchCommand(mxComponent, u".uno:Undo"_ustr, {}); uno::Reference xShapeProps(xTextBox, uno::UNO_QUERY); uno::Reference xFrameProps( xShapeProps->getPropertyValue(u"TextBoxContent"_ustr), uno::UNO_QUERY); const auto nShapeZOrder = pObject->GetOrdNum(); const auto nFrameZOrder = xFrameProps->getPropertyValue(u"ZOrder"_ustr); CPPUNIT_ASSERT_MESSAGE("Wrong Zorder!", nShapeZOrder < nFrameZOrder.get()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf49033) { createSwDoc(); SwDoc* pDoc = getSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); // Insert the test text at the end of the document. pWrtShell->SttEndDoc(/*bStt=*/false); pWrtShell->Insert(u"Mary Jones met joe Smith. Time Passed."_ustr); pWrtShell->StartOfSection(); SwShellCursor* pCursor = pWrtShell->getShellCursor(false); using TF = TransliterationFlags; /* -- Test behavior when there is no selection -- */ /* Move cursor between the 't' and the ' ' after 'met', nothing should change */ for (int i = 0; i < 14; i++) pCursor->Move(fnMoveForward); CPPUNIT_ASSERT_EQUAL(false, pCursor->HasMark()); CPPUNIT_ASSERT_EQUAL(false, pWrtShell->IsSelection()); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); /* Move cursor between the 'h' and the '.' after 'Smith', nothing should change */ for (int i = 0; i < 10; i++) pCursor->Move(fnMoveForward); CPPUNIT_ASSERT_EQUAL(false, pCursor->HasMark()); CPPUNIT_ASSERT_EQUAL(false, pWrtShell->IsSelection()); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); /* Move cursor between the 'm' and the 'e' in 'met' */ for (int i = 0; i < 12; i++) pCursor->Move(fnMoveBackward); CPPUNIT_ASSERT_EQUAL(false, pCursor->HasMark()); CPPUNIT_ASSERT_EQUAL(false, pWrtShell->IsSelection()); CPPUNIT_ASSERT_EQUAL(u"Mary jones met joe smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); /* Undo the sentence case change to reset for the following tests */ pDoc->GetIDocumentUndoRedo().Undo(); CPPUNIT_ASSERT_EQUAL(u"Mary Jones Met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones MET joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); /* -- Test behavior when there is a selection that does not cross a word boundary -- */ pCursor->Move(fnMoveBackward); pWrtShell->SelWrd(); CPPUNIT_ASSERT_EQUAL(true, pCursor->HasMark()); CPPUNIT_ASSERT_EQUAL(true, pWrtShell->IsSelection()); OUString currentSelectedText; pWrtShell->GetSelectedText(currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"met"_ustr, currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"Mary Jones Met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones Met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones MET joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); /* -- Test behavior when there is a selection that does not begin at a word boundary: "et" -- */ for (int i = 0; i < 2; i++) pCursor->Move(fnMoveBackward); pCursor->SetMark(); for (int i = 0; i < 2; i++) pCursor->Move(fnMoveForward); pWrtShell->GetSelectedText(currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"et"_ustr, currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"Mary Jones mEt joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); pDoc->GetIDocumentUndoRedo().Undo(); CPPUNIT_ASSERT_EQUAL(u"et"_ustr, currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"Mary Jones mEt joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); pDoc->GetIDocumentUndoRedo().Undo(); CPPUNIT_ASSERT_EQUAL(u"et"_ustr, currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"Mary Jones mET joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); /* -- Test behavior when there is a selection that crosses a word boundary -- */ for (int i = 0; i < 7; i++) pCursor->Move(fnMoveBackward); pCursor->SetMark(); for (int i = 0; i < 14; i++) pCursor->Move(fnMoveForward); pWrtShell->GetSelectedText(currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"nes met joe Sm"_ustr, currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"Mary JoNes met joe smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); CPPUNIT_ASSERT_EQUAL(u"Mary JoNes Met Joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u"Mary JoNES MET JOE SMith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); /* Reset the 's' to upper-case for the next test */ for (int i = 0; i < 2; i++) pCursor->Move(fnMoveBackward); pCursor->SetMark(); pCursor->Move(fnMoveForward); pDoc->getIDocumentContentOperations().ReplaceRange(*pCursor, OUString('S'), false); /* -- Test behavior when there is a selection that crosses a sentence boundary -- */ for (int i = 0; i < 4; i++) pCursor->Move(fnMoveBackward); pCursor->SetMark(); for (int i = 0; i < 22; i++) pCursor->Move(fnMoveForward); pWrtShell->GetSelectedText(currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"joe Smith. Time Passed"_ustr, currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met Joe smith. Time passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); /* Undo the sentence case change to reset for the following tests */ pDoc->GetIDocumentUndoRedo().Undo(); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met Joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met JOE SMITH. TIME PASSED."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe smith. time passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); /* Undo the previous changes to reset for the following tests */ pDoc->GetIDocumentUndoRedo().Undo(); pDoc->GetIDocumentUndoRedo().Undo(); pDoc->GetIDocumentUndoRedo().Undo(); /* -- Test behavior when there is a selection that does not reach end of sentence -- */ for (int i = 0; i < 37; i++) pCursor->Move(fnMoveBackward); pCursor->SetMark(); for (int i = 0; i < 10; i++) pCursor->Move(fnMoveForward); pWrtShell->GetSelectedText(currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"Mary Jones"_ustr, currentSelectedText); CPPUNIT_ASSERT_EQUAL(u"Mary jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); CPPUNIT_ASSERT_EQUAL(u"Mary Jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u"MARY JONES met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u"mary jones met joe Smith. Time Passed."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf147196) { using TF = TransliterationFlags; createSwDoc(); SwDoc* pDoc = getSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); // Insert the test text at the end of the document. pWrtShell->SttEndDoc(/*bStt=*/false); pWrtShell->Insert( u"2.2 Publication of information - CAA\nSection 4.2 of a CA\'s Certificate Policy and/or " "Certification Practice Statement SHALL state the CA\'s policy or practice on processing " "CAA Records for Fully Qualified Domain Names; that policy shall be consistent with these " "Requirements. \n\nIt shall clearly specify the set of Issuer Domain Names that the CA " "recognises in CAA \"issue\" or \"issuewild\" records as permitting it to issue. The CA " "SHALL log all actions taken, if any, consistent with its processing practice."_ustr); pWrtShell->StartOfSection(); SwShellCursor* pCursor = pWrtShell->getShellCursor(false); pCursor->SetMark(); for (int i = 0; i < 510; i++) { pCursor->Move(fnMoveForward); } CPPUNIT_ASSERT_EQUAL( u"2.2 Publication Of Information - Caa\nSection 4.2 Of A Ca\'s Certificate Policy " "And/Or Certification Practice Statement Shall State The Ca\'s Policy Or Practice " "On Processing Caa Records For Fully Qualified Domain Names; That Policy Shall Be " "Consistent With These Requirements. \n\nIt Shall Clearly Specify The Set Of " "Issuer Domain Names That The Ca Recognises In Caa \"Issue\" Or \"Issuewild\" " "Records As Permitting It To Issue. The Ca Shall Log All Actions Taken, If Any, " "Consistent With Its Processing Practice."_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf148148) { using TF = TransliterationFlags; createSwDoc(); SwDoc* pDoc = getSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); pWrtShell->SttEndDoc(/*bStt=*/false); pWrtShell->Insert(u" text"_ustr); /* Test what happens when node contains text but selection does not contain any text */ pWrtShell->StartOfSection(); SwShellCursor* pCursor = pWrtShell->getShellCursor(false); pCursor->SetMark(); for (int i = 0; i < 3; i++) { pCursor->Move(fnMoveForward); } CPPUNIT_ASSERT_EQUAL(u" text"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u" text"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); CPPUNIT_ASSERT_EQUAL(u" text"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u" text"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); /* Test what happens when node contains text but selection does not contain any text */ createSwDoc(); pDoc = getSwDoc(); pWrtShell = getSwDocShell()->GetWrtShell(); pWrtShell->SttEndDoc(/*bStt=*/false); pWrtShell->Insert(u"text "_ustr); pWrtShell->StartOfSection(); pCursor = pWrtShell->getShellCursor(false); for (int i = 0; i < 4; i++) { pCursor->Move(fnMoveForward); } pCursor->SetMark(); for (int i = 0; i < 2; i++) { pCursor->Move(fnMoveForward); } CPPUNIT_ASSERT_EQUAL(u"text "_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); CPPUNIT_ASSERT_EQUAL(u"text "_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u"text "_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u"text "_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); /* Test what happens when node contains only non-word text but selection does not contain any text */ createSwDoc(); pDoc = getSwDoc(); pWrtShell = getSwDocShell()->GetWrtShell(); pWrtShell->SttEndDoc(/*bStt=*/false); pWrtShell->Insert(u"-1 "_ustr); pWrtShell->StartOfSection(); pCursor = pWrtShell->getShellCursor(false); for (int i = 0; i < 2; i++) { pCursor->Move(fnMoveForward); } pCursor->SetMark(); for (int i = 0; i < 2; i++) { pCursor->Move(fnMoveForward); } CPPUNIT_ASSERT_EQUAL(u"-1 "_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); CPPUNIT_ASSERT_EQUAL(u"-1 "_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u"-1 "_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u"-1 "_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); createSwDoc(); pDoc = getSwDoc(); pWrtShell = getSwDocShell()->GetWrtShell(); pWrtShell->SttEndDoc(/*bStt=*/false); pWrtShell->Insert(u" -1"_ustr); pWrtShell->StartOfSection(); pCursor = pWrtShell->getShellCursor(false); pCursor->SetMark(); for (int i = 0; i < 2; i++) { pCursor->Move(fnMoveForward); } CPPUNIT_ASSERT_EQUAL(u" -1"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); CPPUNIT_ASSERT_EQUAL(u" -1"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u" -1"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u" -1"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); /* Test what happens when node and selection contains only non-word text */ createSwDoc(); pDoc = getSwDoc(); pWrtShell = getSwDocShell()->GetWrtShell(); pWrtShell->SttEndDoc(/*bStt=*/false); pWrtShell->Insert(u" -1"_ustr); pWrtShell->StartOfSection(); pCursor = pWrtShell->getShellCursor(false); pCursor->SetMark(); for (int i = 0; i < 5; i++) { pCursor->Move(fnMoveForward); } CPPUNIT_ASSERT_EQUAL(u" -1"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::SENTENCE_CASE)); CPPUNIT_ASSERT_EQUAL(u" -1"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::TITLE_CASE)); CPPUNIT_ASSERT_EQUAL(u" -1"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::LOWERCASE_UPPERCASE)); CPPUNIT_ASSERT_EQUAL(u" -1"_ustr, lcl_translitTest(*pDoc, *pCursor, TF::UPPERCASE_LOWERCASE)); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf96943) { // Enable hide whitespace mode. createSwDoc("tdf96943.odt"); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); SwViewOption aViewOptions(*pWrtShell->GetViewOptions()); aViewOptions.SetHideWhitespaceMode(true); pWrtShell->ApplyViewOptions(aViewOptions); // Insert a new character at the end of the document. pWrtShell->SttEndDoc(/*bStt=*/false); pWrtShell->Insert(u"d"_ustr); // This was 2, a new page was created for the new layout line. CPPUNIT_ASSERT_EQUAL(1, getPages()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf96536) { // Enable hide whitespace mode. createSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); SwViewOption aViewOptions(*pWrtShell->GetViewOptions()); aViewOptions.SetHideWhitespaceMode(true); pWrtShell->ApplyViewOptions(aViewOptions); CPPUNIT_ASSERT(pWrtShell->GetViewOptions()->IsWhitespaceHidden()); // Insert a page break and go back to the first page. pWrtShell->InsertPageBreak(); pWrtShell->SttEndDoc(/*bStt=*/true); calcLayout(); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); sal_Int32 nSingleParaPageHeight = getXPath(pXmlDoc, "/root/page[1]/infos/bounds", "height").toInt32(); // Insert a 2nd paragraph at the end of the first page, so the page height grows at least twice... uno::Reference xTextDocument(mxComponent, uno::UNO_QUERY); uno::Reference xParagraphAppend(xTextDocument->getText(), uno::UNO_QUERY); const uno::Reference xInsertPos = getRun(getParagraph(1), 1); xParagraphAppend->finishParagraphInsert(cpo::uno::Sequence(), xInsertPos); calcLayout(); pXmlDoc = parseLayoutDump(); CPPUNIT_ASSERT(getXPath(pXmlDoc, "/root/page[1]/infos/bounds", "height").toInt32() >= 2 * nSingleParaPageHeight); // ... and then delete the 2nd paragraph, which shrinks the page to the previous size. uno::Reference xParagraph(getParagraph(2), uno::UNO_QUERY); xParagraph->dispose(); calcLayout(); pXmlDoc = parseLayoutDump(); CPPUNIT_ASSERT_EQUAL(nSingleParaPageHeight, getXPath(pXmlDoc, "/root/page[1]/infos/bounds", "height").toInt32()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf96479) { // We want to verify the empty input text field in the bookmark static const OUString emptyInputTextField = OUStringChar(CH_TXT_ATR_INPUTFIELDSTART) + OUStringChar(CH_TXT_ATR_INPUTFIELDEND); createSwDoc(); SwDoc* pDoc = getSwDoc(); // So we can clean up all references for reload { // Append bookmark SwNodeIndex aIdx(pDoc->GetNodes().GetEndOfContent(), -1); SwPaM aPaM(aIdx); IDocumentMarkAccess& rIDMA = *pDoc->getIDocumentMarkAccess(); sw::mark::MarkBase* pMark = rIDMA.makeMark(aPaM, SwMarkName(u"original"_ustr), IDocumentMarkAccess::MarkType::BOOKMARK, ::sw::mark::InsertMode::New); CPPUNIT_ASSERT(!pMark->IsExpanded()); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), rIDMA.getBookmarksCount()); // Get helper objects uno::Reference xBookmarksSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xFactory(mxComponent, uno::UNO_QUERY); // Create cursor from bookmark uno::Reference xTextContent( xBookmarksSupplier->getBookmarks()->getByName(u"original"_ustr), uno::UNO_QUERY); uno::Reference xRange = xTextContent->getAnchor(); uno::Reference xCursor = xRange->getText()->createTextCursorByRange(xRange); CPPUNIT_ASSERT(xCursor->isCollapsed()); // Remove bookmark xRange->getText()->removeTextContent(xTextContent); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), rIDMA.getBookmarksCount()); // Insert replacement bookmark uno::Reference xBookmarkNew( xFactory->createInstance(u"com.sun.star.text.Bookmark"_ustr), uno::UNO_QUERY); uno::Reference xBookmarkName(xBookmarkNew, uno::UNO_QUERY); xBookmarkName->setName(u"replacement"_ustr); CPPUNIT_ASSERT(xCursor->isCollapsed()); // Force bookmark expansion xCursor->getText()->insertString(xCursor, u"."_ustr, true); xCursor->getText()->insertTextContent(xCursor, xBookmarkNew, true); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), rIDMA.getBookmarksCount()); auto mark = *(rIDMA.getBookmarksBegin()); CPPUNIT_ASSERT(mark->IsExpanded()); // Create and insert input textfield with some content uno::Reference xTextField( xFactory->createInstance(u"com.sun.star.text.TextField.Input"_ustr), uno::UNO_QUERY); uno::Reference xCursorNew( xBookmarkNew->getAnchor()->getText()->createTextCursorByRange( xBookmarkNew->getAnchor())); CPPUNIT_ASSERT(!xCursorNew->isCollapsed()); xCursorNew->getText()->insertTextContent(xCursorNew, xTextField, true); xBookmarkNew = uno::Reference( xBookmarksSupplier->getBookmarks()->getByName(u"replacement"_ustr), uno::UNO_QUERY); xCursorNew = xBookmarkNew->getAnchor()->getText()->createTextCursorByRange( xBookmarkNew->getAnchor()); CPPUNIT_ASSERT(!xCursorNew->isCollapsed()); // Can't check the actual content of the text node via UNO mark = *(rIDMA.getBookmarksBegin()); CPPUNIT_ASSERT(mark->IsExpanded()); SwPaM pam(mark->GetMarkStart(), mark->GetMarkEnd()); // Check for the actual bug, which didn't include CH_TXT_ATR_INPUTFIELDEND in the bookmark CPPUNIT_ASSERT_EQUAL(emptyInputTextField, pam.GetText()); } { // Save and load cycle // Actually not needed, but the bug symptom of a missing bookmark // occurred because a broken bookmark was saved and loading silently // dropped the broken bookmark! saveAndReload(TestFilter::ODT); pDoc = getSwDoc(); // Lookup "replacement" bookmark IDocumentMarkAccess& rIDMA = *pDoc->getIDocumentMarkAccess(); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), rIDMA.getBookmarksCount()); uno::Reference xBookmarksSupplier(mxComponent, uno::UNO_QUERY); CPPUNIT_ASSERT(xBookmarksSupplier->getBookmarks()->hasByName(u"replacement"_ustr)); uno::Reference xTextContent( xBookmarksSupplier->getBookmarks()->getByName(u"replacement"_ustr), uno::UNO_QUERY); uno::Reference xRange = xTextContent->getAnchor(); uno::Reference xCursor = xRange->getText()->createTextCursorByRange(xRange); CPPUNIT_ASSERT(!xCursor->isCollapsed()); // Verify bookmark content via text node / PaM auto mark = *(rIDMA.getBookmarksBegin()); CPPUNIT_ASSERT(mark->IsExpanded()); SwPaM pam(mark->GetMarkStart(), mark->GetMarkEnd()); CPPUNIT_ASSERT_EQUAL(emptyInputTextField, pam.GetText()); } } // If you resave original document the bookmark will be changed from // // // // // def // // // to // // // // def // // CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testBookmarkCollapsed) { // load document createSwDoc("collapsed_bookmark.odt"); // save original document save(TestFilter::ODT); // load only content.xml from the resaved document xmlDocUniquePtr pXmlDoc = parseExport(u"content.xml"_ustr); const char* const aPath("/office:document-content/office:body/office:text/text:p"); const int pos1 = getXPathPosition(pXmlDoc, aPath, "bookmark"); CPPUNIT_ASSERT_EQUAL(0, pos1); // found, and it is first CPPUNIT_ASSERT_ASSERTION_FAIL(getXPathPosition(pXmlDoc, aPath, "bookmark-start")); // not found CPPUNIT_ASSERT_ASSERTION_FAIL(getXPathPosition(pXmlDoc, aPath, "bookmark-end")); // not found } // 1. Open a new writer document // 2. Enter the text "abcdef" // 3. Select "abc" // 4. Insert a bookmark on "abc" using Insert->Bookmark. Name the bookmark "test". // 5. Open the navigator (F5) // Select the bookmark "test" using the navigator. // 6. Hit Del, thus deleting "abc" (The bookmark "test" is still there). // 7. Save the document: // // // def // // CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testRemoveBookmarkText) { // create document { // create a text document with "abcdef" createSwDoc(); SwDoc* pDoc = getSwDoc(); { SwNodeIndex aIdx(pDoc->GetNodes().GetEndOfContent(), -1); SwPaM aPaM(aIdx); pDoc->getIDocumentContentOperations().InsertString(aPaM, u"abcdef"_ustr); } // mark "abc" with "testBookmark" bookmark { SwNodeIndex aIdx(pDoc->GetNodes().GetEndOfContent(), -1); SwPaM aPaM(aIdx); lcl_selectCharacters(aPaM, 0, 3); IDocumentMarkAccess& rIDMA = *pDoc->getIDocumentMarkAccess(); sw::mark::MarkBase* pMark = rIDMA.makeMark(aPaM, SwMarkName(u"testBookmark"_ustr), IDocumentMarkAccess::MarkType::BOOKMARK, ::sw::mark::InsertMode::New); // verify CPPUNIT_ASSERT(pMark->IsExpanded()); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), rIDMA.getBookmarksCount()); } // remove text marked with bookmark { SwNodeIndex aIdx(pDoc->GetNodes().GetEndOfContent(), -1); SwPaM aPaM(aIdx); lcl_selectCharacters(aPaM, 0, 3); pDoc->getIDocumentContentOperations().DeleteRange(aPaM); // verify: bookmark is still exist IDocumentMarkAccess& rIDMA = *pDoc->getIDocumentMarkAccess(); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), rIDMA.getBookmarksCount()); } } // save document save(TestFilter::ODT); // load only content.xml from the resaved document xmlDocUniquePtr pXmlDoc = parseExport(u"content.xml"_ustr); // Bookmark without text becomes collapsed assertXPath(pXmlDoc, "//office:body/office:text/text:p/text:bookmark", 1); assertXPath(pXmlDoc, "//office:body/office:text/text:p/text:bookmark-start", 0); assertXPath(pXmlDoc, "//office:body/office:text/text:p/text:bookmark-end", 0); } // 1. Open a new writer document // 2. Enter the text "abcdef" // 3. Select "abc" // 4. Insert a bookmark on "abc" using Insert->Bookmark. Name the bookmark "test". // 5. Open the navigator (F5) // Select the bookmark "test" using the navigator. // 6. Hit Del, thus deleting "abc" (The bookmark "test" is still there). // 7. Call our macro // // Sub Main // bookmark = ThisComponent.getBookmarks().getByName("test") // bookmark.getAnchor().setString("abc") // End Sub // // The text "abc" gets inserted inside the bookmark "test", and the document now contains the string "abcdef". // 7. Save the document: // // // abc // // def // // CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testRemoveBookmarkTextAndAddNew) { // create document { // create a text document with "abcdef" createSwDoc(); SwDoc* pDoc = getSwDoc(); { SwNodeIndex aIdx(pDoc->GetNodes().GetEndOfContent(), -1); SwPaM aPaM(aIdx); pDoc->getIDocumentContentOperations().InsertString(aPaM, u"abcdef"_ustr); } // mark "abc" with "testBookmark" bookmark { SwNodeIndex aIdx(pDoc->GetNodes().GetEndOfContent(), -1); SwPaM aPaM(aIdx); lcl_selectCharacters(aPaM, 0, 3); IDocumentMarkAccess& rIDMA = *pDoc->getIDocumentMarkAccess(); sw::mark::MarkBase* pMark = rIDMA.makeMark(aPaM, SwMarkName(u"testBookmark"_ustr), IDocumentMarkAccess::MarkType::BOOKMARK, ::sw::mark::InsertMode::New); // verify CPPUNIT_ASSERT(pMark->IsExpanded()); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), rIDMA.getBookmarksCount()); } // remove text marked with bookmark { SwNodeIndex aIdx(pDoc->GetNodes().GetEndOfContent(), -1); SwPaM aPaM(aIdx); lcl_selectCharacters(aPaM, 0, 3); pDoc->getIDocumentContentOperations().DeleteRange(aPaM); // verify: bookmark is still exist IDocumentMarkAccess& rIDMA = *pDoc->getIDocumentMarkAccess(); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), rIDMA.getBookmarksCount()); } // write "abc" to area marked with "testBookmark" bookmark { // Get helper objects uno::Reference xBookmarksSupplier(mxComponent, uno::UNO_QUERY); // Create cursor from bookmark uno::Reference xTextContent( xBookmarksSupplier->getBookmarks()->getByName(u"testBookmark"_ustr), uno::UNO_QUERY); uno::Reference xRange = xTextContent->getAnchor(); CPPUNIT_ASSERT_EQUAL(u""_ustr, xRange->getString()); // write "abc" xRange->setString(u"abc"_ustr); // verify: bookmark is still exist IDocumentMarkAccess& rIDMA = *pDoc->getIDocumentMarkAccess(); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), rIDMA.getBookmarksCount()); } } // save document save(TestFilter::ODT); // load only content.xml from the resaved document xmlDocUniquePtr pXmlDoc = parseExport(u"content.xml"_ustr); const char* const aPath("/office:document-content/office:body/office:text/text:p"); CPPUNIT_ASSERT_ASSERTION_FAIL(getXPathPosition(pXmlDoc, aPath, "bookmark")); // not found const int pos2 = getXPathPosition(pXmlDoc, aPath, "bookmark-start"); const int pos3 = getXPathPosition(pXmlDoc, aPath, "text"); const int pos4 = getXPathPosition(pXmlDoc, aPath, "bookmark-end"); CPPUNIT_ASSERT_EQUAL(0, pos2); CPPUNIT_ASSERT_EQUAL(1, pos3); CPPUNIT_ASSERT_EQUAL(2, pos4); } // 1. Load document: // // // // def // // // 2. Call our macro // // Sub Main // bookmark = ThisComponent.getBookmarks().getByName("test") // bookmark.getAnchor().setString("abc") // End Sub // // The text "abc" gets inserted inside the bookmark "test", and the document now contains the string "abcdef". // 3. Save the document: // // // abcdef // // CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testRemoveBookmarkTextAndAddNewAfterReload) { // load document createSwDoc("collapsed_bookmark.odt"); SwDoc* pDoc = getSwDoc(); // write "abc" to area marked with "testBookmark" bookmark { // Get helper objects uno::Reference xBookmarksSupplier(mxComponent, uno::UNO_QUERY); // Create cursor from bookmark uno::Reference xTextContent( xBookmarksSupplier->getBookmarks()->getByName(u"test"_ustr), uno::UNO_QUERY); uno::Reference xRange = xTextContent->getAnchor(); CPPUNIT_ASSERT_EQUAL(u""_ustr, xRange->getString()); // write "abc" xRange->setString(u"abc"_ustr); // verify: bookmark is still exist IDocumentMarkAccess& rIDMA = *pDoc->getIDocumentMarkAccess(); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), rIDMA.getBookmarksCount()); } // save original document save(TestFilter::ODT); // load only content.xml from the resaved document xmlDocUniquePtr pXmlDoc = parseExport(u"content.xml"_ustr); const char* const aPath("/office:document-content/office:body/office:text/text:p"); const int pos1 = getXPathPosition(pXmlDoc, aPath, "bookmark"); const int pos2 = getXPathPosition(pXmlDoc, aPath, "text"); CPPUNIT_ASSERT_EQUAL(0, pos1); CPPUNIT_ASSERT_EQUAL(1, pos2); CPPUNIT_ASSERT_ASSERTION_FAIL(getXPathPosition(pXmlDoc, aPath, "bookmark-start")); // not found CPPUNIT_ASSERT_ASSERTION_FAIL(getXPathPosition(pXmlDoc, aPath, "bookmark-end")); // not found } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf96961) { // Insert a page break. createSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); pWrtShell->InsertPageBreak(); // Enable hide whitespace mode. SwViewOption aViewOptions(*pWrtShell->GetViewOptions()); aViewOptions.SetHideWhitespaceMode(true); pWrtShell->ApplyViewOptions(aViewOptions); calcLayout(); // Assert that the height of the last page is larger than the height of other pages. xmlDocUniquePtr pXmlDoc = parseLayoutDump(); sal_Int32 nOther = getXPath(pXmlDoc, "/root/page[1]/infos/bounds", "height").toInt32(); sal_Int32 nLast = getXPath(pXmlDoc, "/root/page[2]/infos/bounds", "height").toInt32(); CPPUNIT_ASSERT(nLast > nOther); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf88453) { createSwDoc("tdf88453.odt"); calcLayout(); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); // This was 0: the table does not fit the first page, but it wasn't split // to continue on the second page. assertXPath(pXmlDoc, "/root/page[2]/body/tab", 1); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf88453Table) { createSwDoc("tdf88453-table.odt"); calcLayout(); // This was 2: layout could not split the large outer table in the document // into 3 pages. CPPUNIT_ASSERT_EQUAL(3, getPages()); } namespace { int checkShells(const SwDocShell* pSource, const SwDocShell* pDestination) { return int(SfxClassificationHelper::CheckPaste(pSource->getDocProperties(), pDestination->getDocProperties())); } } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testClassificationPaste) { createSwDoc(); SwDocShell* pSourceShell = getSwDocShell(); uno::Reference xSourceComponent = mxComponent; mxComponent.clear(); createSwDoc(); SwDocShell* pDestinationShell = getSwDocShell(); // Not classified source, not classified destination. CPPUNIT_ASSERT_EQUAL(int(SfxClassificationCheckPasteResult::None), checkShells(pSourceShell, pDestinationShell)); // Classified source, not classified destination. cpo::uno::Sequence aInternalOnly = comphelper::InitPropertySequence({ { "Name", cpo::uno::Any(u"Internal Only"_ustr) } }); dispatchCommand(xSourceComponent, u".uno:ClassificationApply"_ustr, aInternalOnly); CPPUNIT_ASSERT_EQUAL(int(SfxClassificationCheckPasteResult::TargetDocNotClassified), checkShells(pSourceShell, pDestinationShell)); // Classified source and classified destination -- internal only has a higher level than confidential. cpo::uno::Sequence aConfidential = comphelper::InitPropertySequence({ { "Name", cpo::uno::Any(u"Confidential"_ustr) } }); dispatchCommand(mxComponent, u".uno:ClassificationApply"_ustr, aConfidential); CPPUNIT_ASSERT_EQUAL(int(SfxClassificationCheckPasteResult::DocClassificationTooLow), checkShells(pSourceShell, pDestinationShell)); xSourceComponent->dispose(); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testSmallCaps) { // Create a document, add some characters and select them. createSwDoc(); createSwDoc(); SwDocShell* pDocShell = getSwDocShell(); SwWrtShell* pWrtShell = pDocShell->GetWrtShell(); pWrtShell->Insert(u"text"_ustr); pWrtShell->SelAll(); // Dispatch the command to make them formatted small capitals. dispatchCommand(mxComponent, u".uno:SmallCaps"_ustr, {}); // This was css::style::CaseMap::NONE as the shell didn't handle the command. CPPUNIT_ASSERT_EQUAL(css::style::CaseMap::SMALLCAPS, getProperty(getRun(getParagraph(1), 1), u"CharCaseMap"_ustr)); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf98987) { createSwDoc("tdf98987.docx"); calcLayout(); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page/body/txt/anchored/SwAnchoredDrawObject[2]/SdrObject", "name", u"Rectangle 1"); sal_Int32 nRectangle1 = getXPath(pXmlDoc, "/root/page/body/txt/anchored/SwAnchoredDrawObject[2]/bounds", "top") .toInt32(); assertXPath(pXmlDoc, "/root/page/body/txt/anchored/SwAnchoredDrawObject[1]/SdrObject", "name", u"Rectangle 2"); sal_Int32 nRectangle2 = getXPath(pXmlDoc, "/root/page/body/txt/anchored/SwAnchoredDrawObject[1]/bounds", "top") .toInt32(); CPPUNIT_ASSERT_GREATER(nRectangle1, nRectangle2); assertXPath(pXmlDoc, "/root/page/body/txt/anchored/SwAnchoredDrawObject[3]/SdrObject", "name", u"Rectangle 3"); sal_Int32 nRectangle3 = getXPath(pXmlDoc, "/root/page/body/txt/anchored/SwAnchoredDrawObject[3]/bounds", "top") .toInt32(); // This failed: the 3rd rectangle had a smaller "top" value than the 2nd one, it even overlapped with the 1st one. CPPUNIT_ASSERT_GREATER(nRectangle2, nRectangle3); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf99004) { createSwDoc("tdf99004.docx"); calcLayout(); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); sal_Int32 nTextbox1Top = getXPath(pXmlDoc, "/root/page/body/txt/anchored/fly/infos/bounds", "top").toInt32(); sal_Int32 nTextBox1Height = getXPath(pXmlDoc, "/root/page/body/txt/anchored/fly/infos/bounds", "height").toInt32(); sal_Int32 nTextBox1Bottom = nTextbox1Top + nTextBox1Height; assertXPath(pXmlDoc, "/root/page/body/txt/anchored/SwAnchoredDrawObject[1]/SdrObject", "name", u"Rectangle 2"); sal_Int32 nRectangle2Top = getXPath(pXmlDoc, "/root/page/body/txt/anchored/SwAnchoredDrawObject[1]/bounds", "top") .toInt32(); // This was 3291 and 2531, should be now around 2472 and 2531, i.e. the two rectangles should not overlap anymore. CPPUNIT_ASSERT(nTextBox1Bottom < nRectangle2Top); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf84695) { createSwDoc("tdf84695.odt"); SwDoc* pDoc = getSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); SdrPage* pPage = pDoc->getIDocumentDrawModelAccess().GetDrawModel()->GetPage(0); SdrObject* pObject = pPage->GetObj(1); SwContact* pTextBox = static_cast(pObject->GetUserCall()); // First, make sure that pTextBox is a fly frame (textbox of a shape). CPPUNIT_ASSERT_EQUAL(sal_uInt16(RES_FLYFRMFMT), pTextBox->GetFormat()->Which()); // Then select it. pWrtShell->SelectObj(Point(), 0, pObject); // Now Enter + a key should add some text. SwXTextDocument* pTextDoc = getSwTextDoc(); pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 0, KEY_RETURN); emulateTyping(u"a"); uno::Reference xShape(getShape(1), uno::UNO_QUERY); // This was empty, Enter did not start the fly frame edit mode. CPPUNIT_ASSERT_EQUAL(u"a"_ustr, xShape->getString()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf84695NormalChar) { createSwDoc("tdf84695.odt"); SwDoc* pDoc = getSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); SdrPage* pPage = pDoc->getIDocumentDrawModelAccess().GetDrawModel()->GetPage(0); SdrObject* pObject = pPage->GetObj(1); SwContact* pTextBox = static_cast(pObject->GetUserCall()); // First, make sure that pTextBox is a fly frame (textbox of a shape). CPPUNIT_ASSERT_EQUAL(sal_uInt16(RES_FLYFRMFMT), pTextBox->GetFormat()->Which()); // Then select it. pWrtShell->SelectObj(Point(), 0, pObject); // Now pressing 'a' should add a character. emulateTyping(u"a"); uno::Reference xShape(getShape(1), uno::UNO_QUERY); // This was empty, pressing a normal character did not start the fly frame edit mode. CPPUNIT_ASSERT_EQUAL(u"a"_ustr, xShape->getString()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf84695Tab) { createSwDoc("tdf84695-tab.odt"); SwDoc* pDoc = getSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); SdrPage* pPage = pDoc->getIDocumentDrawModelAccess().GetDrawModel()->GetPage(0); SdrObject* pObject = pPage->GetObj(0); SwContact* pShape = static_cast(pObject->GetUserCall()); // First, make sure that pShape is a draw shape. CPPUNIT_ASSERT_EQUAL(sal_uInt16(RES_DRAWFRMFMT), pShape->GetFormat()->Which()); // Then select it. pWrtShell->SelectObj(Point(), 0, pObject); // Now pressing 'tab' should jump to the other shape. SwXTextDocument* pTextDoc = getSwTextDoc(); pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 0, KEY_TAB); pTextDoc->postKeyEvent(COKitKeyEventType::UP, 0, KEY_TAB); Scheduler::ProcessEventsToIdle(); // And finally make sure the selection has changed. const SdrMarkList& rMarkList = pWrtShell->GetDrawView()->GetMarkedObjectList(); SwContact* pOtherShape = static_cast(rMarkList.GetMark(0)->GetMarkedSdrObj()->GetUserCall()); // This failed, 'tab' didn't do anything -> the selected shape was the same. CPPUNIT_ASSERT(pOtherShape != pShape); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTableStyleUndo) { createSwDoc(); SwDoc* pDoc = getSwDoc(); sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); sal_Int32 nStyleCount = pDoc->GetTableStyles().size(); SwTableAutoFormat* pStyle = pDoc->MakeTableStyle(TableStyleName(u"Test Style"_ustr)); SvxBrushItem aBackground(COL_LIGHTMAGENTA, RES_BACKGROUND); pStyle->GetBoxFormat(0).GetProps().SetBackground(aBackground); CPPUNIT_ASSERT_EQUAL(sal_Int32(pDoc->GetTableStyles().size()), nStyleCount + 1); rUndoManager.Undo(); CPPUNIT_ASSERT_EQUAL(sal_Int32(pDoc->GetTableStyles().size()), nStyleCount); rUndoManager.Redo(); CPPUNIT_ASSERT_EQUAL(sal_Int32(pDoc->GetTableStyles().size()), nStyleCount + 1); // check if attributes are preserved pStyle = pDoc->GetTableStyles().FindAutoFormat(TableStyleName(u"Test Style"_ustr)); CPPUNIT_ASSERT(pStyle); CPPUNIT_ASSERT(bool(pStyle->GetBoxFormat(0).GetProps().GetBackground() == aBackground)); pDoc->DelTableStyle(TableStyleName(u"Test Style"_ustr)); CPPUNIT_ASSERT_EQUAL(sal_Int32(pDoc->GetTableStyles().size()), nStyleCount); rUndoManager.Undo(); CPPUNIT_ASSERT_EQUAL(sal_Int32(pDoc->GetTableStyles().size()), nStyleCount + 1); pStyle = pDoc->GetTableStyles().FindAutoFormat(TableStyleName(u"Test Style"_ustr)); // check if attributes are preserved CPPUNIT_ASSERT(pStyle); CPPUNIT_ASSERT(bool(pStyle->GetBoxFormat(0).GetProps().GetBackground() == aBackground)); rUndoManager.Redo(); CPPUNIT_ASSERT_EQUAL(sal_Int32(pDoc->GetTableStyles().size()), nStyleCount); // undo delete so we can replace the style rUndoManager.Undo(); CPPUNIT_ASSERT_EQUAL(sal_Int32(pDoc->GetTableStyles().size()), nStyleCount + 1); pStyle = pDoc->GetTableStyles().FindAutoFormat(TableStyleName(u"Test Style"_ustr)); CPPUNIT_ASSERT(pStyle); CPPUNIT_ASSERT(bool(pStyle->GetBoxFormat(0).GetProps().GetBackground() == aBackground)); SwTableAutoFormat aNewStyle(TableStyleName(u"Test Style2"_ustr)); SvxBrushItem aBackground2(COL_LIGHTGREEN, RES_BACKGROUND); aNewStyle.GetBoxFormat(0).GetProps().SetBackground(aBackground2); pDoc->ChgTableStyle(TableStyleName(u"Test Style"_ustr), aNewStyle); pStyle = pDoc->GetTableStyles().FindAutoFormat(TableStyleName(u"Test Style"_ustr)); CPPUNIT_ASSERT(pStyle); CPPUNIT_ASSERT(bool(pStyle->GetBoxFormat(0).GetProps().GetBackground() == aBackground2)); rUndoManager.Undo(); pStyle = pDoc->GetTableStyles().FindAutoFormat(TableStyleName(u"Test Style"_ustr)); CPPUNIT_ASSERT(pStyle); CPPUNIT_ASSERT(bool(pStyle->GetBoxFormat(0).GetProps().GetBackground() == aBackground)); rUndoManager.Redo(); pStyle = pDoc->GetTableStyles().FindAutoFormat(TableStyleName(u"Test Style"_ustr)); CPPUNIT_ASSERT(pStyle); CPPUNIT_ASSERT(bool(pStyle->GetBoxFormat(0).GetProps().GetBackground() == aBackground2)); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testRedlineCopyPaste) { // regressed in tdf#106746 createSwDoc(); SwDoc* pDoc = getSwDoc(); SwNodeIndex aIdx(pDoc->GetNodes().GetEndOfContent(), -1); SwPaM aPaM(aIdx); pDoc->getIDocumentContentOperations().InsertString(aPaM, u"abzdezgh"_ustr); SwTextNode* pTextNode = aPaM.GetPointNode().GetTextNode(); // Turn on track changes, make changes, turn off track changes uno::Reference xPropertySet(mxComponent, uno::UNO_QUERY); xPropertySet->setPropertyValue(u"RecordChanges"_ustr, cpo::uno::Any(true)); lcl_selectCharacters(aPaM, 2, 3); pDoc->getIDocumentContentOperations().ReplaceRange(aPaM, u"c"_ustr, false); lcl_selectCharacters(aPaM, 6, 7); pDoc->getIDocumentContentOperations().ReplaceRange(aPaM, u"f"_ustr, false); xPropertySet->setPropertyValue(u"RecordChanges"_ustr, cpo::uno::Any(false)); // Create the clipboard document. SwDoc aClipboard; SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); // Select the whole content, copy, delete the original and paste the copied content pWrtShell->SelAll(); pWrtShell->Copy(aClipboard); pWrtShell->Delete(); pWrtShell->Paste(aClipboard); // With the bug this is "abzcdefgh", ie. contains the first deleted piece, too CPPUNIT_ASSERT_EQUAL(u"abcdefgh"_ustr, pTextNode->GetText()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf135260) { createSwDoc(); SwDoc* pDoc = getSwDoc(); SwDocShell* pDocShell = getSwDocShell(); SwWrtShell* pWrtShell = pDocShell->GetWrtShell(); pWrtShell->Insert(u"test"_ustr); // Turn on track changes uno::Reference xPropertySet(mxComponent, uno::UNO_QUERY); xPropertySet->setPropertyValue(u"RecordChanges"_ustr, cpo::uno::Any(true)); for (int i = 0; i < 4; i++) { pWrtShell->DelLeft(); } SwEditShell* const pEditShell(pDoc->GetEditShell()); CPPUNIT_ASSERT(pEditShell); // accept all redlines while (pEditShell->GetRedlineCount()) pEditShell->AcceptRedline(0); // Without the fix in place, this test would have failed with // - Expected: // - Actual : tes CPPUNIT_ASSERT_EQUAL(u""_ustr, getParagraph(1)->getString()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testRedlineParam) { // Create a document with minimal content. createSwDoc(); SwDoc* pDoc = getSwDoc(); SwDocShell* pDocShell = getSwDocShell(); SwWrtShell* pWrtShell = pDocShell->GetWrtShell(); pWrtShell->Insert(u"middle"_ustr); // Turn on track changes, and add changes to the start and end of the document. uno::Reference xPropertySet(mxComponent, uno::UNO_QUERY); xPropertySet->setPropertyValue(u"RecordChanges"_ustr, cpo::uno::Any(true)); pWrtShell->StartOfSection(); pWrtShell->Insert(u"aaa"_ustr); pWrtShell->EndOfSection(); pWrtShell->Insert(u"zzz"_ustr); const SwRedlineTable& rTable = pDoc->getIDocumentRedlineAccess().GetRedlineTable(); CPPUNIT_ASSERT_EQUAL(static_cast(2), rTable.size()); // Select the first redline. pWrtShell->StartOfSection(); cpo::uno::Sequence aPropertyValues(comphelper::InitPropertySequence( { { "NextTrackedChange", cpo::uno::Any(o3tl::narrowing(rTable[0]->GetId())) } })); dispatchCommand(mxComponent, u".uno:NextTrackedChange"_ustr, aPropertyValues); SwShellCursor* pShellCursor = pWrtShell->getShellCursor(false); // This failed: the parameter wasn't handled so the next change (zzz) was // selected, not the first one (aaa). CPPUNIT_ASSERT_EQUAL(u"aaa"_ustr, pShellCursor->GetText()); // Select the second redline. pWrtShell->StartOfSection(); aPropertyValues = comphelper::InitPropertySequence( { { "NextTrackedChange", cpo::uno::Any(o3tl::narrowing(rTable[1]->GetId())) } }); dispatchCommand(mxComponent, u".uno:NextTrackedChange"_ustr, aPropertyValues); pShellCursor = pWrtShell->getShellCursor(false); CPPUNIT_ASSERT_EQUAL(u"zzz"_ustr, pShellCursor->GetText()); // Move the cursor to the start again, and reject the second change. pWrtShell->StartOfSection(); aPropertyValues = comphelper::InitPropertySequence( { { "RejectTrackedChange", cpo::uno::Any(o3tl::narrowing(rTable[1]->GetId())) } }); dispatchCommand(mxComponent, u".uno:RejectTrackedChange"_ustr, aPropertyValues); pShellCursor = pWrtShell->getShellCursor(false); // This was 'middlezzz', the uno command rejected the redline under the // cursor, instead of the requested one. CPPUNIT_ASSERT_EQUAL(u"aaamiddle"_ustr, pShellCursor->GetPoint()->GetNode().GetTextNode()->GetText()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testRedlineViewAuthor) { // Test that setting an author at an SwView level has effect. // Create a document with minimal content. createSwDoc(); SwDoc* pDoc = getSwDoc(); SwDocShell* pDocShell = getSwDocShell(); SwWrtShell* pWrtShell = pDocShell->GetWrtShell(); pWrtShell->Insert(u"middle"_ustr); SwView* pView = pDocShell->GetView(); static constexpr OUString aAuthor(u"A U. Thor"_ustr); pView->SetRedlineAuthor(aAuthor); pDocShell->SetView(pView); // Turn on track changes, and add changes to the start of the document. uno::Reference xPropertySet(mxComponent, uno::UNO_QUERY); xPropertySet->setPropertyValue(u"RecordChanges"_ustr, cpo::uno::Any(true)); pWrtShell->StartOfSection(); pWrtShell->Insert(u"aaa"_ustr); // Now assert that SwView::SetRedlineAuthor() had an effect. const SwRedlineTable& rTable = pDoc->getIDocumentRedlineAccess().GetRedlineTable(); CPPUNIT_ASSERT_EQUAL(static_cast(1), rTable.size()); SwRangeRedline* pRedline = rTable[0]; // This was 'Unknown Author' instead of 'A U. Thor'. CPPUNIT_ASSERT_EQUAL(aAuthor, pRedline->GetAuthorString()); // Insert a comment and assert that SwView::SetRedlineAuthor() affects this as well. dispatchCommand(mxComponent, u".uno:.uno:InsertAnnotation"_ustr, {}); uno::Reference xTextFieldsSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xFieldsAccess( xTextFieldsSupplier->getTextFields()); uno::Reference xFields(xFieldsAccess->createEnumeration()); uno::Reference xField(xFields->nextElement(), uno::UNO_QUERY); // This was 'Unknown Author' instead of 'A U. Thor'. CPPUNIT_ASSERT_EQUAL(aAuthor, xField->getPropertyValue(u"Author"_ustr).get()); //Reset the redline author after using it, otherwise, it might interfere with other unittests pView->SetRedlineAuthor(u"Unknown Author"_ustr); pDocShell->SetView(pView); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf91292) { createSwDoc("tdf91292_paraBackground.docx"); uno::Reference xPropertySet(getParagraph(1), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL_MESSAGE("Solid background color", drawing::FillStyle_SOLID, getProperty(xPropertySet, u"FillStyle"_ustr)); CPPUNIT_ASSERT_EQUAL_MESSAGE("Background Color", Color(0x5C2D91), getProperty(xPropertySet, u"FillColor"_ustr)); // remove background color xPropertySet->setPropertyValue(u"FillStyle"_ustr, cpo::uno::Any(drawing::FillStyle_NONE)); // Save it and load it back. saveAndReload(TestFilter::DOCX); xPropertySet.set(getParagraph(1), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL_MESSAGE("No background color", drawing::FillStyle_NONE, getProperty(xPropertySet, u"FillStyle"_ustr)); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf78727) { createSwDoc("tdf78727.docx"); SwDoc* pDoc = getSwDoc(); SdrPage* pPage = pDoc->getIDocumentDrawModelAccess().GetDrawModel()->GetPage(0); // This was 1: make sure we don't loose the TextBox anchored inside the // table that is moved inside a text frame. CPPUNIT_ASSERT(SwTextBoxHelper::getCount(pPage) > 1); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testRedlineTimestamp) { // Test that a redline timestamp's second is not always 0. // Create a document with minimal content. createSwDoc(); SwDoc* pDoc = getSwDoc(); SwDocShell* pDocShell = getSwDocShell(); SwWrtShell* pWrtShell = pDocShell->GetWrtShell(); pWrtShell->Insert(u"middle"_ustr); // Turn on track changes, and add changes to the start and to the end of // the document. uno::Reference xPropertySet(mxComponent, uno::UNO_QUERY); xPropertySet->setPropertyValue(u"RecordChanges"_ustr, cpo::uno::Any(true)); pWrtShell->StartOfSection(); pWrtShell->Insert(u"aaa"_ustr); osl::Thread::wait(std::chrono::seconds(1)); pWrtShell->EndOfSection(); pWrtShell->Insert(u"zzz"_ustr); // Inserting additional characters at the start changed the table size to // 3, i.e. the first and the second "aaa" wasn't combined. pWrtShell->StartOfSection(); pWrtShell->Insert(u"aaa"_ustr); // Now assert that at least one of the seconds are not 0. const SwRedlineTable& rTable = pDoc->getIDocumentRedlineAccess().GetRedlineTable(); if (rTable.size() >= 2 && rTable[0]->GetRedlineData().GetTimeStamp().GetMin() != rTable[1]->GetRedlineData().GetTimeStamp().GetMin()) // The relatively rare case when waiting for a second also changes the minute. return; CPPUNIT_ASSERT_EQUAL(static_cast(2), rTable.size()); sal_uInt16 nSec1 = rTable[0]->GetRedlineData().GetTimeStamp().GetSec(); sal_uInt16 nSec2 = rTable[1]->GetRedlineData().GetTimeStamp().GetSec(); // This failed, seconds was always 0. CPPUNIT_ASSERT(nSec1 != 0 || nSec2 != 0); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testCursorWindows) { // Create a new document with one window. createSwDoc(); SwDocShell* pDocShell = getSwDocShell(); SwWrtShell* pWrtShell1 = pDocShell->GetWrtShell(); // Create a second view and type something. pDocShell->GetViewShell()->GetViewFrame().GetDispatcher()->Execute( SID_NEWWINDOW, SfxCallMode::SYNCHRON | SfxCallMode::RECORD); SwWrtShell* pWrtShell2 = pDocShell->GetWrtShell(); OUString aText(u"foo"_ustr); pWrtShell2->Insert(aText); // Assert that only the cursor of the actual window move, not other cursors. SwShellCursor* pShellCursor1 = pWrtShell1->getShellCursor(false); SwShellCursor* pShellCursor2 = pWrtShell2->getShellCursor(false); // This was 3, not 0 -- cursor of the other window moved. CPPUNIT_ASSERT_EQUAL(static_cast(0), pShellCursor1->Start()->GetContentIndex()); CPPUNIT_ASSERT_EQUAL(aText.getLength(), pShellCursor2->Start()->GetContentIndex()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testLandscape) { // Set page orientation to landscape. createSwDoc(); cpo::uno::Sequence aPropertyValues( comphelper::InitPropertySequence({ { "AttributePage.Landscape", cpo::uno::Any(true) } })); dispatchCommand(mxComponent, u".uno:AttributePage"_ustr, aPropertyValues); // Assert that the document model was modified. SwDocShell* pDocShell = getSwDocShell(); SwWrtShell* pWrtShell = pDocShell->GetWrtShell(); size_t nPageDesc = pWrtShell->GetCurPageDesc(); // This failed, page was still portrait. CPPUNIT_ASSERT(pWrtShell->GetPageDesc(nPageDesc).GetLandscape()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf95699) { // Open the document with single FORMCHECKBOX field, select all and copy to clipboard // then check that clipboard contains the FORMCHECKBOX in text body. // Previously that failed. createSwDoc("tdf95699.odt"); SwDoc* pDoc = getSwDoc(); IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); SwDoc aClipboard; SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); pWrtShell->SelAll(); pWrtShell->Copy(aClipboard); pMarkAccess = aClipboard.getIDocumentMarkAccess(); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), pMarkAccess->getAllMarksCount()); ::sw::mark::Fieldmark* pFieldMark = pMarkAccess->getFieldmarkAfter(SwPosition(aClipboard.GetNodes().GetEndOfExtras()), false); CPPUNIT_ASSERT_EQUAL(u"vnd.oasis.opendocument.field.FORMCHECKBOX"_ustr, pFieldMark->GetFieldname()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf151548_tabNavigation2) { // given a form-protected doc with 2 unchecked legacy fieldmark checkboxes, 1 modern // checkbox, and a couple of other content controls that are not supposed to // have their contents selected upon entry into the control (i.e. no placeholder text). createSwDoc("tdf151548_tabNavigation2.docx"); SwDoc* pDoc = getSwDoc(); IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), pMarkAccess->getFieldmarksCount()); // verify that the checkboxes start off in the unchecked state for (auto it = pMarkAccess->getFieldmarksBegin(); it != pMarkAccess->getFieldmarksEnd(); ++it) { sw::mark::CheckboxFieldmark* pCheckBox = dynamic_cast<::sw::mark::CheckboxFieldmark*>(*it); CPPUNIT_ASSERT(!pCheckBox->IsChecked()); } // Toggle on the legacy checkbox SwXTextDocument* pTextDoc = getSwTextDoc(); pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 32, KEY_SPACE); // Tab to the next control - the modern checkbox pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 0, KEY_TAB); // Tab to the next control - the second legacy checkbox, and toggle it on. pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 0, KEY_TAB); pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 32, KEY_SPACE); // Tab to the next control - a plain text control without placeholder text pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 0, KEY_TAB); // Tab to the next control - a combobox with custom text pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 0, KEY_TAB); Scheduler::ProcessEventsToIdle(); for (auto it = pMarkAccess->getFieldmarksBegin(); it != pMarkAccess->getFieldmarksEnd(); ++it) { sw::mark::CheckboxFieldmark* pCheckBox = dynamic_cast<::sw::mark::CheckboxFieldmark*>(*it); // verify that the legacy checkbox became checked by the first loop. CPPUNIT_ASSERT(pCheckBox->IsChecked()); // This is where it was failing. Tab got stuck moving into the plain text/combobox, // so it could never loop around. At this point we are at the end of the loop, // so the next tab should take us back to the beginning with the first legacy checkbox. // Tab to the legacy checkbox, and toggle it off. pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 0, KEY_TAB); pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 32, KEY_SPACE); Scheduler::ProcessEventsToIdle(); CPPUNIT_ASSERT(!pCheckBox->IsChecked()); // Tab to the next content control pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 0, KEY_TAB); } } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf151548_tabNavigation) { // given a form-protected doc with 4 unchecked legacy fieldmark checkboxes (and several modern // content controls which all have a tabstop of -1 to disable tabstop navigation to them) // we want to test that tab navigation completes and loops around to continue at the beginning. createSwDoc("tdf151548_tabNavigation.docm"); SwDoc* pDoc = getSwDoc(); IDocumentMarkAccess* pMarkAccess = pDoc->getIDocumentMarkAccess(); CPPUNIT_ASSERT_EQUAL(sal_Int32(4), pMarkAccess->getFieldmarksCount()); SwXTextDocument* pTextDoc = getSwTextDoc(); // Tab and toggle 4 times, verifying beforehand that the state was unchecked for (auto it = pMarkAccess->getFieldmarksBegin(); it != pMarkAccess->getFieldmarksEnd(); ++it) { sw::mark::CheckboxFieldmark* pCheckBox = dynamic_cast<::sw::mark::CheckboxFieldmark*>(*it); CPPUNIT_ASSERT(!pCheckBox->IsChecked()); pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 32, KEY_SPACE); // toggle checkbox on pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 0, KEY_TAB); // move to next control Scheduler::ProcessEventsToIdle(); } // Tab 4 more times, verifying beforehand that the checkbox had been toggle on, then toggles off // meaning that looping is working, and no other controls are reacting to the tab key. for (auto it = pMarkAccess->getFieldmarksBegin(); it != pMarkAccess->getFieldmarksEnd(); ++it) { sw::mark::CheckboxFieldmark* pCheckBox = dynamic_cast<::sw::mark::CheckboxFieldmark*>(*it); CPPUNIT_ASSERT(pCheckBox->IsChecked()); pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 32, KEY_SPACE); // toggle checkbox off Scheduler::ProcessEventsToIdle(); CPPUNIT_ASSERT(!pCheckBox->IsChecked()); pTextDoc->postKeyEvent(COKitKeyEventType::DOWN, 0, KEY_TAB); // move to next control } } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf104032) { // Open the document with FORMCHECKBOX field, select it and copy to clipboard // Go to end of document and paste it, then undo // Previously that asserted in debug build. createSwDoc("tdf104032.odt"); SwDoc* pDoc = getSwDoc(); sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); SwDoc aClipboard; SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); pWrtShell->StartOfSection(); pWrtShell->Right(SwCursorSkipMode::Chars, /*bSelect=*/true, 1, /*bBasicCall=*/false); pWrtShell->Copy(aClipboard); pWrtShell->EndOfSection(); pWrtShell->Paste(aClipboard); rUndoManager.Undo(); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf104440) { createSwDoc("tdf104440.odt"); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); // This was 0: both Text Frames in the document were anchored to a // paragraph on page 1, while we expect that the second Text Frame is // anchored to a paragraph on page 2. assertXPath(pXmlDoc, "//page[2]/body/txt/anchored"); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf104425) { createSwDoc("tdf104425.odt"); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); // The document contains one top-level 1-cell table with minimum row height set to 70 cm, // and the cell contents does not exceed the minimum row height. // It should span over 3 pages. assertXPath(pXmlDoc, "//page", 3); sal_Int32 nHeight1 = getXPath(pXmlDoc, "//page[1]/body/tab/row/infos/bounds", "height").toInt32(); sal_Int32 nHeight2 = getXPath(pXmlDoc, "//page[2]/body/tab/row/infos/bounds", "height").toInt32(); sal_Int32 nHeight3 = getXPath(pXmlDoc, "//page[3]/body/tab/row/infos/bounds", "height").toInt32(); double fSumHeight_mm = o3tl::convert(nHeight1 + nHeight2 + nHeight3, o3tl::Length::twip, o3tl::Length::mm); CPPUNIT_ASSERT_DOUBLES_EQUAL(700.0, fSumHeight_mm, 0.05); } // accepting change tracking gets stuck on change CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf104814) { createSwDoc("tdf104814.docx"); SwDoc* pDoc = getSwDoc(); SwEditShell* const pEditShell(pDoc->GetEditShell()); CPPUNIT_ASSERT(pEditShell); // accept all redlines while (pEditShell->GetRedlineCount()) pEditShell->AcceptRedline(0); } // crash at redo of accepting table change tracking imported from DOCX CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTableRedlineRedoCrash) { createSwDoc("TC-table-del-add.docx"); SwDoc* pDoc = getSwDoc(); sw::UndoManager& rUndoManager = pDoc->GetUndoManager(); // accept all redlines, Undo and accept all redlines again IDocumentRedlineAccess& rIDRA(pDoc->getIDocumentRedlineAccess()); rIDRA.AcceptAllRedline(/*bAccept=*/true); rUndoManager.Undo(); // without the fix, it crashes rIDRA.AcceptAllRedline(true); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTableRemoveHasTextChangesOnly) { createSwDoc("TC-table-del-add.docx"); SwDoc* pDoc = getSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); CPPUNIT_ASSERT(pWrtShell); // disable Record Changes dispatchCommand(mxComponent, u".uno:TrackChanges"_ustr, {}); CPPUNIT_ASSERT_MESSAGE("redlining should be off", !pDoc->getIDocumentRedlineAccess().IsRedlineOn()); // 4 rows in Show Changes mode xmlDocUniquePtr pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); // Accepting tracked deletions results 3 rows IDocumentRedlineAccess& rIDRA(pDoc->getIDocumentRedlineAccess()); rIDRA.AcceptAllRedline(/*bAccept=*/true); Scheduler::ProcessEventsToIdle(); pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 3); // Undo: 4 rows again pDoc->GetIDocumentUndoRedo().Undo(); pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); // Accepting again: 3 rows (Undo of HasTextChangesOnly is correct) rIDRA.AcceptAllRedline(/*bAccept=*/true); Scheduler::ProcessEventsToIdle(); pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 3); // Undo: 4 rows again pDoc->GetIDocumentUndoRedo().Undo(); pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); // Move the cursor after the redline, and insert some text without change tracking pWrtShell->Right(SwCursorSkipMode::Chars, /*bSelect=*/false, 1, /*bBasicCall=*/false); pWrtShell->Insert(u"X"_ustr); // Accepting again: 4 rows (extra text keeps the deleted row) rIDRA.AcceptAllRedline(/*bAccept=*/true); Scheduler::ProcessEventsToIdle(); pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); // delete the extra text with change tracking: // this resulted tracked row deletion again, because of missing // removing of HasTextChangeOnly SwTabLine property at accepting deletions previously // disable Record Changes dispatchCommand(mxComponent, u".uno:TrackChanges"_ustr, {}); CPPUNIT_ASSERT_MESSAGE("redlining should be on", pDoc->getIDocumentRedlineAccess().IsRedlineOn()); dispatchCommand(mxComponent, u".uno:SwBackSpace"_ustr, {}); rIDRA.AcceptAllRedline(/*bAccept=*/true); Scheduler::ProcessEventsToIdle(); pXmlDoc = parseLayoutDump(); // This was 3 assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTableRemoveHasTextChangesOnly2) { createSwDoc("TC-table-del-add.docx"); SwDoc* pDoc = getSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); CPPUNIT_ASSERT(pWrtShell); // disable Record Changes dispatchCommand(mxComponent, u".uno:TrackChanges"_ustr, {}); CPPUNIT_ASSERT_MESSAGE("redlining should be off", !pDoc->getIDocumentRedlineAccess().IsRedlineOn()); // check redline count SwEditShell* const pEditShell(pDoc->GetEditShell()); CPPUNIT_ASSERT(pEditShell); CPPUNIT_ASSERT_EQUAL(static_cast(14), pEditShell->GetRedlineCount()); // 4 rows in Show Changes mode xmlDocUniquePtr pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); // Move the cursor to the tracked insertion, after the first redline to activate the // acception of the whole table row insertion with a single "Accept Change" pWrtShell->Down(/*bSelect=*/false); pWrtShell->Down(/*bSelect=*/false); pWrtShell->Down(/*bSelect=*/false); pWrtShell->Right(SwCursorSkipMode::Chars, /*bSelect=*/false, 1, /*bBasicCall=*/false); Scheduler::ProcessEventsToIdle(); dispatchCommand(mxComponent, u".uno:AcceptTrackedChange"_ustr, {}); pXmlDoc = parseLayoutDump(); // Accepting tracked insertion results still 4 rows, but less redlines assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); CPPUNIT_ASSERT_EQUAL(static_cast(11), pEditShell->GetRedlineCount()); // Undo: 4 rows again pDoc->GetIDocumentUndoRedo().Undo(); pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); CPPUNIT_ASSERT_EQUAL(static_cast(14), pEditShell->GetRedlineCount()); // To check Undo of HasTextChangesOnly reject the same row results 3 rows dispatchCommand(mxComponent, u".uno:Escape"_ustr, {}); dispatchCommand(mxComponent, u".uno:RejectTrackedChange"_ustr, {}); pXmlDoc = parseLayoutDump(); // This was 4 (lost HasTextChangesOnly) assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 3); // Undo: 4 rows again pDoc->GetIDocumentUndoRedo().Undo(); pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); CPPUNIT_ASSERT_EQUAL(static_cast(14), pEditShell->GetRedlineCount()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf147182_AcceptAllChangesInTableSelection) { createSwDoc("TC-table-del-add.docx"); SwDoc* pDoc = getSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); CPPUNIT_ASSERT(pWrtShell); // check redline count SwEditShell* const pEditShell(pDoc->GetEditShell()); CPPUNIT_ASSERT(pEditShell); CPPUNIT_ASSERT_EQUAL(static_cast(14), pEditShell->GetRedlineCount()); // 4 rows in Show Changes mode xmlDocUniquePtr pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); // Select the first table to get a table selection dispatchCommand(mxComponent, u".uno:SelectAll"_ustr, {}); dispatchCommand(mxComponent, u".uno:SelectAll"_ustr, {}); dispatchCommand(mxComponent, u".uno:AcceptTrackedChange"_ustr, {}); pXmlDoc = parseLayoutDump(); // Accepting tracked changes in the selected table results 3 rows // This was 4 (only text changes of the first selected cell were accepted) assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 3); CPPUNIT_ASSERT_EQUAL(static_cast(8), pEditShell->GetRedlineCount()); // Undo: 4 rows again pDoc->GetIDocumentUndoRedo().Undo(); pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); CPPUNIT_ASSERT_EQUAL(static_cast(14), pEditShell->GetRedlineCount()); // To check Undo of HasTextChangesOnly reject the same row results 3 rows dispatchCommand(mxComponent, u".uno:Escape"_ustr, {}); dispatchCommand(mxComponent, u".uno:SelectAll"_ustr, {}); dispatchCommand(mxComponent, u".uno:SelectAll"_ustr, {}); dispatchCommand(mxComponent, u".uno:RejectTrackedChange"_ustr, {}); pXmlDoc = parseLayoutDump(); // This was 4 (only text changes of the first selected cell were rejected) assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 3); // Undo: 4 rows again pDoc->GetIDocumentUndoRedo().Undo(); pXmlDoc = parseLayoutDump(); assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row", 4); CPPUNIT_ASSERT_EQUAL(static_cast(14), pEditShell->GetRedlineCount()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf66405) { // Imported formula should have zero margins createSwDoc("tdf66405.docx"); uno::Reference xEmbeddedObjectsSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xEmbeddedObjects = xEmbeddedObjectsSupplier->getEmbeddedObjects(); uno::Reference xFormula; xEmbeddedObjects->getByName(xEmbeddedObjects->getElementNames()[0]) >>= xFormula; uno::Reference xComponent; xFormula->getPropertyValue(u"Component"_ustr) >>= xComponent; // Test embedded object's margins sal_Int32 nLeftMargin, nRightMargin, nTopMargin, nBottomMargin; xFormula->getPropertyValue(u"LeftMargin"_ustr) >>= nLeftMargin; xFormula->getPropertyValue(u"RightMargin"_ustr) >>= nRightMargin; xFormula->getPropertyValue(u"TopMargin"_ustr) >>= nTopMargin; xFormula->getPropertyValue(u"BottomMargin"_ustr) >>= nBottomMargin; CPPUNIT_ASSERT_EQUAL(sal_Int32(0), nLeftMargin); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), nRightMargin); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), nTopMargin); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), nBottomMargin); // Test embedded object component's margins xComponent->getPropertyValue(u"LeftMargin"_ustr) >>= nLeftMargin; xComponent->getPropertyValue(u"RightMargin"_ustr) >>= nRightMargin; xComponent->getPropertyValue(u"TopMargin"_ustr) >>= nTopMargin; xComponent->getPropertyValue(u"BottomMargin"_ustr) >>= nBottomMargin; CPPUNIT_ASSERT_EQUAL(sal_Int32(0), nLeftMargin); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), nRightMargin); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), nTopMargin); CPPUNIT_ASSERT_EQUAL(sal_Int32(0), nBottomMargin); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf35021_tabOverMarginDemo) { #if HAVE_MORE_FONTS createSwDoc("tdf35021_tabOverMarginDemo.doc"); calcLayout(); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); // Tabs should go past the margin @ ~3381 sal_Int32 nMargin = getXPath(pXmlDoc, "//body/txt[1]/infos/prtBounds", "width").toInt32(); // left tab was 3381 because it got its own full line sal_Int32 nWidth = getXPath(pXmlDoc, "//SwFixPortion[@type='PortionType::TabLeft']", "width").toInt32(); CPPUNIT_ASSERT_MESSAGE("Left Tab width is ~4479", nMargin < nWidth); // center tab was 842 nWidth = getXPath(pXmlDoc, "//SwFixPortion[@type='PortionType::TabCenter']", "width").toInt32(); CPPUNIT_ASSERT_MESSAGE("Center Tab width is ~3521", nMargin < nWidth); // right tab was probably the same as center tab. nWidth = getXPath(pXmlDoc, "//SwFixPortion[@type='PortionType::TabRight']", "width").toInt32(); CPPUNIT_ASSERT_MESSAGE("Right Tab width is ~2907", sal_Int32(2500) < nWidth); // decimal tab was 266 nWidth = getXPath(pXmlDoc, "//SwFixPortion[@type='PortionType::TabDecimal']", "width").toInt32(); CPPUNIT_ASSERT_MESSAGE("Decimal Tab width is ~4096", nMargin < nWidth); #endif } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf106701_tabOverMarginAutotab) { createSwDoc("tdf106701_tabOverMarginAutotab.doc"); calcLayout(); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); // The right margin is ~3378 sal_Int32 nRightMargin = getXPath(pXmlDoc, "//body/txt[1]/infos/prtBounds", "width").toInt32(); // Automatic tabstops should never be affected by tabOverMargin compatibility // The 1st line's width previously was ~9506 sal_Int32 nWidth = getXPath(pXmlDoc, "//SwParaPortion/SwLineLayout[1]", "width").toInt32(); CPPUNIT_ASSERT_MESSAGE("1st line's width is less than the right margin", nWidth < nRightMargin); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf104492) { createSwDoc("tdf104492.docx"); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); // The document should split table over 3 pages. assertXPath(pXmlDoc, "//page", 3); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf107025) { // Tdf107025 - characters advance with wrong distance, so that // they are cluttered because of negative value or // break into multiple lines because of overflow. // The test document uses DFKAI-SB shipped with Windows. createSwDoc("tdf107025.odt"); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); // Verify the number of characters in each line. CPPUNIT_ASSERT_EQUAL(sal_Int32(1), getXPath(pXmlDoc, "(//SwLinePortion)[1]", "length").toInt32()); CPPUNIT_ASSERT_EQUAL(sal_Int32(9), getXPath(pXmlDoc, "(//SwLinePortion)[2]", "length").toInt32()); // Do the subsequent test only if the first line can be displayed, // in case that the required font does not exist. sal_Int32 nWidth1 = getXPath(pXmlDoc, "(//SwLinePortion)[1]", "width").toInt32(); if (!nWidth1) return; CPPUNIT_ASSERT(!getXPath(pXmlDoc, "(//SwLinePortion)[2]", "width").isEmpty()); sal_Int32 nWidth2 = getXPath(pXmlDoc, "(//SwLinePortion)[2]", "width").toInt32(); sal_Int32 nRatio = nWidth2 / nWidth1; CPPUNIT_ASSERT(nRatio >= 9); // Occupy at least 9 cells. CPPUNIT_ASSERT(nRatio < 18); // Occupy at most 18 cells. } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf107362) { createSwDoc("tdf107362.odt"); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); sal_Int32 nHeight = getXPath(pXmlDoc, "(//SwParaPortion/SwLineLayout/child::*[@type='PortionType::Text'])[1]", "height") .toInt32(); sal_Int32 nWidth1 = getXPath(pXmlDoc, "(//SwParaPortion/SwLineLayout/child::*[@type='PortionType::Text'])[1]", "width") .toInt32(); sal_Int32 nWidth2 = getXPath(pXmlDoc, "(//SwParaPortion/SwLineLayout/child::*[@type='PortionType::Text'])[2]", "width") .toInt32(); sal_Int32 nLineWidth = getXPath(pXmlDoc, "//SwParaPortion/SwLineLayout", "width").toInt32(); sal_Int32 nKernWidth = nLineWidth - nWidth1 - nWidth2; // Test only if fonts are available if (nWidth1 > 500 && nWidth2 > 200) { // Kern width should be smaller than 1/3 of the CJK font height. CPPUNIT_ASSERT(nKernWidth * 3 < nHeight); } } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf105417) { createSwDoc("tdf105417.odt"); SwView* pView = getSwDocShell()->GetView(); CPPUNIT_ASSERT(pView); uno::Reference xHyphenator = LinguMgr::GetHyphenator(); CPPUNIT_ASSERT(xHyphenator.is()); // If there are no English hyphenation rules installed, we can't test // hyphenation. if (!xHyphenator->hasLocale(lang::Locale(u"en"_ustr, u"US"_ustr, OUString()))) return; uno::Reference xLinguProperties(LinguMgr::GetLinguPropertySet()); // Automatic hyphenation means not opening a dialog, but going ahead // non-interactively. xLinguProperties->setIsHyphAuto(true); SwHyphWrapper aWrap(*pView, xHyphenator, /*bStart=*/false, /*bOther=*/true, /*bSelection=*/false); // This never returned, it kept trying to hyphenate the last word // (greenbacks) again and again. aWrap.SpellDocument(); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf105625) { createSwDoc("tdf105625.fodt"); SwDoc* pDoc = getSwDoc(); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); // Ensure correct initial setting ScopedConfigValue aCfg(false); // We should be able to edit at positions adjacent to fields. // Check if the start and the end of the 1st paragraph are not protected // (they are adjacent to FORMCHECKBOX) pWrtShell->SttPara(); CPPUNIT_ASSERT_EQUAL(false, pWrtShell->HasReadonlySel()); pWrtShell->EndPara(); CPPUNIT_ASSERT_EQUAL(false, pWrtShell->HasReadonlySel()); // 2nd paragraph - FORMTEXT pWrtShell->Down(/*bSelect=*/false); // Check selection across FORMTEXT field boundary - must be read-only pWrtShell->SttPara(); pWrtShell->Right(SwCursorSkipMode::Chars, /*bSelect=*/true, 1, /*bBasicCall=*/false); CPPUNIT_ASSERT_EQUAL(true, pWrtShell->HasReadonlySel()); // Test deletion of whole field with single backspace // Previously it only removed right boundary of FORMTEXT, or failed removal at all const IDocumentMarkAccess* pMarksAccess = pDoc->getIDocumentMarkAccess(); sal_Int32 nMarksBefore = pMarksAccess->getAllMarksCount(); pWrtShell->EndPara(); pWrtShell->DelLeft(); sal_Int32 nMarksAfter = pMarksAccess->getAllMarksCount(); CPPUNIT_ASSERT_EQUAL(nMarksBefore, nMarksAfter + 1); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf125151_protected) { // Similar to testTdf105625 except this is in a protected section, // so read-only is already true when fieldmarks are considered. createSwDoc("tdf125151_protected.fodt"); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); // Ensure correct initial setting ScopedConfigValue aCfg(false); pWrtShell->Down(/*bSelect=*/false); // The cursor moved inside of the FieldMark textbox. CPPUNIT_ASSERT_EQUAL_MESSAGE("Readonly 1", false, pWrtShell->HasReadonlySel()); // Move left to the start/definition of the textbox pWrtShell->Left(SwCursorSkipMode::Chars, /*bSelect=*/false, 1, /*bBasicCall=*/false); CPPUNIT_ASSERT_EQUAL_MESSAGE("Readonly 2", true, pWrtShell->HasReadonlySel()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf125151_protectedB) { // Similar to testTdf105625 except this is protected with the Protect_Form compat setting createSwDoc("tdf125151_protectedB.fodt"); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); // Ensure correct initial setting ScopedConfigValue aCfg(false); // The cursor starts inside of the FieldMark textbox. CPPUNIT_ASSERT_EQUAL_MESSAGE("Readonly 1", false, pWrtShell->HasReadonlySel()); // Move left to the start/definition of the textbox pWrtShell->Left(SwCursorSkipMode::Chars, /*bSelect=*/false, 1, /*bBasicCall=*/false); CPPUNIT_ASSERT_EQUAL_MESSAGE("Readonly 2", true, pWrtShell->HasReadonlySel()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf106736) { createSwDoc("tdf106736-grid.odt"); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); sal_Int32 nWidth = getXPath(pXmlDoc, "(//SwParaPortion/SwLineLayout/child::*[@type='PortionType::TabLeft'])[1]", "width") .toInt32(); // In tdf106736, width of tab overflow so that it got // width value around 9200, expected value is around 103 CPPUNIT_ASSERT_MESSAGE("Left Tab width is ~103", nWidth < 150); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testMsWordCompTrailingBlanks) { // The option is true in settings.xml createSwDoc("MsWordCompTrailingBlanksTrue.odt"); SwDoc* pDoc = getSwDoc(); CPPUNIT_ASSERT_EQUAL(true, pDoc->getIDocumentSettingAccess().get( DocumentSettingId::MS_WORD_COMP_TRAILING_BLANKS)); calcLayout(); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); // Check that trailing spaces spans are put into Hole portion if option is enabled assertXPath(pXmlDoc, "/root/page/body/txt", 3); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*", 4); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[1]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[1]", "portion", u"TEST "); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[2]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[2]", "portion", u" "); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[3]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[3]", "portion", u" T"); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[4]", "type", u"PortionType::Hole"); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[4]", "portion", u" "); // All the trailing blanks assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*", 4); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[1]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[1]", "portion", u"TEST "); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[2]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[2]", "portion", u" "); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[3]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[3]", "portion", u" T"); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[4]", "type", u"PortionType::Hole"); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[4]", "portion", u" "); // All the trailing blanks assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*", 4); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[1]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[1]", "portion", u"TEST "); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[2]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[2]", "portion", u" "); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[3]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[3]", "portion", u" T"); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[4]", "type", u"PortionType::Hole"); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[4]", "portion", u" "); // All the trailing blanks // The option is false in settings.xml createSwDoc("MsWordCompTrailingBlanksFalse.odt"); pDoc = getSwDoc(); CPPUNIT_ASSERT_EQUAL(false, pDoc->getIDocumentSettingAccess().get( DocumentSettingId::MS_WORD_COMP_TRAILING_BLANKS)); calcLayout(); pXmlDoc = parseLayoutDump(); // Check that trailing spaces spans are put into Text portions if option is disabled assertXPath(pXmlDoc, "/root/page/body/txt", 3); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*", 5); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[1]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[1]", "portion", u"TEST "); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[2]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[2]", "portion", u" "); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[3]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[3]", "portion", u" T "); // first colored trailing blank span here assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[4]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[4]", "portion", u" "); // second colored trailing blank span here assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[5]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[1]/SwParaPortion/SwLineLayout/child::*[5]", "portion", u" "); // third colored trailing blank span here assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*", 5); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[1]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[1]", "portion", u"TEST "); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[2]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[2]", "portion", u" "); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[3]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[3]", "portion", u" T "); // first colored trailing blank span here assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[4]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[4]", "portion", u" "); // second colored trailing blank span here assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[5]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[2]/SwParaPortion/SwLineLayout/child::*[5]", "portion", u" "); // third colored trailing blank span here assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*", 5); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[1]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[1]", "portion", u"TEST "); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[2]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[2]", "portion", u" "); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[3]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[3]", "portion", u" T "); // first colored trailing blank span here assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[4]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[4]", "portion", u" "); // second colored trailing blank span here assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[5]", "type", u"PortionType::Text"); assertXPath(pXmlDoc, "/root/page/body/txt[3]/SwParaPortion/SwLineLayout/child::*[5]", "portion", u" "); // third colored trailing blank span here // MsWordCompTrailingBlanks option should be false by default in new documents createSwDoc(); pDoc = getSwDoc(); CPPUNIT_ASSERT_EQUAL(false, pDoc->getIDocumentSettingAccess().get( DocumentSettingId::MS_WORD_COMP_TRAILING_BLANKS)); // The option should be true if a .docx, .doc or .rtf document is opened createSwDoc("MsWordCompTrailingBlanks.docx"); pDoc = getSwDoc(); CPPUNIT_ASSERT_EQUAL(true, pDoc->getIDocumentSettingAccess().get( DocumentSettingId::MS_WORD_COMP_TRAILING_BLANKS)); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testCreateDocxAnnotation) { createSwDoc(); // insert an annotation with a text static constexpr OUString aSomeText(u"some text"_ustr); cpo::uno::Sequence aPropertyValues = comphelper::InitPropertySequence({ { "Text", cpo::uno::Any(aSomeText) }, { "Author", cpo::uno::Any(u"me"_ustr) }, }); dispatchCommand(mxComponent, u".uno:InsertAnnotation"_ustr, aPropertyValues); // Save it as DOCX & load it again saveAndReload(TestFilter::DOCX); // get the annotation uno::Reference xTextFieldsSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xFieldsAccess( xTextFieldsSupplier->getTextFields()); uno::Reference xFields(xFieldsAccess->createEnumeration()); uno::Reference xField(xFields->nextElement(), uno::UNO_QUERY); // this was empty instead of "some text" CPPUNIT_ASSERT_EQUAL(aSomeText, xField->getPropertyValue(u"Content"_ustr).get()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf107976) { // Create a document and create two transferables. createSwDoc(); SwWrtShell& rShell = *getSwDocShell()->GetWrtShell(); rtl::Reference pTransferable(new SwTransferable(rShell)); rtl::Reference pTransferable2(new SwTransferable(rShell)); // Now close the document. mxComponent->dispose(); mxComponent.clear(); // This failed: the first shell had a pointer to the deleted shell. CPPUNIT_ASSERT(!pTransferable->GetShell()); CPPUNIT_ASSERT(!pTransferable2->GetShell()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf58604) { #ifdef _WIN32 // Allow linebreak character follows hanging punctuation immediately instead of // breaking at the start of the next line. createSwDoc("tdf58604.odt"); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); CPPUNIT_ASSERT_EQUAL( OUString("PortionType::Break"), getXPath(pXmlDoc, "(/root/page/body/txt/SwParaPortion/SwLineLayout[1]/child::*)[last()]", "type")); #endif } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf112025) { mergeDocs("fdo112025.odt", "fdo112025-insert.docx"); CPPUNIT_ASSERT_EQUAL(3, getParagraphs()); uno::Reference xStyle( getStyles(u"PageStyles"_ustr)->getByName(u"Standard"_ustr), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(true, getProperty(xStyle, u"IsLandscape"_ustr)); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf72942) { mergeDocs("fdo72942.docx", "fdo72942-insert.docx"); CPPUNIT_ASSERT_EQUAL(7, getParagraphs()); // check styles of paragraphs added from [fdo72942.docx] const uno::Reference xRun1 = getRun(getParagraph(1), 1); CPPUNIT_ASSERT_EQUAL(u"Default English (Liberation serif) text with "_ustr, xRun1->getString()); CPPUNIT_ASSERT_EQUAL(u"Liberation Serif"_ustr, getProperty(xRun1, u"CharFontName"_ustr)); const uno::Reference xRun2 = getRun(getParagraph(2), 1); CPPUNIT_ASSERT_EQUAL(u"Header 1 English text (Liberation sans) with "_ustr, xRun2->getString()); CPPUNIT_ASSERT_EQUAL(u"Liberation Sans"_ustr, getProperty(xRun2, u"CharFontName"_ustr)); // check styles of paragraphs added from [fdo72942-insert.docx] const uno::Reference xRun3 = getRun(getParagraph(4), 1); CPPUNIT_ASSERT_EQUAL(u"Default German text (Calibri) with "_ustr, xRun3->getString()); CPPUNIT_ASSERT_EQUAL(u"Liberation Serif"_ustr, getProperty(xRun3, u"CharFontName"_ustr)); const uno::Reference xRun4 = getRun(getParagraph(5), 1); CPPUNIT_ASSERT_EQUAL(u"Header 1 German text (Calibri Light) with "_ustr, xRun4->getString()); CPPUNIT_ASSERT_EQUAL(u"Liberation Sans"_ustr, getProperty(xRun4, u"CharFontName"_ustr)); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf114306) { createSwDoc("fdo114306.odt"); xmlDocUniquePtr pXmlDoc = parseLayoutDump(); // There are 2 long paragraphs in cell A1. // A part of paragraph 2 should flow over to the second page but // *not* the whole paragraph. There should be 2 paragraphs on // page 1 and 1 paragraph on page 2. assertXPath(pXmlDoc, "/root/page[1]/body/tab[1]/row[1]/cell[1]/txt", 2); assertXPath(pXmlDoc, "/root/page[2]/body/tab[1]/row[1]/cell[1]/txt", 1); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf114306_2) { // tdf#114306 fix unexpected page break in row-spanned table // load regression document without writer crash createSwDoc("fdo114306_2.odt"); // correct number of pages CPPUNIT_ASSERT_EQUAL(4, getPages()); } // During insert of the document with list inside into the main document inside the list // we should merge both lists into one, when they have the same list properties CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf113877) { mergeDocs("tdf113877_insert_numbered_list.odt", "tdf113877_insert_numbered_list.odt"); const OUString listId1 = getProperty(getParagraph(1), u"ListId"_ustr); const OUString listId4 = getProperty(getParagraph(4), u"ListId"_ustr); const OUString listId5 = getProperty(getParagraph(5), u"ListId"_ustr); const OUString listId6 = getProperty(getParagraph(6), u"ListId"_ustr); const OUString listId7 = getProperty(getParagraph(7), u"ListId"_ustr); // the initial list with 4 list items CPPUNIT_ASSERT_EQUAL(listId1, listId4); // the last of the first list, and the first of the inserted list CPPUNIT_ASSERT_EQUAL(listId4, listId5); CPPUNIT_ASSERT_EQUAL(listId5, listId6); CPPUNIT_ASSERT_EQUAL(listId6, listId7); } // The same test as testTdf113877() but merging of two list should not be performed. CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf113877NoMerge) { mergeDocs("tdf113877_insert_numbered_list.odt", "tdf113877_insert_numbered_list_abcd.odt"); const OUString listId1 = getProperty(getParagraph(1), u"ListId"_ustr); const OUString listId4 = getProperty(getParagraph(4), u"ListId"_ustr); const OUString listId5 = getProperty(getParagraph(5), u"ListId"_ustr); const OUString listId6 = getProperty(getParagraph(6), u"ListId"_ustr); const OUString listId7 = getProperty(getParagraph(7), u"ListId"_ustr); // the initial list with 4 list items CPPUNIT_ASSERT_EQUAL(listId1, listId4); // the last of the first list, and the first of the inserted list CPPUNIT_ASSERT(listId4 != listId5); CPPUNIT_ASSERT_EQUAL(listId5, listId6); CPPUNIT_ASSERT(listId6 != listId7); } // Related test to testTdf113877(): Inserting into empty document a new document with list. // Insert position has NO its own paragraph style ("Standard" will be used). // // Resulting document should be the same for following tests: // - testTdf113877_default_style() // - testTdf113877_Standard_style() // CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf113877_default_style) { mergeDocs(nullptr, "tdf113877_insert_numbered_list_abcd.odt"); const OUString listId1 = getProperty(getParagraph(1), u"ListId"_ustr); const OUString listId2 = getProperty(getParagraph(2), u"ListId"_ustr); const OUString listId3 = getProperty(getParagraph(3), u"ListId"_ustr); CPPUNIT_ASSERT_EQUAL(listId1, listId2); CPPUNIT_ASSERT_EQUAL(listId1, listId3); } // Related test to testTdf113877(): Inserting into empty document a new document with list. // Insert position has its own paragraph style derived from "Standard", but this style is the same as "Standard". // // Resulting document should be the same for following tests: // - testTdf113877_default_style() // - testTdf113877_Standard_style() // CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf113877_Standard_style) { mergeDocs("tdf113877_blank_ownStandard.odt", "tdf113877_insert_numbered_list_abcd.odt"); const OUString listId1 = getProperty(getParagraph(1), u"ListId"_ustr); const OUString listId2 = getProperty(getParagraph(2), u"ListId"_ustr); const OUString listId3 = getProperty(getParagraph(3), u"ListId"_ustr); CPPUNIT_ASSERT_EQUAL(listId1, listId2); CPPUNIT_ASSERT_EQUAL(listId1, listId3); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf113877_blank_bold_on) { mergeDocs("tdf113877_blank_bold_on.odt", "tdf113877_insert_numbered_list_abcd.odt"); const OUString listId1 = getProperty(getParagraph(1), u"ListId"_ustr); const OUString listId2 = getProperty(getParagraph(2), u"ListId"_ustr); const OUString listId3 = getProperty(getParagraph(3), u"ListId"_ustr); CPPUNIT_ASSERT_EQUAL(listId1, listId2); CPPUNIT_ASSERT_EQUAL(listId1, listId3); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf107975) { // This test also covers tdf#117185 tdf#110442 createSwDoc("tdf107975.odt"); uno::Reference xTextGraphicObjectsSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xIndexAccess( xTextGraphicObjectsSupplier->getGraphicObjects(), uno::UNO_QUERY); uno::Reference xShape(xIndexAccess->getByIndex(0), uno::UNO_QUERY); CPPUNIT_ASSERT_EQUAL(text::TextContentAnchorType_AT_CHARACTER, getProperty(xShape, u"AnchorType"_ustr)); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xIndexAccess->getCount()); dispatchCommand(mxComponent, u".uno:SelectAll"_ustr, {}); dispatchCommand(mxComponent, u".uno:Copy"_ustr, {}); //Position the mouse cursor (caret) after "ABC" below the blue image dispatchCommand(mxComponent, u".uno:GoRight"_ustr, {}); dispatchCommand(mxComponent, u".uno:Paste"_ustr, {}); // without the fix, it crashes CPPUNIT_ASSERT_EQUAL(sal_Int32(2), xIndexAccess->getCount()); CPPUNIT_ASSERT_EQUAL(u"ABC"_ustr, getParagraph(1)->getString()); dispatchCommand(mxComponent, u".uno:Undo"_ustr, {}); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xIndexAccess->getCount()); dispatchCommand(mxComponent, u".uno:Redo"_ustr, {}); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), xIndexAccess->getCount()); dispatchCommand(mxComponent, u".uno:Undo"_ustr, {}); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xIndexAccess->getCount()); dispatchCommand(mxComponent, u".uno:Redo"_ustr, {}); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), xIndexAccess->getCount()); dispatchCommand(mxComponent, u".uno:Undo"_ustr, {}); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xIndexAccess->getCount()); //try again with anchor at start of doc which is another special case xShape.set(xIndexAccess->getByIndex(0), uno::UNO_QUERY); uno::Reference xShapeContent(xShape, uno::UNO_QUERY); uno::Reference xTextDocument(mxComponent, uno::UNO_QUERY); uno::Reference const xStart = xTextDocument->getText()->getStart(); xShapeContent->attach(xStart); CPPUNIT_ASSERT_EQUAL(text::TextContentAnchorType_AT_CHARACTER, getProperty(xShape, u"AnchorType"_ustr)); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xIndexAccess->getCount()); dispatchCommand(mxComponent, u".uno:SelectAll"_ustr, {}); dispatchCommand(mxComponent, u".uno:Copy"_ustr, {}); //Position the mouse cursor (caret) after "ABC" below the blue image dispatchCommand(mxComponent, u".uno:GoRight"_ustr, {}); dispatchCommand(mxComponent, u".uno:Paste"_ustr, {}); // Fails quite a lot on multiple Jenkins slaves, but entirely reliably, // with: // sw/qa/extras/uiwriter/uiwriter4.cxx(2407) : error : Assertion // - Expected: 2 // - Actual : 1 // i.e. the xIndexAccess->getCount() line. #if 0 // without the fix, it crashes CPPUNIT_ASSERT_EQUAL(sal_Int32(2), xIndexAccess->getCount()); CPPUNIT_ASSERT_EQUAL(OUString("ABC"), getParagraph(1)->getString()); dispatchCommand(mxComponent, ".uno:Undo", {}); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xIndexAccess->getCount()); dispatchCommand(mxComponent, ".uno:Redo", {}); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), xIndexAccess->getCount()); dispatchCommand(mxComponent, ".uno:Undo", {}); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xIndexAccess->getCount()); dispatchCommand(mxComponent, ".uno:Redo", {}); CPPUNIT_ASSERT_EQUAL(sal_Int32(2), xIndexAccess->getCount()); dispatchCommand(mxComponent, ".uno:Undo", {}); CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xIndexAccess->getCount()); #endif } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf113877_blank_bold_off) { mergeDocs("tdf113877_blank_bold_off.odt", "tdf113877_insert_numbered_list_abcd.odt"); const OUString listId1 = getProperty(getParagraph(1), u"ListId"_ustr); const OUString listId2 = getProperty(getParagraph(2), u"ListId"_ustr); const OUString listId3 = getProperty(getParagraph(3), u"ListId"_ustr); CPPUNIT_ASSERT_EQUAL(listId1, listId2); CPPUNIT_ASSERT_EQUAL(listId1, listId3); } // just care that this does crash/assert CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testRhbz1810732) { mergeDocs(nullptr, "rhbz1810732.docx"); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf142157) { mergeDocs(nullptr, "tdf142157.odt"); uno::Reference xTextSectionsSupplier(mxComponent, uno::UNO_QUERY); uno::Reference xSections(xTextSectionsSupplier->getTextSections(), uno::UNO_QUERY); // Without the fix in place, this test would have failed with // - Expected: 1 // - Actual : 0 CPPUNIT_ASSERT_EQUAL(sal_Int32(1), xSections->getCount()); } CPPUNIT_TEST_FIXTURE(SwUiWriterTest4, testTdf143320) { createSwDoc("tdf143320.odt"); SwWrtShell* pWrtShell = getSwDocShell()->GetWrtShell(); CPPUNIT_ASSERT_EQUAL(1, getPages()); CPPUNIT_ASSERT(getParagraph(1)->getString().startsWith("x")); dispatchCommand(mxComponent, u".uno:SelectAll"_ustr, {}); dispatchCommand(mxComponent, u".uno:Copy"_ustr, {}); // Create a new document createSwDoc(); pWrtShell = getSwDocShell()->GetWrtShell(); CPPUNIT_ASSERT(pWrtShell); dispatchCommand(mxComponent, u".uno:Paste"_ustr, {}); CPPUNIT_ASSERT_EQUAL(1, getPages()); CPPUNIT_ASSERT(getParagraph(1)->getString().startsWith("x")); dispatchCommand(mxComponent, u".uno:Undo"_ustr, {}); CPPUNIT_ASSERT_EQUAL(1, getPages()); CPPUNIT_ASSERT_EQUAL(u""_ustr, getParagraph(1)->getString()); // Without the fix in place, this test would have crashed here dispatchCommand(mxComponent, u".uno:Paste"_ustr, {}); CPPUNIT_ASSERT_EQUAL(1, getPages()); CPPUNIT_ASSERT(getParagraph(1)->getString().startsWith("x")); } CPPUNIT_PLUGIN_IMPLEMENT(); /* vim:set shiftwidth=4 softtabstop=4 expandtab: */